| 國立成功大學 |
2013-03 |
Effects of pre-strain applied to a poly(ethylene terephthalate) substrate before TiO2 film deposition on the contact angle of the substrate and the morphology of the specimen
|
Li, Tse-Chang; Chen, Kuan-Ting; Chung, Chung-Jen; Song, Yen-Fang; Wang, Chun-Chieh; Lin, Jen-Fin |
| 國立成功大學 |
2012-10 |
Effects of Prestrain Applied to a Polyethylene Terephthalate Substrate Before the Coating of Al-Doped ZnO Film on Film Quality, Electrical Properties, and Pop-In Behavior During Nanoindentation
|
Li, Tse-Chang; Han, Chang-Fu; Wu, Bo-Hsiung; Hsieh, Po-Tsung; Lin, Jen-Fin |
| 國立成功大學 |
2012-08-01 |
Atomic-scale simulations of material behaviors and tribology properties for FCC and BCC metal films
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2012-08 |
Stress-strain analysis for evaluating the effect of the orientation of dentin tubules on their mechanical properties and deformation behavior
|
Han, Chang-Fu; Wu, Bo-Hsiung; Chung, Chung-Jen; Chuang, Shu-Fen; Li, Wang-Long; Lin, Jen-Fin |
| 國立成功大學 |
2012-07 |
Fractal Theory Applied to Evaluate the Tribological Performances of Two Greases Demonstrated in Four-Ball Tests
|
Liou, Jeng Luen; Sun, Yi Hsing; Lin, Jen Fin; Chiu, Yueh-Ling; Hulang, Yih-Chyun |
| 國立成功大學 |
2012-06-01 |
Effects of deposition conditions of the Al film in Al/glass specimens and annealing conditions on internal stresses and hillock formations
|
Kao, Ming Tsung; Lin, Jen Fin |
| 國立成功大學 |
2012-05-15 |
Effects of tip-substrate gap, deposition temperature, holding time, and pull-off velocity on dip-pen lithography investigated using molecular dynamics simulation
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2012 |
Atomic-scale simulations of material behaviors and tribology properties for FCC and BCC metal films
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2011-09-01 |
Effects of pre-strain applied at a polyethylene terephthalate substrate before the coating of TiO(2) film on the coating film quality and optical performance
|
Li, Tse-Chang; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2011-09 |
Effects of pre-strain applied at a polyethylene terephthalate substrate before the coating of Al-doped ZnO film on film quality and optical and electrical properties
|
Li, Tse-Chang; Hsieh, Po-Tsung; Lin, Jen-Fin |
| 國立成功大學 |
2011-09 |
Effects of Al film thickness and annealing temperature on the aluminum-induced crystallization of amorphous silicon and carrier mobility
|
Peng, Cheng-Chang; Chung, Chen-Kuei; Lin, Jen-Fin |
| 國立成功大學 |
2011-05-31 |
Deter mining buckling strain energy release rate through indentation-induced delamination
|
Wei, Pal Jen; Bin Chio, Sheng; Liang, Wen Long; Lin, Jen Fin |
| 國立成功大學 |
2011-05 |
The Interfacial Transition of the C/Si Composite Film and Si Substrate Evaluated to Predict the Pop-In Behavior in Nanoindentation
|
Han, Chang-Fu; Huang, Chao-Yu; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2011-01-12 |
Analyses and experimental confirmation of removal performance of silicon oxide film in the chemical-mechanical polishing (CMP) process with pattern geometry of concentric groove pads
|
Wei, Chin-Chung; Horng, Jeng-Haur; Lee, An-Chen; Lin, Jen-Fin |
| 國立成功大學 |
2011-01 |
Investigation of enhanced viscosity of squeezed liquids affected by solid-liquid absorptiveness via nanoindentation technique
|
Wei, Pal Jen; Shen, Yen Xing; Lin, Ting Fu; Lin, Jen Fin |
| 國立成功大學 |
2011-01 |
An Investigation of the Effects of Polymethylmethacrylate Orientation and Antistiction Layer on the Nanoimprint Process Using Molecular Dynamics
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2011 |
Effect of chain length of self-assembled monolayers in dip-pen nanolithography using molecular dynamics simulations
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2010-02-04 |
A microcontact model developed for sphere- and cylinder-based fractal bodies in contact with a rigid flat surface
|
Liou, Jeng-Luen; Tsai, Chi-Ming; Lin, Jen-Fin |
| 國立成功大學 |
2010-01-04 |
A modified fractal microcontact model developed for asperity heights with variable morphology parameters
|
Liou, Jeng Luen; Lin, Jen Fin |
| 國立成功大學 |
2010-01 |
Nanotribological behavior of diamond surfaces using molecular dynamics with fractal theory and experiments
|
Lin, Jen-Fin; Fang, Te-Hua; Wu, Cheng-Da; Houng, Ko-Han |
| 國立成功大學 |
2009-12 |
Analysis of a ball screw with a preload and lubrication
|
Wei, Chin Chung; Lin, Jen Fin; Horng, Jeng-Haur |
| 國立成功大學 |
2009-12 |
Reflectivity of an etched silicon surface with pyramids: II. Experimental results from different etching conditions
|
Wu, Chen Jian; Wei, Pal-Jen; Lin, Jen Fin |
