| 國立成功大學 |
2022-06-07 |
光點陣列掃描系統及其方法
|
李永春;LEE, YUNG-CHUN;許永昕;SYU, YONG-SIN;吳俊穎;WU, CHUN-YING;苗庭瑄;MIAU, TING-HSUAN |
| 國立成功大學 |
2016-09 |
Deastigmatism, circularization, and focusing of a laser diode beam using a single biconvex microlens
|
Hasan, Md Nazmul; Haque, Muttahid-Ull; Lee, Yung Chun |
| 國立成功大學 |
2016-07 |
Unified fabrication process for complex gratings
|
Ho, Chi-Chun; Chen, Jung-San; Lin, Chia-Heng; Lee, Yung-Chun; Chen, Yu-Bin |
| 國立成功大學 |
2016-06 |
Non-immersive Ultrasound Scanning and Inspection of Internal Defects Using a Water Droplet Coupling Device
|
Kuo, Chi-Tse; Lee, Yung-Chun |
| 國立成功大學 |
2016-04-18 |
Contact photolithography using a carbon-black embedded soft photomask and ultraviolet light emitting diodes with application on patterned sapphire substrates
|
Hsieh, Heng; Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2016-01-25 |
Fabrication of seamless roller mold with 3D micropatterns using inner curved surface photolithography
|
Tsai, Sung-Wen; Chen, Po-Yu; Huang, Shr-Ren; Lee, Yung-Chun |
| 國立成功大學 |
2015-12-09 |
Digital roller mold manufacturing system
|
Lee, Yung-Chun;Chien, Hung-Liang |
| 國立成功大學 |
2015-09 |
Cylindrical Rayleigh surface waves on a layer-coated cylinder measured by PVDF transducer and defocusing measurement method
|
Lin, Chun-I; Lu, Yan; He, Cunfu; Song, Guorong; Lee, Yung-Chun |
| 國立成功大學 |
2015-06-29 |
Photomask and method for manufacturing photomask
|
Lee, Yung-Chun;Wu, Chun-Ying;Hsieh, Heng;Hsieh, Yi-Ta;Yan, Jhih-Nan |
| 國立成功大學 |
2015-06 |
Tempering Hemispherical Radiative Properties with a Resonance Compilation
|
Chen, Yu-Bin; Lee, Yung-Chun; Chang, Yu-Fan; Lin, Yao-Hua; Chen, Peng-Hsiang |
| 國立成功大學 |
2015-02-23 |
Beam pen lithography based on focused laser diode beam with single microlens fabricated by excimer laser
|
Hasan, Md. Nazmul; Lee, Yung-Chun |
| 國立成功大學 |
2014-12 |
Elastic Properties Inversion of an Isotropic Plate by Hybrid Particle Swarm-Based-Simulated Annealing Optimization Technique from Leaky Lamb Wave Measurements Using Acoustic Microscopy
|
Yan, Lu; He Cunfu; Song Guorong; Bin, Wu; Chung, Cheng-Hsien; Lee, Yung-Chun |
| 國立成功大學 |
2014-08-01 |
Enhanced performance of polymer solar cells with imprinted nanostructures on the active layer
|
Chen, Bo-Cheng; Cheng, Yu-Shun; Gau, Chie; Lee, Yung-Chun |
| 國立成功大學 |
2014-08 |
A soft photo-mask with embedded carbon black and its application in contact photolithography
|
Hsieh, Yi-Ta; Hsieh, Heng; Lee, Yung-Chun |
| 國立成功大學 |
2014-06-25 |
A metal-embedded photo-mask for contact photolithography with application on patterned sapphire substrate
|
Yan, Jhih-Nan; Chang, Cho-Wei; Lee, Yung-Chun |
| 國立成功大學 |
2014-06 |
A Soft PDMS/Metal-Film Photo-Mask for Large-Area Contact Photolithography at Sub-Micrometer Scale With Application on Patterned Sapphire Substrates
|
Hsieh, Yi-Ta; Lee, Yung-Chun |
| 國立成功大學 |
2014-05-05 |
A pertureless beam pen lithography based on fully metal-coated polyurethane-acrylate (PUA) pyramidal microstructure array
|
Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2014-04-07 |
Photolithographic patterning at sub-micrometer scale using a three-dimensional soft photo-mask with application on localized surface plasma resonance
