| 淡江大學 |
2019-09 |
Tool Path and Sheet Thickness Distribution of Axisymmetric Cup in Single Point Incremental Forming
|
Li, Ching-Lun;Ni, Yung-Kuan;Haw, Yang;Lu, Yuung-Hwa |
| 淡江大學 |
2018-11-23 |
The integration of Master Cam and Ls-Dyna for the Single Point Incremental Process
|
Li, Ching-Lun;Ni, Yung-Kuan;Lu, Yuung-Hwa |
| 淡江大學 |
2018-11-16 |
Tool Path and Sheet Thickness Distribution of Axisymmetric Cup in Single Point Incremental Forming
|
Li, Ching-Lun;Ni, Yung-Kuan;Yang, Hao;Lu, Yuung-Hwa |
| 淡江大學 |
2014-10 |
Application of Taguchi Method to the Optimal Parameters of Injection Molding for the Plastic Components of the Braille Display Cell
|
YEH, Fung-Huei; LI, Ching-Lun; CHEN, Bing-Ming |
| 淡江大學 |
2012-03 |
Application of Adaptive Network Fuzzy Inference System to Die Shape Optimal Design in Sheet Metal Bending Process
|
Yeh, Fung-Huei; Li, Ching-Lun; Tsay, Kun-Nan |
| 淡江大學 |
2012-01 |
An Analysis of Forming Limit for Various Arc Radii of Punch in Micro Deep Drawing of the Square Cup
|
Yeh, Fung Huei; Li, Ching Lun; Tsay, Kun Nan |
| 淡江大學 |
2012 |
Application of Adaptive Network Fuzzy Inference System to Die Shape Optimal Design in Sheet Metal Bending Process
|
Yeh, Fung-Huei; Li, Ching-Lun; Tsay, Kun-Nan |
| 淡江大學 |
2011-10 |
偏心管縮口製程之管端外形與厚度之研究
|
Li, Ching-Lun; Huang, Wei-Tze |
| 淡江大學 |
2011-09 |
An Analysis of Forming Limit in Micro Deep Drawing of the Square Cup for Anisotropic Foil
|
Yeh, Fung Huei; Li, Ching Lun; Tsay, Kun Nan |
| 淡江大學 |
2011-05 |
微方杯凸緣成形製程之分析
|
Li, Ching-Lun; Yeh, Fung-Huei; Li, Hong-Wei |
| 淡江大學 |
2008-05-26 |
Analysis of forming limits in metal forming processes
|
Li, Ching-Lun; Huang, Y.-M.; Tsai, Y.-W.; Li, C.-L. |
| 淡江大學 |
2008-05 |
Study of Thickness and Grain Size Effects on Material Behavior in Micro Forming
|
Yeh, Fung-Huei; Li, Ching-Lun; Lu, Yuung-Hwa |
| 淡江大學 |
2008-05 |
The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal
|
Li, Ching-Lun; Huang, You-Min; Tsai, Yi-Wei |
| 國立臺灣科技大學 |
2008 |
Analysis of forming limits in metal forming processes
|
Huang, You-Min ; Tsai, Yi-Wei ; Li, Ching-Lun |
| 國立臺灣科技大學 |
2008 |
The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal
|
Li, Ching-Lun ; Huang, You-Min ; Tsai, Yi-Wei |
| 淡江大學 |
2007-10 |
Accurate optimization of blank design in stretch flange based on a forward–inverse prediction scheme
|
葉豐輝; Yeh, Fung-huei; Wu, Ming-tsung; Li, Ching-lun |
| 淡江大學 |
2007-10 |
Analysis of Forming Limits in Metal Forming Processes
|
Li, Ching-Lun; Huang, You-Min; Tsai, Yi-Wei |
| 淡江大學 |
2007-10 |
The Analysis of Forming Limit in Re-penetration Process of the Hole-Flanging of Sheet Metal
|
Li, Ching-Lun; Huang, You-Min; Tsai, Yi-Wei |
| 淡江大學 |
2007-10 |
Study of Thickness and Grain Size Effects on Material Behavior in Micro Forming
|