| 國立成功大學 |
2009-11 |
The reflectivity of an etched silicon surface with pyramids: I. Theoretical model and its predictions
|
Wu, Chen Jian; Wei, Pal Jen; Lin, Jen Fin |
| 國立成功大學 |
2009-10-25 |
Plasma immersion ion implantation induced improvements of mechanical properties, wear resistance, and adhesion of diamond-like carbon films deposited on tool steel
|
Chen, Kuan-Wei; Lin, Jen-Fin; Tsai, Wen-Fa; Ai, Chi-Fong |
| 國立成功大學 |
2009-10-15 |
The nanoindentation applied to predict the interface delamination for the C/amorphous Si composite film
|
Han, Chang-Fu; Huang, Chao-Yu; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2009-08 |
Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立成功大學 |
2009-07-01 |
The study of adhesion and nanomechanical properties of DLC films deposited on tool steels
|
Chen, Kuan-Wei; Lin, Jen-Fin |
| 國立成功大學 |
2009-06-16 |
Characteristics of Water Strider Legs in Hydrodynamic Situations
|
Wei, Pal Jen; Shen, Yan Xing; Lin, Jen-Fin |
| 國立成功大學 |
2009-05 |
A Model Developed for the Adhesion Forces Formed between an Atomic Force Microscopy Tip and a Rough Surface under Different Humidity Levels
|
Chen, Sheng Chao; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-05 |
Multiscale Particle Dynamics on Nanocontact and Sliding Friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua; Lin, Hung-Yi; Chang, Shuo-Hung |
| 國立成功大學 |
2009-05 |
Modified method developed for contact-induced adhesion in indentation
|
Shen, Yan Xing; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-03 |
A Microcontact Model Developed for Asperity Heights with a Variable Profile Fractal Dimension, a Surface Fractal Dimension, Topothesy, and Non-Gaussian Distribution
|
Lion, J. L.; Lin, Jen-Fin |
| 國立成功大學 |
2009-03 |
Modified method for continuous stiffness measurement
|
Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-02-03 |
Adhesion Forces and Contact Angles of Water Strider Legs
|
Wei, Pal Jen; Chen, Sheng Chao; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-15 |
Determination of the strain energy release rate for C/a-Si composite film produced in nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Huang, Chao-Yu; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-14 |
A new method for determining the strain energy release rate of an interface via force-depth data of nanoindentation tests
|
Wei, Pal Jen; Liang, Wen Long; Ai, Chi Fong; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-05 |
Analysis based on microcontact mechanism for the roughness dependent stick-slip motion
|
Wei, Pal Jen; Tsai, Pal Wei; Lin, Jen-Fin |
| 國立成功大學 |
2009-01 |
An integrated simulation and statistical technique for investigating the effect of interpenetration polymer brushes in a good solvent
|
Shen, Yan Xing; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2009 |
Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立成功大學 |
2008-12 |
Conjugate heat transfer simulation of a rectangular natural circulation loop
|
Lin, Jen-Fin; Chiu, S. Y.; Ho, Ching-Jenq |
| 國立成功大學 |
2008-12 |
Micro-contact analysis for the initial contact in nanoindentation tests
|
Wei, Pal Jen; Tsai, Pal Wei; Lin, Jen-Fin |
| 國立成功大學 |
2008-11-25 |
Determination for elasticity and plasticity from time-dependent nanoindentations
|
Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2008-11 |
Ferrule fabrication for the MT-type optical fiber connector using the microinjection process
|
Lee, Chung-Jui; Lin, Jen-Fin |
| 國立成功大學 |
2008-11 |
Detailed modeling of the adhesion force between an AFM tip and a smooth flat surface under different humidity levels
|
Chen, Sheng Chao; Lin, Jen-Fin |
| 國立成功大學 |
2008-10 |
Retardation of cyclic indentation creep exhibited in metal alloys
|
Wei, Pal Jen; Wang, Yun Che; Lin, Jen-Fin |
| 國立成功大學 |
2008-09-15 |
Modeling to evaluate the contact areas of hard materials during the nano-indentation tests
|
Han, Chang-Fu; Lin, Jen-Fin |
| 國立成功大學 |
2008-09-01 |
Analysis and modeling for time-dependent behavior of polymers exhibited in nanoindentation tests
|
Wei, Pal Jen; Shen, Wei Xin; Lin, Jen-Fin |
| 國立成功大學 |
2008-09 |
Initial and adhesive contact between a diamond indenter and polydimethylsiloxane
|
Shen, Yan Xing; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2008-09 |
Effect of fluctuations in the brush conformation on the interaction between polymer brushes in a good solvent
|
Shen, Yan Xing; Lin, Jen-Fin |
| 國立成功大學 |
2008-08-13 |
Theoretical modeling developed to evaluate the hardness and reduced modulus for the C/a-Si composite film using nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Lin, Jen-Fin; Chung, Chen-Kuei |
