| 淡江大學 |
2025-06-24 |
Standardized Morphological Modeling and Simulation-Based Validation of a Novel Tibiotalar Fusion Implant. Bioengineering, 2025, 12(7), 705.
|
Huang, Chao-Wei;Wang, Yu-Tzu;Chen, Chi-An;Lin, Chun-Li |
| 淡江大學 |
2023-03-25 |
Feasibility evaluation of a new lattice for porous surface design in additive manufacturing medical implants under interfacial tensile bonded testing
|
Wang, Yu-Tzu;Chang, Chun-Ming;Liu, Pei-Hsin;Lin, Chun-Li |
| 淡江大學 |
2022-07-10 |
Development of the patient-specific implant with lightweight optimized structure for mandibular angle/ramus reconstruction
|
Wang, Yu-Tzu;Tsai, Wei-Heng;Li, Chia-Hsuan;Chen, Kun-Chun;Lin, Chun-Li |
| 淡江大學 |
2021-12-10 |
Design Criteria for Patient-specific Mandibular Continuity Defect Reconstructed Implant with Lightweight Structure using Weighted Topology Optimization and Validated with Biomechanical Fatigue Testing
|
Lin, Chun-Li;Wang, Yu-Tzu;Chang, Chun-Ming;Wu, Cheng-Hsien;Tsai, Wei-Heng |
| 淡江大學 |
2021-12-02 |
Development of the patient-specific implant with optimized and lightweight structure for mandibluar Symphyseal and parasymphyseal region reconstruction
|
WANG, Yu-Tzu;TSAI, Wei-Heng;LI, Chia-Hsuan;CHEN, Kun-Chun;LI, Cun-Bin;LIN, Chun-Li |
| 國立成功大學 |
2021-06-09 |
鋼筋混凝土柱火害後之耐震行為曲線研究
|
林峻立; Lin, Chun-Li |
| 淡江大學 |
2019-04-04 |
Biomechanical Analysis to Verify the Buttress Theory When Using the Anatomical Thin Titanium Mesh Plate for Zygomaticomaxillary Complex Bone Fracture
|
Wang, Yu-Tzu;Wang, Po-Fang;Chen, Chien-Tzung;Chen, Chih-Hao;Lin, Chun-Li |
| 淡江大學 |
2018-09 |
A novel anatomical thin titanium mesh plate with patient-matched bending technique for orbital floor reconstruction
|
Chen, Chih-Hao;Chen, Chien-Tzung;Wang, Po-Fang;Wang, Yu-Tzu;Hsu, Pin-Hsin;Lin, Chun-Li |
| 淡江大學 |
2018-05-20 |
Anatomical Thin Titanium Mesh Plate Structural Optimization for Zygomatic-Maxillary Complex Fracture under Fatigue Testing.
|
Wang, Yu-Tzu;Huang, Shao-Fu;Fang, Yu-Ting;Huang, Shou-Chieh;Cheng, Hwei-Fang;Chen, Chih-Hao;Wang, Po-Fang;Lin, Chun-Li |
| 淡江大學 |
2018-04 |
Development of a novel anatomical thin titanium mesh plate with reduction guidance and fixation function for Asian zygomatic-orbitomaxillary complex fracture
|
Wang, Yu-Tzu;Chen, Chih-Hao;Wang, Po-Fang;Lin, Chun-Li |
| 國立高雄第一科技大學 |
2017.06 |
In Vitro Laser Treatment Platform Construction with Dental Implant Thread Surface on Bacterial Adhesion for Peri-Implantitis
|
Hsien-Nan?Kuo;Mei, Hsiang-I;Liu, Tung-Kuan;Liu, Tse-Ying;Lo, Lun-Jou;Lin, Chun-Li |
| 淡江大學 |
2017-12-27 |
Customized surgical template fabrication under biomechanical consideration by integrating CBCT image, CAD system and finite element analysis
|
Yu, Jian-Hong;Wang, Yu-Tzu;Lin, Chun-Li |
| 淡江大學 |
2017-02-09 |
Developing Customized Dental Miniscrew Surgical Template from Thermoplastic Polymer Material Using Image Superimposition, CAD System, and 3D Printing
|
Wang, Yu-Tzu;Yu, Jian-Hong;Lo, Lun-Jou;Hsu, Pin-Hsin;Lin, Chun-Li |
| 國立臺北護理健康大學 |
2016 |
護理人員對呼吸器依賴患者長期照護知識之在職教育需求評估
|
林純麗; Lin, Chun-Li |
| 國立成功大學 |
2015-10 |
Provably secure extended chaotic map-based three-party key agreement protocols using password authentication
|
Lee, Tian-Fu; Lin, Ching-Ying; Lin, Chun-Li; Hwang, Tzonelih |
| 國立交通大學 |
2014-12-12T02:44:39Z |
雙對稱開口薄壁Timoshenko梁之非線性動態分析
|
林群禮; Lin, Chun-Li; 蕭國模; Hsiao, Kuo-Mo |
| 國立成功大學 |
2010-10-28 |
4th International Symposium & Workshop on VIMS
|
Chao, YS; Masao Tanaka; Su, Fong- Chin; Nozomu Inoue; Isao Ohnishi; Neriman Ozada; Liu, Qin; Yoon Hyuk Kim; Lin, Jinn; Hsu, Wen-Wei; Lin, Chun-Li; Yang, King H.; Yang, Saiwei; Huang, Heng-Li; Toyohiko Hayashi; Lin, Hwai-Ting; Steve Burke |
| 國立成功大學 |
2007-05 |
