| 國立成功大學 |
2008-12-23 |
Free vibration of non-uniform Euler-Bernoulli beams with general elastically end constraints using Adomian modified decomposition method
|
Hsu, Jung-Chang; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2008-12 |
An innovative eigenvalue problem solver for free vibration of Euler-Bernoulli beam by using the Adomian decomposition method
|
Lai, Hsin-Yi; Hsu, Jung-Chang; Chen, Cha'o-Kuang |
| 國立成功大學 |
2008-12 |
Production Control and Characterization of Bilayer-Surfactant Coated Stable Water-Soluble Monodisperse Magnetic Iron Oxide Nanoparticle
|
Chen, Chih-Jung; Lai, Hsin-Yi |
| 國立成功大學 |
2008-09 |
Free Vibration of Non-Uniform Euler-Bernoulli Beams by the Adomian Modified Decomposition Method
|
Lai, Hsin-Yi; Chen, Cha'o-Kuang; Hsu, Jung-Chang |
| 國立成功大學 |
2008-06-25 |
Pressure-induced solid-state lattice mending of nanopores by pulse laser annealing
|
Huang, Pei-Hsing; Lai, Hsin-Yi |
| 國立成功大學 |
2008-03-15 |
Laser-irradiated thermodynamic behaviors of spallation and recombination at solid-state interface
|
Lai, Hsin-Yi; Huang, Pei-Hsing |
| 國立成功大學 |
2008-03 |
Synthesis of monodisperse magnetic iron oxide nanoparticles from submicrometer hematite powders
|
Cheng, Chih-Jung; Lin, Chee-Cheng; Chiang, Ray-Kuang; Lin, Chun-Rong; Lyubutin, Igor S.; Alkaev, Egor A.; Lai, Hsin-Yi |
| 國立成功大學 |
2008-03 |
Nucleation and propagation of dislocations during nanopore lattice mending by laser annealing: Modified continuum-atomistic modeling
|
Huang, Pei-Hsing; Lai, Hsin-Yi |
| 國立成功大學 |
2008-02 |
Optimizing maximum equivalent strain on solder balls in flip-chip packages
|
Wu, Gien-Huang; Ju, Shen-Haw; Hsu, T. C.; Lai, Hsin-Yi; Hwang, Wen-Miin |
| 國立成功大學 |
2008-02 |
Atomistic simulations of spallation dynamics in multilayer thin-film interface excited by femtosecond laser
|
Lai, Hsin-Yi; Huang, Pei-Hsing |
| 國立成功大學 |
2008-01 |
Growth and characterization of epitaxial ZnO nanowall networks using metal organic chemical vapor deposition
|
Wu, Chia-Cheng; Wuu, Dong-Sing; Chen, Tsai-Ning; Yu, Ting-En; Lin, Po-Rung; Horng, Ray-Hua; Lai, Hsin-Yi |
| 國立臺灣大學 |
2008 |
Ct of Two Hearts Beating in One Chest
|
賴欣宜; 陳中和; 邱冠明; 王高倫; 張永強; 李愛先; 朱樹勳; LAI, HSIN-YI; CHEN, JEON-HOR; CHIU, KUAN- MING; WANG, KAO-LUN; CHEUNG, WING-KEUNG; LI, AI-HSIEN; CHU, SHU-HSUN |
| 國立成功大學 |
2007-12 |
Molecular dynamics analyses of the femtosecond laser-induced grain boundary spallation
|
Lai, Hsin-Yi; Huang, Pei-Hsing |
| 國立成功大學 |
2007-03 |
Microscopic spallation mechanisms induced by a pulse laser at the solid-state interface
|
Lai, Hsin-Yi; Huang, Pei-Hsing; Fang, T. H. |
| 國立成功大學 |
2007-02 |
A systematic data integration technique for mold-surface polishing processes planning
|
Lai, Hsin-Yi; Huang, Chin-Tzwu |
| 國立成功大學 |
2006-06 |
Nonlinear stability analysis of thin film flow from a liquid jet impinging on a circular concentric disk
|
Cheng, Po-Jen; Lai, Hsin-Yi |
| 國立虎尾科技大學 |
2006 |
Surface Fine Grinding via a Regenerative Grinding Methodology
|
Lai, Hsin-Yi;Chen, Chao'-Kuang |
| 國立成功大學 |
2004-11 |
A systematic approach for automatic assembly sequence plan generation
|
Lai, Hsin-Yi; Huang, Chin-Tzwu |
| 國立成功大學 |
2003-11-20 |
Integrated assembly plan generation system for grouped product families
|
Lai, Hsin-Yi; Huang, Chin-Tzwu |
| 國立成功大學 |
2003-03 |
Chaotic and bifurcation dynamics of a simply-supported thermo-elastic circular plate with variable thickness in large deflection
|
Yeh, Yen-Liang; Chen, Cha'o-Kuang; Lai, Hsin-Yi |
| 國立成功大學 |
2003 |
Quality assurance for concave-arc ball-end milling cutters
|
Chen, W. F.; Lai, Hsin-Yi; Chen, C. K. |
| 國立成功大學 |
2002-08 |
Design and NC machining of concave-arc ball-end milling cutters
|
Chen, W. F.; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2002-06 |