|
Chen, Yu-Zen; Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Acoustoelastic and Acoustoplastic Effects of Polymethylmethacrylate Measured by V(f, z) Defocusing Measurement System
|
Lin, Chun-I; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Fabrication of three-dimensional and submicrometer-scaled microstructures based on metal contact printing and silicon bulk machining
|
Kao, Kuo-Lun; Chang, Cho-Wei; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Beam pen lithography based on arrayed polydimethylsiloxane (PDMS) micro-pyramids spin-coated with carbon black photo-resist
|
Chen, Yu-Zen; Wu, Chun-Ying; Lee, Yung-Chun |
| 國立成功大學 |
2014-04 |
Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography
|
Tsai, Sung-Wen; Chen, Po-Yu; Lee, Yung-Chun |
| 國立成功大學 |
2014-01 |
Fabrication of ball-strip convex microlens array using seamless roller mold patterned by curved surface lithography technique
|
Tsai, Sung-Wen; Lee, Yung-Chun |
| 國立成功大學 |
2013-08 |
Microwell Chips for Selection of Bio-macromolecules that Increase the Differentiation Capacities of Mesenchymal Stem Cells
|
Hsu, Shan-hui; Ni, Yu-Hui; Lee, Yung-Chun |
| 國立成功大學 |
2013-07 |
Fabrication of hexagonally arrayed micro-structures with axially symmetrical surface profile by tri-axial excimer laser scanning
|
Chiu, Chi-Cheng; Lee, Yung-Chun |
| 國立成功大學 |
2013-05 |
Fabrication of metal roller mold with submicrometer feature size using contact printing photolithography technique
|
Huang, Kuo-Feng; Lee, Yung-Chun |
| 國立成功大學 |
2013-02-11 |
Fabrication of arrayed metallic nano-particles on a flexible substrate for inducing localized surface plasmon resonance
|
Chen, Chun-Hung; Lee, Yung-Chun |
| 國立成功大學 |
2013-01 |
Metal contact printing photolithography for fabrication of submicrometer patterned sapphire substrates for light-emitting diodes
|
Hsieh, Yi-Ta; Lee, Yung-Chun |
| 國立成功大學 |
2012-11 |
Particle focusing in a contactless dielectrophoretic microfluidic chip with insulating structures
|
Jen, Chun-Ping; Maslov, Nikolay A.; Shih, Hsin-Yuan; Lee, Yung-Chun; Hsiao, Fei-Bin |
| 國立成功大學 |
2012-09 |
Possibility of quantifying TCM finger-reading sensations: I. Bi-Sensing Pulse Diagnosis Instrument
|
Luo, Ching-Hsing; Chung, Yu-Feng; Hu, Chung-Shing; Yeh, Cheng-Chang; Si, Xiao-Chen; Feng, Da-Hsuan; Lee, Yung-Chun; Huang, Shin-I; Yeh, Shu-Ming; Liang, Chi-Hsien |
| 國立成功大學 |
2012-04-19 |
New Pentacene Crystalline Phase Induced by Nanoimprinted Polyimide Gratings
|
Chou, Wei-Yang; Chang, Ming-Hua; Cheng, Horng-Long; Lee, Yung-Chun; Chang, Chung-Chih; Sheu, Hwo-Shuenn |
| 國立成功大學 |
2012-04 |
Fabrication of Seamless Roller Mold for Continuous Roller Imprinting of Microlens Array Films
|
Lee, Yung-Chun; Chen, Hong-Wei; Hsiao, Fei-Bin |
| 國立成功大學 |
2012-03-12 |
Excimer laser micromachining of aspheric microlens arrays based on optimal contour mask design and laser dragging method
|
Chiu, Chi-Cheng; Lee, Yung-Chun |
| 國立成功大學 |
2011-10-31 |
Nanoimprinting-induced efficiency enhancement in organic solar cells
|
Chou, Wei-Yang; Chang, Jay; Yen, Chia-Te; Tang, Fu-Ching; Cheng, Horng-Long; Chang, Ming-Hua; Hsu, Steve Lien-Chung; Chen, Jen-Sue; Lee, Yung-Chun |