Proxy-protected signature secure against the undelegated proxy signature attack
|
Liu, Yu-Chuan; Wen, Hsiang-An; Lin, Chun-Li; Hwang, Tzonelih |
| 國立成功大學 |
2006-07 |
Stress analysis of implant-supported partial prostheses in anisotropic mandibular bone: in-line versus offset placements of implants
|
Huang, Heng-Li; Lin, Chun-Li; Ko, Ching-Chang; Chang, Chih-Han; Hsu, Jui-Ting; Huang, Jehn-Shyun |
| 國立成功大學 |
2006-03 |
Provably secure authenticated key exchange protocols for low power computing clients
|
Wen, Hsiang-An; Lin, Chun-Li; Hwang, Tzonelih |
| 國立成功大學 |
2004-11 |
The effect of retainer thickness on posterior resin-banded prostheses: a finite element study
|
Lin, Thy-Sheng; Lin, Chun-Li; Wang, Chau-Hsiang; Chang, Chih-Han; Chang, Y. H. |
| 國立成功大學 |
2004-11 |
Provably secure three-party password-authenticated key exchange
|
Lin, Chun-Li; Wen, Hsiang-An; Hwang, Tzonelih; Sun, Hung-Min |
| 國立成功大學 |
2004-10 |
Enhanced three-party encrypted key exchange without server public keys
|
Lee, Tian-Fu; Hwang, Tzonelih; Lin, Chun-Li |
| 國立成功大學 |
2003-11 |
Numerical investigation of retainer thickness affecting retention in posterior resin-bonded prosthesis using the finite element method
|
Lin, Chun-Li; Lin, Ting-Sheng; Hsu, Kuang-Wei; Wu, Chun-Hsien; Chang, Chih-Han |
| 國立成功大學 |
2003-09 |
Integration of CT, CAD system and finite element method to investigate interfacial stresses of resin-bonded prosthesis
|
Lin, Chun-Li; Lee, Huey-Er; Wang, Chau-Hsiang; Chang, Keng-Hua |
| 國立成功大學 |
2003-03 |
Security of Park-Lim key agreement schemes for VSAT satellite communications
|
Yi, Xun; Siew, Chee-Kheong; Sun, Hung-Min; Yeh, Her-Tyan; Lin, Chun-Li; Hwang, Tzonelih |
| 國立成功大學 |
2003-01-09 |
可證明安全的通行碼驗證金鑰交換
|
林峻立; Lin, Chun-Li |
| 國立成功大學 |
2003 |
A password authentication scheme with secure password updating
|
Lin, Chun-Li; Hwang, Tzonelih |
| 國立成功大學 |
2002-09 |
Stresses at the cervical lesion of maxillary premolar - a finite element investigation
|
Lee, Huey-Er; Lin, Chun-Li; Wang, Chau-Hsiang; Cheng, C. H.; Chang, Chih-Han |
| 國立成功大學 |
2002-03 |
Biomechanical investigation of posterior resin-bonded prostheses.
|
Lin, Thy-Sheng; Chang, Chih-Han; Lin, Chun-Li |
| 國立成功大學 |
2002-03 |
Stress analyses of 3D dental bridge models with various implant supported designs
|
Chang, Chih-Han; Huang, Heng-Li; Lin, Chun-Li; Ko, Ching-Chang |
| 國立成功大學 |
2002-03 |
Stress analysis around a dental implant for simulated progressive bone loss
|
Huang, Heng-Li; Chang, Chih-Han; Ko, Ching-Chang; Lin, Chun-Li; Huang, Jehn-Shyun |
| 國立成功大學 |
2002-03 |
Effects of framework designs with thermal analyses of resin-bonded prostheses.
|
Chuang, C. H.; Lin, Chun-Li; Lin, Thy-Sheng; Chang, Y. H.; Lee, Ming-Yang |
| 國立成功大學 |
2001-12 |
Three-party encrypted key exchange without server public-keys
|
Lin, Chun-Li; Sun, Hung-Min; Steiner, Michael; Hwang, Tzonelih |
| 國立成功大學 |
2001-09 |
Attacks and solutions on strong-password authentication
|
Lin, Chun-Li; Sun, Hung-Min; Hwang, Tzonelih |
| 國立成功大學 |
2001-06 |
Numerical investigation of the factors affecting interfacial stresses in an MOD restored tooth by auto-meshed finite element method
|
Lin, Chun-Li; Chang, Chih-Han; Wang, Chau-Hsiang; Ko, Ching-Chang; Lee, Huey-Er |
| 國立成功大學 |
2001-06 |
Multifactorial analysis of an MOD restored human premolar using auto-mesh finite element approach
|
Lin, Chun-Li; Chang, Chih-Han; Ko, Ching-Chang |
| 國立成功大學 |
2000-02 |
Privacy and non-repudiation on Pay-TV systems
|
Lee, Nam-Yih; Chang, Chi-Chao; Lin, Chun-Li; Hwang, Tzonelih |
| 國立成功大學 |
1999-06 |
Automatic finite element mesh generation for maxillary second premolar
|
Lin, Chun-Li; Chang, Chih-Han; Cheng, Chia-Shin; Wang, Chau-Hsiang; Lee, Huey-Er |