Chaotic and bifurcation dynamics for a simply supported rectangular plate of thermo-mechanical coupling in large deflection
|
Yeh, Yen-Liang; Chen, Cha'o-Kuang; Lai, Hsin-Yi |
| 國立成功大學 |
2002-03 |
Double-mode modeling of chaotic and bifurcation dynamics for a simply supported rectangular plate in large deflection
|
Lai, Hsin-Yi; Chen, Cha'o-Kuang; Yeh, Yen-Liang |
| 國立成功大學 |
2002 |
A comprehensive engineering model for the design, manufacture and assembly of helical carpenter shapers
|
Chen, W. F.; Lai, Hsin-Yi |
| 國立成功大學 |
2002 |
An enhanced DFM model for shaper cutters
|
Lai, Hsin-Yi; Wu, D. S. |
| 國立成功大學 |
2002 |
A high-precision surface grinding model for general ball-end milling cutters
|
Lai, Hsin-Yi |
| 國立成功大學 |
2002 |
Precision design and numerical control machining of tapered ball-end milling cutters
|
Lai, Hsin-Yi; Chen, W. F. |
| 國立成功大學 |
2002 |
Mathematical modelling of elliptic helicoid screw transmission systems
|
Wu, D. S.; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2001-06-15 |
Nonlinear stability analysis of the thin pseudoplastic liquid film flowing down along a vertical wall
|
Cheng, Po-Jen; Chen, Cha'o-Kuang; Lai, Hsin-Yi |
| 國立成功大學 |
2001-06 |
Nonlinear stability analysis of the thin micropolar liquid film flowing down on a vertical cylinder
|
Cheng, Po-Jen; Chen, Cha'o-Kuang; Lai, Hsin-Yi |
| 國立成功大學 |
2001-03 |
Nonlinear stability analysis of thin viscoelastic film flow traveling down along a vertical cylinder
|
Cheng, Po-Jen; Chen, Cha'o-Kuang; Lai, Hsin-Yi |
| 國立成功大學 |
2001 |
A high-precision circular helicoidal surface meshing model for producing high-performance lead screws
|
Lai, Hsin-Yi; Chen, Cha'o-Kuang; Wu, D. S. |
| 國立成功大學 |
2001 |
A precision tool model for concave cone-end milling cutters
|
Chen, W. F.; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2001 |
A study of manufacturing models for ball-end type rotating cutters with constant pitch helical grooves
|
Chen, Cha'o-Kuang; Lai, Hsin-Yi |
| 國立成功大學 |
2001 |
A mathematical model for manufacturing ball-end cutters using a two-axis NC machine
|
Lin, S. W.; Lai, Hsin-Yi |
| 國立成功大學 |
2001 |
A high-precision tool model for helical pinion cutters
|
Chen, Cha'o-Kuang; Lai, Hsin-Yi; Wu, Chang-Tzuoh; Li, Tong-Jue |
| 國立成功大學 |
2001 |
A new approach to enhance the manufacturing accuracy of the cylindrical worm using measured circular-arc helicoidal profile data
|
Wu, D. S.; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2000-11 |
Study on drag forces of the molding flow in IC packaging using optical fiber sensors
|
Lo, Yu-Lung; Lai, Hsin-Yi; Tsai, Ming-Hong |
| 國立成功大學 |
2000-10 |
Precision modeling of form errors for cylindricity evaluation using genetic algorithms
|
Lai, Hsin-Yi; Jywe, Wen-Yuh; Chen, Cha'o-Kuang; Liu, Chien-Hong |
| 國立成功大學 |
2000-07-21 |
Stability analysis of thin viscoelastic liquid film flowing down on a vertical wall
|
Cheng, Po-Jen; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2000-06 |
A new method for circular grid analysis in the sheet metal forming lest
|
Wang, Chi-Chang; Lee, J.; Chen, Lien-Wen; Lai, Hsin-Yi |
| 國立成功大學 |
2000-04-03 |
Machine tool setting for the manufacturing of spherical cams
|
Wei, Eing-Jer; Lai, Hsin-Yi; Chen, Cha'o-Kuang |
| 國立成功大學 |
2000-03 |
Performance evaluation of SCORF systems using lubrication and undercutting indices
|
Lai, Hsin-Yi; Wie, Eing-Jer |
| 國立成功大學 |
2000-01-25 |
Developing stable optical fiber refractometers using PMDI with two-parallel Fabry-Perots
|
Lo, Yu-Lung; Lai, Hsin-Yi; Wang, Wern-Cheng |
| 國立成功大學 |
2000-01-01 |
Mathematical modeling of the wall effect on drag forces in molding flow using optical fiber sensing data
|
Lo, Yu-Lung; Lai, Hsin-Yi; Tsai, Ming-Hong |
| 國立成功大學 |
1998 |
Study on meshing characteristic of spherical cam-oscillating roller-follower mechanisms
|
Wei, Eing-Jer; Lai, Hsin-Yi; Chen, Cha`o-Kuang |
