| 國立成功大學 |
2022-06-07 |
光點陣列掃描系統及其方法
|
李永春;LEE, YUNG-CHUN;許永昕;SYU, YONG-SIN;吳俊穎;WU, CHUN-YING;苗庭瑄;MIAU, TING-HSUAN |
| 國立成功大學 |
2016-09 |
Deastigmatism, circularization, and focusing of a laser diode beam using a single biconvex microlens
|
Hasan, Md Nazmul; Haque, Muttahid-Ull; Lee, Yung Chun |
| 國立成功大學 |
2016-07 |
Unified fabrication process for complex gratings
|
Ho, Chi-Chun; Chen, Jung-San; Lin, Chia-Heng; Lee, Yung-Chun; Chen, Yu-Bin |
| 國立成功大學 |
2016-06 |
Non-immersive Ultrasound Scanning and Inspection of Internal Defects Using a Water Droplet Coupling Device
|
Kuo, Chi-Tse; Lee, Yung-Chun |
| 國立成功大學 |
2016-04-18 |
Contact photolithography using a carbon-black embedded soft photomask and ultraviolet light emitting diodes with application on patterned sapphire substrates
|
Hsieh, Heng; Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2016-01-25 |
Fabrication of seamless roller mold with 3D micropatterns using inner curved surface photolithography
|
Tsai, Sung-Wen; Chen, Po-Yu; Huang, Shr-Ren; Lee, Yung-Chun |
| 國立成功大學 |
2015-12-09 |
Digital roller mold manufacturing system
|
Lee, Yung-Chun;Chien, Hung-Liang |
| 國立成功大學 |
2015-09 |
Cylindrical Rayleigh surface waves on a layer-coated cylinder measured by PVDF transducer and defocusing measurement method
|
Lin, Chun-I; Lu, Yan; He, Cunfu; Song, Guorong; Lee, Yung-Chun |
| 國立成功大學 |
2015-06-29 |
Photomask and method for manufacturing photomask
|
Lee, Yung-Chun;Wu, Chun-Ying;Hsieh, Heng;Hsieh, Yi-Ta;Yan, Jhih-Nan |
| 國立成功大學 |
2015-06 |
Tempering Hemispherical Radiative Properties with a Resonance Compilation
|
Chen, Yu-Bin; Lee, Yung-Chun; Chang, Yu-Fan; Lin, Yao-Hua; Chen, Peng-Hsiang |
| 國立成功大學 |
2015-02-23 |
Beam pen lithography based on focused laser diode beam with single microlens fabricated by excimer laser
|
Hasan, Md. Nazmul; Lee, Yung-Chun |
| 國立成功大學 |
2014-12 |
Elastic Properties Inversion of an Isotropic Plate by Hybrid Particle Swarm-Based-Simulated Annealing Optimization Technique from Leaky Lamb Wave Measurements Using Acoustic Microscopy
|
Yan, Lu; He Cunfu; Song Guorong; Bin, Wu; Chung, Cheng-Hsien; Lee, Yung-Chun |
| 國立成功大學 |
2014-08-01 |
Enhanced performance of polymer solar cells with imprinted nanostructures on the active layer
|
Chen, Bo-Cheng; Cheng, Yu-Shun; Gau, Chie; Lee, Yung-Chun |
| 國立成功大學 |
2014-08 |
A soft photo-mask with embedded carbon black and its application in contact photolithography
|
Hsieh, Yi-Ta; Hsieh, Heng; Lee, Yung-Chun |
| 國立成功大學 |
2014-06-25 |
A metal-embedded photo-mask for contact photolithography with application on patterned sapphire substrate
|
Yan, Jhih-Nan; Chang, Cho-Wei; Lee, Yung-Chun |
| 國立成功大學 |
2014-06 |
A Soft PDMS/Metal-Film Photo-Mask for Large-Area Contact Photolithography at Sub-Micrometer Scale With Application on Patterned Sapphire Substrates
|
Hsieh, Yi-Ta; Lee, Yung-Chun |
| 國立成功大學 |
2014-05-05 |
A pertureless beam pen lithography based on fully metal-coated polyurethane-acrylate (PUA) pyramidal microstructure array
|
Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2014-04-07 |
Photolithographic patterning at sub-micrometer scale using a three-dimensional soft photo-mask with application on localized surface plasma resonance
|
Chen, Yu-Zen; Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Acoustoelastic and Acoustoplastic Effects of Polymethylmethacrylate Measured by V(f, z) Defocusing Measurement System
|
Lin, Chun-I; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Fabrication of three-dimensional and submicrometer-scaled microstructures based on metal contact printing and silicon bulk machining
|
Kao, Kuo-Lun; Chang, Cho-Wei; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Beam pen lithography based on arrayed polydimethylsiloxane (PDMS) micro-pyramids spin-coated with carbon black photo-resist
|
Chen, Yu-Zen; Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography
|
Tsai, Sung-Wen; Chen, Po-Yu; Lee, Yung-Chun |
| 國立成功大學 |
2014-01 |
Fabrication of ball-strip convex microlens array using seamless roller mold patterned by curved surface lithography technique
|
Tsai, Sung-Wen; Lee, Yung-Chun |
| 國立成功大學 |
2013-08 |
Microwell Chips for Selection of Bio-macromolecules that Increase the Differentiation Capacities of Mesenchymal Stem Cells
|
Hsu, Shan-hui; Ni, Yu-Hui; Lee, Yung-Chun |
| 國立成功大學 |
2013-07 |
Fabrication of hexagonally arrayed micro-structures with axially symmetrical surface profile by tri-axial excimer laser scanning
|
Chiu, Chi-Cheng; Lee, Yung-Chun |
