| 臺大學術典藏 |
2019-11-25T07:28:03Z |
On the Thermal Memory Effect Reduction of Power Amplifiers Using Pulse Modulation
|
KUAN-MING LI;Staudinger J.;Chen J.-H.;Li K.-M.;Chang C.-W.;Chen Y.-H.;Wang T.-H.; Wang T.-H.; Chen Y.-H.; Chang C.-W.; Li K.-M.; Chen J.-H.; Staudinger J.; KUAN-MING LI |
| 臺大學術典藏 |
2019-06-18T06:39:50Z |
Tool condition monitoring with current signals for a low-power spindle
|
Li K.M.;Young H.T.;Chung T.T.;Wang C.;Huang M.; Wang C.; Huang M.; Chung T.T.; Young H.T.; Li K.M. |
| 臺大學術典藏 |
2018-09-10T15:20:42Z |
Parameter optimization of micromilling brass mold inserts for microchannels with Taguchi method
|
Chen, P.-C.; Chen, Y.-C.; Pan, C.-W.; Li, K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
Optimization of micromilling microchannels on a polycarbonate substrate
|
Lee, W.-C.; Li, K.-M.; KUAN-MING LI; Pan, C.-W.; Chen, P.-C. |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
Effect of tool wear in ultrasonic vibration-assisted micro-milling
|
Li, K.-M.; Wang, S.-L.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
An experimental study of micromilling parameters to manufacture microchannels on a PMMA substrate
|
KUAN-MING LI;Li, K.-M.;Lee, W.-C.;Pan, C.-W.;Chen, P.-C.;KUAN-MING LI; Chen, P.-C.; Pan, C.-W.; Lee, W.-C.; Li, K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:45:33Z |
An improved remote sensing technique for estimating tool-chip interface temperatures in turning
|
KUAN-MING LI;Chu, W.-Y.;Wang, C.;Li, K.-M.;KUAN-MING LI; Li, K.-M.; Wang, C.; Chu, W.-Y.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:45:20Z |
Improving the dielectric breakdown field of silicon light-emitting-diode sub-mount by a hybrid nanosecond laser drilling strategy
|
Tang, C.-W.; Li, K.-M.; Yang, M.; Liao, H.-C.; Young, H.-T.; HONG-TSU YOUNG; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:21Z |
Study on minimum quantity lubrication in micro-grinding
|
KUAN-MING LI;Lin, C.-P.;Li, K.-M.;KUAN-MING LI; Li, K.-M.; Lin, C.-P.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:21Z |
Flank wear model for near dry turning under built-up edge effect
|
Li, K.-M.; Liang, S.Y.; KUAN-MING LI |