Yeh, Fung-Huei; Li, Ching-Lun; Lu, Yuung-Hwa |
| 淡江大學 |
2006-04 |
Application of ANFIS for inverse prediction of hole profile in the square hole bore-expanding process
|
葉豐輝; Yeh, Fung-huei; Lu, Yuung-hwa; Li, Ching-lun; Wu, Ming-tsung |
| 淡江大學 |
2006-01 |
Application of FSQP to Inverse Estimation of the Constitutive Constants and Friction Coefficient in the Nosing Process
|
Lu,Yuung-hwa; Yeh, Fung-huei; Li, Ching-lun |
| 淡江大學 |
2005-12 |
方杯深引伸成形極限之最佳化料片之研究
|
李經綸; Li, Ching-Lun; 蔡毅瑋; Tsai, Yi-Wei; 李建輝; Li, Chien-Hui;于國光; Yu, Kuo-Kuang |
| 淡江大學 |
2005-12 |
金屬板材方孔凸緣製程之動顯函有限元素分析
|
李經綸; Li, Ching-Lun; 劉得仁; Liu, De-Ren; 林千森; Lin, Chen-Sen |
| 淡江大學 |
2005-12 |
微小圓杯引伸成形分析與料片最佳化之研究
|
葉豐輝; Yeh, Fung-Huei; 李經綸; Li, Ching-Lun; 陳世傑; Chen, Shih-Chieh |
| 淡江大學 |
2005-11 |
A Study of Optimum Blank in the Deep Drawing Process of Square Cup with Flange by Using Adaptive Network Fuzzy Inference System
|
Li, Ching-Lun; Huang, You-Min; Tsai, Yi-Wei |
| 淡江大學 |
2005-09 |
Study of using ANFIS to the prediction in the bore-expanding process
|
Lu, Yuung-hwa; Yeh, Fung-huei; 李經綸; Li, Ching-lun; Wu, Ming-tsung |
| 淡江大學 |
2003-12 |
金屬方板對角線彎曲製程之回彈分析
|
李經綸; Li, Ching-lun; 蕭銘仕; 蔡毅瑋; 蕭啟成 |
| 淡江大學 |
2003-11 |
適應性網路模糊推論系統於方杯引伸最佳化料片之研究
|
李經綸; Li, Ching-lun; 葉豐輝; Yeh, Fung-huei; 盧永華; 蔡毅瑋 |
| 淡江大學 |
2003-09-22 |
Study of ductile fracture and preform design of upsetting process using adaptive network fuzzy inference system
|
Lu, Yuung-hwa; Yeh, Fung-huei; 李經綸; Li, Ching-lun; Wu, Ming-tsung; Liu, Chun-ho |
| 淡江大學 |
2002-12 |
金屬板材半球型沖頭之孔凸緣貫穿成形分析
|
李經綸; Li, Ching-lun; 陳振德; Chen, Jen-De; 李章詠; Li, Chang-Yung |
| 淡江大學 |
2002-12 |
金屬方板對角線彎曲成形製程之分析
|
李經綸; Li, Ching-lun; 蕭銘仕; Hsiao, Ming-Shih |
| 淡江大學 |
2001-12 |
圓杯引伸成形之退化殼元素分析
|
李經綸; Li, Ching-lun; 于國光; 夏時軒 |
| 淡江大學 |
2001-12 |
金屬板材孔凸緣成形之退化殼元素分析
|
李經綸; Li, Ching-lun; 盧永華; Lu, Yuung-Hwa; 李章詠; Li, Chang-Yung |
| 淡江大學 |
2001-03-19 |
A study of the optimum blank for square cup drawing using the streamline method
|
Lu, Yuung-hwa; 李經綸; Li, Ching-lun; Lo, Sy-wei |
| 淡江大學 |
2000-12 |
金屬管件擴口成形製程之分析
|
李經綸; Li, Ching-lun; 夏時軒; Sha, Shih-Hsuan; 陳志華; Chen, Jyh-Wha |
| 淡江大學 |
1999-10 |
方杯引伸之最佳化料片研究--應用流線法
|
李經綸; Li, Ching-lun; 陳志華; 盧永華; 羅斯維 |
| 淡江大學 |
1999-05 |
An elasto-plastic finite-element analysis of the metal sheet redrawing process
|
Huang, You-min; 李經綸; Li, Ching-lun |
| 淡江大學 |
1998-11 |
Limiting drawing ratio of the cup-drawing process with stabilization matrices approach
|
Huang, You-Min; Li, Ching-Lun |
| 淡江大學 |
1998-06 |
Influence of Lubricant on Limit Drawing Ratio in Cup-Drawing Process: A Stabilization Matrices Scheme
|
黃佑民; Huang, You-min; 李經綸; Li, Ching-lun |
| 淡江大學 |
1997-01 |
Strategies for improving efficiency on axisymmetric sheet stretching process
|
Lu, Yuung-hwa; 李經綸; Li, Ching-lun; Huang, You-min |
