| 淡江大學 |
2024-09-27 |
Characterizing sliding wear behavior of A1100/AlFe (p) composites produced via repeated fold-forging and annealing
|
Tseng, Yu-fong;Liu, Chao-hwa;Lin, Ching-bin |
| 淡江大學 |
2023-03-17 |
Brownian motion of poly(divinylbenzene) nanoparticles in water
|
Lin, Ching-Bin;Lee, Chia-Wei;Ouyang, Hao;Yang, Fuqian;Lee, Sanboh |
| 淡江大學 |
2023-01-27 |
Integrating a Fused Deposition Modeling 3D Printing Design with Computer Numerical Control Milling Machines
|
Lin, Ching-Bin;Huang, Pin-Jie;Chen, Guan-Chen |
| 淡江大學 |
2022-11-15 |
Fabrication and Characterization of Visible-Light-Driven Plasmonic Photocatalyst Ag/AgCl/TiO2 Porous Structure
|
Lee, Po-Ching;Yang, Zheng-Rong;Kuo, Chun-Yu;Shin, Chung-Hao;Lin, Ching-Bin |
| 淡江大學 |
2022-11-15 |
Fabrication and Characterization of Visible-Light-Driven Plasmonic Photocatalyst Ag/AgCl/TiO2 Porous Structure
|
Lee, Po-Ching;Yang, Zheng-Rong;Kuo, Chun-Yu;Shin, Chung-Hao;Lin, Ching-Bin |
| 淡江大學 |
2021-08-14 |
Photonic Nanojet Modulation Achieved by a Spider-Silk-Based Metal–Dielectric Dome Microlens
|
Lin, Ching-Bin;Lin, Yu-Hsiang;Chen, Wei-Yu;Liu, Cheng-Yang |
| 淡江大學 |
2021-06 |
Contact force analysis on two-fingered robot grasping
|
Chen, Jiun-Ru;Chen, Wei-En;Liu, Chao-Hwa;Wang, Yin-Tien;Lin, Ching-Bin;Chen, Guan-Chen |
| 淡江大學 |
2021-05-25 |
AgCl-based selective laser melting photocatalytic module for degradation of azo dye and E. coli
|
Liu, Chao-Hwa;Huang, Cheng-Yu;Lee, Po-Ching;Chen, Guan-Chen;Yang, Zheng-Rong;Lin, Ching-Bin |
| 淡江大學 |
2021-05-25 |
AgCl-based selective laser melting photocatalytic module for degradation of azo dye and E. coli
|
Liu, Chao-Hwa;Huang, Cheng-Yu;Lee, Po-Ching;Chen, Guan-Chen;Yang, Zheng-Rong;Lin, Ching-Bin |
| 淡江大學 |
2020-12-21 |
Spreading of water droplets on cellulose-based papers: effect of back-surface coating
|
Lin, Ching-Bin;Chang, Han-Sen;Zhang, Yulin;Yang, Fuqian;Lee, Sanboh |
| 淡江大學 |
2020-10-26 |
Fabrication of large-area linear and nonlinear surface ripple structures on polystyrene films
|
Liu, Chao-Hwa;Lin, Chia-Hong;Lin, Ching-Bin |
| 淡江大學 |
2015-03-08 |
A Novel Method for Preparation of Silver Chloride Thin
|
You, Chang-Ching;Lin, Ching-Bin;Liang, Yang-Min;Li, Chi-Wang;Hui-Chung |
| 淡江大學 |
2014-07 |
Precipitated Film And Fabricating Method Thereof
|
Lin, Ching-Bin;You, Chang-Ching;Hsueh, Hui-Chung |
| 淡江大學 |
2014-07 |
Cleaner Structure For Toilet Tank
|
Lin, Ching-Bin;Wang, Chien-Chia;Yuan, Chia-Ying |
| 淡江大學 |
2008-06-23 |
Optical film having prismatic faces directly formed with micro-lenses thereon
|
Lin, Ching-Bin |
| 淡江大學 |
2008-03 |
The Effect of Crack Orientation on Ethanol-Induced Crack Healing in Poly (Methyl Methacrylate)
|
何金新; Ho, Jin-shin; 林清彬; Lin, Ching-bin; Chang, Zue-chin |
| 淡江大學 |
2007-12 |
The Effect of Crack Orientation on Methanol-Induced Crack Healing in Poly(Methyl Methacrylate)
|
何金新; Ho, Jin-shin; 林清彬; Lin, Ching-bin; Chang, Zue-chin |
| 淡江大學 |
2007-07-19 |
Fabrication method of nanoimprinting mold core
|
林清彬; Lin, Ching-bin; Cheng, Pao-yu; Lin, Hung-yi |
| 淡江大學 |
2006/09/01 |
Optical film having prismatic faces directly formed with micro-lenses thereon
|
Lin, Ching-Bin |
| 淡江大學 |
2006/08/04 |
Optical film having multi-story and multi-peak prisms
|
Lin, Ching-Bin |
| 淡江大學 |
2006/06/19 |
Synergetically enhanced multiple-layer optical film and process thereof
|
Lin, Ching-Bin |
| 淡江大學 |
2006/06/12 |
Multiple-layer optical film having light concentrating and diffusing functions
|
Lin, Ching-Bin |
