臺灣學術機構典藏系統 (Taiwan Academic Institutional Repository, TAIR)

關於TAIR
	計畫說明

瀏覽
	典藏機構
	作者
	題名
	日期
	統計圖表
	機構即時統計
	學術趨勢

消息
	2019臺灣學術機構典藏研討會
	機構典藏系統RC7版本已發佈

著作權
	出版社及期刊政策查詢
	TAIR著作權會議記錄

相關連結
	機構典藏計畫網站
	ROAR
	OpenDOAR
	SHERPA
	OAIster
	JAIRO
	Ira
	DSPACE
	RWWR
	臺大學術典藏NTU Scholars

"liao y s"的相關文件

回到依作者瀏覽
依題名排序	依日期排序

顯示項目 201-250 / 280 (共6頁)
<< < 1 2 3 4 5 6 > >>
每頁顯示[10|25|50]項目

機構	日期	題名	作者
國立臺灣大學	2005	Study of Hole-Machining on Pyrex Wafer by Electrochemical Discharge Machining	Liao, Y. S.; Peng, W. Y.
國立臺灣大學	2005	Fabrication of High Aspect Ratio Microstructure Array by Micro Reverse Wire-EDM	Liao, Y. S.; Chen, S. T.; Lin, C. S.
國立臺灣大學	2005	Ablation of Transparent Materials Using Excimer Lasers for Photonic Applications	Chen, Y. T.; Naessew, K.; Baets, R.; Liao, Y. S.; Tseng, A. A.
國立臺灣大學	2005	Surface Morphology and Sub-surface Damaged Layer of Various Glasses Machined by 193nm ArF Excimer Laser	Liao, Y. S.; Chen, Y. T.; Chao, C. L.; Liu, Y. M.
臺大學術典藏	2005	Computational Study of the Effect of Finger Width and Aspect Ratios for the Electrostatic Levitating Force of MEMS Combdrive	Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS
臺大學術典藏	2005	Low-leakage in0.53Ga0.47As p-i-n photodetector fabricated on GaAs substrate with linearly graded metamorphic in xGa1-xP buffer	Kuo, H.-C.; Liao, Y.-S.; Lin, G.-R.; GONG-RU LIN; Lin, C.-K.
臺大學術典藏	2005	Surface morphology and sub-surface damaged layer of various glasses machined by 193 nm ArF excimer laser	YUNN-SHIUAN LIAO; Chao, C.-L.; Liu, Y.-M.; Chen, Y.-T.; Liao, Y.-S.
國立臺灣大學	2004	Efficaciously Modeling Exterior Electrostatic Problems with Singularity for Electron Devices	Liao, Y.S.; Chyuan, S,W.; Chen, J.T.
國立臺灣大學	2004	Study of Specific Discharge Energy in WEDM and its Application	Liao, Y.S.; Yu, Y.P.
國立臺灣大學	2004	A Study to Achieve a Fine Surface Finish in Wire-EDM	Liao, Y.S.; Huang, J.T.; Chen, Y.H.
國立臺灣大學	2004	Study of Electrochemical Discharge Machining Technology for Slicing Non-conductive Brittle Materials	Peng, W.Y.; Liao, Y.S.
國立臺灣大學	2004	A Study of the Characteristics of the Diamond Dresser in the CMP process	Liao, Y.S.; Hong, P.W.; Yang, C.T.
國立臺灣大學	2004	Slicing Strategies to Obtain Accuracy of Feature Relation in Rapidly Prototyped Parts	Chiu, Y.Y.; Liao, Y.S.; Lee, S.C.
國立臺灣大學	2004	An alternatively efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEMS combdrive	Liao, Y.S.; Chyuan, S.W.; Chen, J.T.
國立臺灣大學	2004	Computational Study of Variations in Gap Size for the Electrostatic Levitating Force of MEMS Device Using Dual BEM	Chyuan, S.W.; Liao, Y.S.; Chen, J.T.
國立臺灣大學	2004	The Energy Aspect of Material Property in WEDM and its Application	Liao, Y.S.; Yu, Y.P.
國立臺灣大學	2004	Numerical studies of variations in the gap and finger width ratio and travelled distance for the driving force of a radio-frequency microelectromechanical system device using the dual boundary element method	Liao, Y.S.; Chyuan, S,W.; Chen, J.T.
臺大學術典藏	2004	Efficaciously Modeling Exterior Electrostatic Problems with Singularity for Electron Devices	Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS
臺大學術典藏	2004	Study of Specific Discharge Energy in WEDM and its Application	Liao, Y.S.; Yu, Y.P.; Liao, Y.S.; Yu, Y.P.; LiaoYS
臺大學術典藏	2004	A Study to Achieve a Fine Surface Finish in Wire-EDM	Liao, Y.S.; Huang, J.T.; Chen, Y.H.; Liao, Y.S.; Huang, J.T.; Chen, Y.H.; LiaoYS
臺大學術典藏	2004	An alternatively efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEMS combdrive	LiaoYS; Chen, J.T.; Chyuan, S.W.; Liao, Y.S.; Liao, Y.S.; Chyuan, S.W.; Chen, J.T.
臺大學術典藏	2004	The Energy Aspect of Material Property in WEDM and its Application	Yu, Y.P.; LiaoYS; Liao, Y.S.; Liao, Y.S.; Yu, Y.P.