| 國立成功大學 |
2011-09 |
Fabricating of aspheric micro-lens array by excimer laser micromachining
|
Chiu, Chi-Cheng; Lee, Yung-Chun |
| 國立成功大學 |
2011-08 |
Direct Metal Transfer Lithography for Fabricating Wire-Grid Polarizer on Flexible Plastic Substrate
|
Chen, Chun-Hung; Yu, Te-Hui; Lee, Yung-Chun |
| 國立成功大學 |
2011-06 |
Investigation of GaN-Based Light-Emitting Diodes Grown on Patterned Sapphire Substrates by Contact-Transferred and Mask-Embedded Lithography
|
Kao, Chien-Chih; Su, Yan-Kuin; Hsieh, Yi-Ta; Lee, Yung-Chun; Cheng, Chiao-Yang; Lin, Chuing-Liang |
| 國立成功大學 |
2011-02 |
Dual Metallic Pattern Transfer Based on Metal-Film Contact Imprinting Lithography
|
Chen, Chun-Hung; Lee, Yung-Chun |
| 國立成功大學 |
2011-01 |
Direct metal contact printing lithography for patterning sub-micrometer surface structures on a sapphire substrate
|
Hsieh, Yi-Ta; Lee, Yung-Chun |
| 國立成功大學 |
2010-02 |
Direct patterning of metallic micro/nano-structures on flexible polymer substrates by roller-based contact printing and infrared heating
|
Chen, Chun-Hung; Yu, Te-Hui; Lee, Yung-Chun |
| 國立成功大學 |
2010-01 |
Roller-based laser-assisted direct imprinting for large-area and continuous nano-fabrication
|
Lee, Yung-Chun; Chiu, Cheng-Yu; Chen, Chun-Hsiang; Tsai, Jen-Hui |
| 國立成功大學 |
2010 |
Nondestructive Determination of Elastic Constants of Thin Isotropic Plates Based on Poly(vinylidene fluoride–trifluoroethylene) Copolymer Ultrasound Focusing Transducers and Lamb Wave Measurements
|
Chung, Cheng-Hsien; Lee, Yung-Chun |
| 國立成功大學 |
2009-12 |
Broadband Poly(vinylidene fluoride-trifluoroethylene) Ultrasound Focusing Transducers for Determining Elastic Constants of Coating Materials
|
Chung, Cheng-Hsien; Lee, Yung-Chun |
| 國立成功大學 |
2009-10 |
Fabrication of polyimide micro/nano-structures based on contact-transfer and mask-embedded lithography
|
Chiu, Cheng-Yu; Lee, Yung-Chun |
| 國立成功大學 |
2009-09 |
Noncontact, nondestructive elasticity evaluation of sound and demineralized human dental enamel using a laser ultrasonic surface wave dispersion technique
|
Wang, Hsiao-Chuan; Fleming, Simon; Lee, Yung-Chun; Law, Susan; Swain, Michael; Xue, Jing |
| 國立成功大學 |
2009-08-31 |
Laser ultrasonic surface wave dispersion technique for non-destructive evaluation of human dental enamel
|
Wang, Hsiao-Chuan; Fleming, Simon; Lee, Yung-Chun; Law, Sue; Swain, Michael; Xue, Jing |
| 國立成功大學 |
2009-06 |
A Remote, Non-destructive Laser Ultrasonic Material Evaluation System with Simplified Optical Fibre Interferometer Detection
|
Wang, Hsiao-Chuan; Fleming, Simon; Lee, Yung-Chun |
| 國立成功大學 |
2009-03-15 |
Laser surface treatment of screen-printed carbon nanotube emitters for enhanced field emission
|
Cheng, Chung-Wei; Chen, Chun-Ming; Lee, Yung-Chun |
| 國立成功大學 |
2009-03-10 |
Simple, all-optical, noncontact, depth-selective, narrowband surface acoustic wave measurement system for evaluating the Rayleigh velocity of small samples or areas
|
Wang, Hsiao-Chuan; Fleming, Simon; Lee, Yung-Chun |
| 國立成功大學 |
2009-01-15 |
Loss characteristics and flow rectification property of diffuser valves for micropump applications
|
Wang, Yi-Chun; Hsu, Jui-Cheng; Kuo, Ping-Chi; Lee, Yung-Chun |