| 淡江大學 |
2006/06/05 |
Multiple-layer optical film intermediated with corrugated pattern layer and process thereof
|
Lin, Ching-Bin |
| 淡江大學 |
2006/03/03 |
Optical film having multi-story prisms and manufacturing process thereof
|
Lin, Ching-Bin |
| 淡江大學 |
2006/02/22 |
Synergetically enhanced optical film and process for making same
|
Lin, Ching-Bin |
| 淡江大學 |
2006/02/21 |
Method for forming structured film as molded by tape die
|
Lin, Ching-Bin |
| 淡江大學 |
2006-03-23 |
Nano water paint having nano particles surfaced with self-assembly monolayers
|
Lin, Ching-Bin;Yeh, Shaing-Hai;Liu, Wen-Chin;Lee, Hung-Chou |
| 淡江大學 |
2005/01/14 |
Fabrication Method of Nanoimprint Mold Core
|
Lin, Ching-Bin;Cheng, Pao-Yu;Lin, Hung-Yi |
| 淡江大學 |
2001/01/29 |
Guidably-recirculated heat dissipating means for cooling central processing unit
|
Lin, Ching-Bin |
| 淡江大學 |
2001-04 |
Microfabrication Process for Making Microstructures as Geometrically Mimiaturized from Three-Dimensional Orientations
|
Lin, Ching-bin; 康尚文; Kang, Shung-wen; Wei, Mau-kuo |
| 淡江大學 |
2000/11/24 |
Self-recirculated heat dissipating means for cooling central processing unit
|
Lin, Ching-Bin |
| 淡江大學 |
2000/06/05 |
Process and apparatus for plating copper on particulate graphite
|
Lin, Ching-Bin;Lin, Jen-Fin |
| 淡江大學 |
2000-05-03 |
Mikroherstellungsprozess zur Herstellung von geometrisch miniaturisierten Mikrostrukturen aus dreidimensionalen Gebilden
|
Kang, Shung-Wen;Lin, Ching-Bin;Wei, Mau-Kuo |
| 淡江大學 |
1999/11/02 |
Microfabrication process for making microstructures as geometrically miniaturized from three-dimensional orientations
|
Lin, Ching-Bin |
| 淡江大學 |
1999-12-07 |
Water-penetrable drip irrigation pipe
|
林清彬; Lin, Ching-bin |
| 淡江大學 |
1999-10-20 |
Manufacture method of microstructure with high aspect ratio
|
Lin, Ching-Bin |
| 淡江大學 |
1998/07/15 |
Water-penetrable drip irrigation pipe
|
Lin, Ching-Bin |
| 淡江大學 |
1998-05-05 |
Process and apparatus for manufacturing aluminum laminally filled plastic pellets for shielding electromagnetic interference
|
Chuang, Tung-han; 林清彬; Lin, Ching-bin; Tsai, Teng-chun; Chang, Jiin-chyuan |
| 淡江大學 |
1997-08-07 |
Verfahren und vorrichtung zur herstellung von pellets aus metallisiertem kunststoff fur die formverarbeitung zum abschirmen von elektromagnetischer beeinflussung
|
林清彬; Lin, Ching-bin; Chuang, Tung-han |
| 淡江大學 |
1996/11/01 |
Process and apparatus for manufacturing aluminum laminally filled plastic pellets for shielding electromagnetic interference
|
Chuang, Tung-Han;Lin, Ching-Bin;Tsai, Teng-Chun;Chang, Jiin-Chyuan |
| 淡江大學 |
1996-12 |
溫度對Al-4.2Wt%Cu/0.3 μmA12o3複合材料機械性質之影響
|
張子欽; Chang, Zue-ching; 鄭文達; Jen, Wen-dre; 林清彬; Lin, Ching-bin |
| 淡江大學 |
1996-07-02 |
Process for making metallized plastic molding pellets for shielding electromagnetic interface
|
林清彬; Lin, Ching-bin; Chuang, Tung-han |
| 淡江大學 |
1995/04/28 |
Process for making metallized plastic molding pellets for shielding electromagnetic interference
|
Lin, Ching-Bin;Chuang, Tung-Han |
| 淡江大學 |
1994/10/11 |
Process for making metal-matrix composites mixed with reinforcing materials by forced drafting
|
Lin, Ching-Bin |
| 中原大學 |
1994 |
運算轉導放大器之設計與應用
|
林慶賓; Lin,Ching Bin |
| 淡江大學 |
1993/07/28 |
Process for making metal-matrix composites reinforced by ultrafine reinforcing materials products thereof
|
Lin, Ching-Bin |
| 淡江大學 |
1993/07/27 |
Apparatus for making metal-matrix composites reinforced by ultrafine reinforcing materials
|
Lin, Ching-Bin |