臺大學術典藏	2004	Numerical studies of variations in the gap and finger width ratio and travelled distance for the driving force of a radio-frequency microelectromechanical system device using the dual boundary element method	LiaoYS; Chen, J.T.; Chyuan, S,W.; Liao, Y.S.; Liao, Y.S.; Chyuan, S,W.; Chen, J.T.
臺大學術典藏	2004	Study of electrochemical discharge machining technology for slicing non-conductive brittle materials	YUNN-SHIUAN LIAO; Liao, Y.S.; Peng, W.Y.
國立臺灣大學	2003	Study on wear mechanisms in drilling of Inconel 718 superalloy	Liao, Y.S.; Chen, Y.C.
國立臺灣大學	2003	Self-tuning fuzzy control with a grey prediction for wire rupture prevention in WEDM	Lee, W.M.; Liao, Y.S.
國立臺灣大學	2003	A New Approach of Online Waste Removal Process for Laminated Object Manufacturing (LOM)	Liao, Y.S.; Chiu, L.C.; Chiu, Y.Y.
國立臺灣大學	2003	An Innovative and Efficient Method-DBEM for the Electrostatic Problems with Singularity Arising from Degenerate Boundary	Chyuan, S.W.; Liao, Y.S.; Chen, J.T.
國立臺灣大學	2003	Laser path planning of burn-out rule for LOM process	Chiu, Y.Y.; Liao, Y.S.
國立臺灣大學	2003	Optimization of Machining Parameters of Wire-EDM Based on Grey Relational and Statistical Analyses	Huang, J.T.; Liao, Y.S.
國立臺灣大學	2003	Study of Electrical Discharge Machining Technology for Slicing Silicon Ingots	Peng, W.Y.; Liao, Y.S.
國立臺灣大學	2003	Automatic fabrication for bridged laminated object manufacturing (LOM) process	Chiu, Y.Y.; Liao, Y.S.; Hou, C.C.
臺大學術典藏	2003	Study on wear mechanisms in drilling of Inconel 718 superalloy	Liao, Y.S.; Chen, Y.C.; Liao, Y.S.; Chen, Y.C.; LiaoYS
臺大學術典藏	2003	Self-tuning fuzzy control with a grey prediction for wire rupture prevention in WEDM	Lee, W.M.; Liao, Y.S.; YUNN-SHIUAN LIAO
臺大學術典藏	2003	A new approach of online waste removal process for laminated object manufacturing (LOM)	YUNN-SHIUAN LIAO; Chiu, Y.Y.; Chiu, L.C.; Liao, Y.S.
國立臺灣大學	2002	A Neural Network Approach for the On-line Estimation of Workpiece Height in WEDM	Liao, Y.S.; Yan, M.T.; Chang, C.C.
臺大學術典藏	2002	A Neural Network Approach for the On-line Estimation of Workpiece Height in WEDM	Liao, Y.S.; Yan, M.T.; Chang, C.C.; Liao, Y.S.; Yan, M.T.; Chang, C.C.; LiaoYS
臺大學術典藏	2002	A neural network approach for the on-line estimation of workpiece height in WEDM	CHIEN-CHENG CHANG; Liao, Y. S.; Yang, M. T.; Chang, C. C.
國立臺灣大學	2001	On-line Estimation of Workpiece Height by Using Neural Networks and Hierarchical Adaptive Control of WEDM	Yan, M.T.; Liao, Y.S.; Chang, C.C.
國立臺灣大學	2001	Neural Based WEDM Machining-parameters Optimization by GA and GRA	Lee, W. M.; Liao, Y.S.; Chang, S.H.
國立臺灣大學	2001	Adaptive crosshatch approach for the laminated object manufacturing (LOM) process	Liao, Y.S.; Chiu, Y.Y.
國立臺灣大學	2001	A New Slicing Procedure for Rapid Prototyping Systems	Liao, Y.S.; Chiu, Y.Y.
臺大學術典藏	2001	Adaptive crosshatch approach for the laminated object manufacturing (LOM) process	Liao, Y.S.; Chiu, Y.Y.; Liao, Y.S.; Chiu, Y.Y.; LiaoYS
臺大學術典藏	2001	A New Slicing Procedure for Rapid Prototyping Systems	Liao, Y.S.; Chiu, Y.Y.; Liao, Y.S.; Chiu, Y.Y.; LiaoYS
國立臺灣大學	2000	A thermal model of the wet grinding process	Liao, Y.S.; Luo, S.Y.; Yang, T.H.
國立臺灣大學	2000	A wire-EDM maintenance and fault-diagnosis expert system integrated with an artificial neural network	Huang, J.T.; Liao, Y.S.
國立臺灣大學	2000	Design of a Fuzzy Controller for the Adaptive control of WEDM Process	Liao, Y.S.; Woo, J.C.
臺大學術典藏	2000	A thermal model of the wet grinding process	LiaoYS; Yang, T.H.; Luo, S.Y.; Liao, Y.S.; Liao, Y.S.; Luo, S.Y.; Yang, T.H.
國立臺灣大學	1999	Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools	Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y.
國立臺灣大學	1999	Determination of Finish-Cutting Operation Number and Machining Parameters Setting in Wire Electrical Discharge Machining	Huang, J.T.; Liao, Y.S.; Hsue, W.J.

顯示項目 201-250 / 280 (共6頁)
<< < 1 2 3 4 5 6 > >>
每頁顯示[10|25|50]項目

	English \| 正體中文 \| 简体中文 \| 總筆數 :0
	造訪人次 : 51829445 線上人數 : 750 教育部委託研究計畫計畫執行:國立臺灣大學圖書館