| 國立成功大學 |
2015-02-01 |
Effects of prestrain applied to poly(ethylene terephthalate) substrate on microstructures and morphologies of porous TiO2 film and optical scattering behaviors of light
|
Li, Tse-Chang; Ho, Cheng-Fang; Lin, Jen-Fin |
| 國立交通大學 |
2014-12-08T15:37:38Z |
Analyses and experimental confirmation of removal performance of silicon oxide film in the chemical-mechanical polishing (CMP) process with pattern geometry of concentric groove pads
|
Wei, Chin-Chung; Horng, Jeng-Haur; Lee, An-Chen; Lin, Jen-Fin |
| 國立成功大學 |
2014-10-15 |
Effects of mold geometry and taper angles on the filling mechanism of a nanoimprinted polymer using molecular dynamics
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2014-10 |
Effects of deposition and annealing conditions on the defects in the Al/glass composites of TFT specimens
|
Li, Tse-Chang; Kao, Ming Tsung; Lin, Jen Fin |
| 國立成功大學 |
2014-06 |
Effects of inclination angle applied to a polyethylene terephalate substrate before the coating of Al-doped ZnO on film quality and mechanical and optical properties
|
Li, Tse-Chang; Chung, Chung-Jen; Han, Chang-Fu; Lin, Jen-Fin |
| 國立成功大學 |
2014-05 |
Optical Parameters in High-Efficiency Optical Receivers With a Parabolic Reflector Before and After Coating With Ag Film
|
Lee, Chung Jui; Lin, Jen Fin |
| 國立成功大學 |
2014-02-24 |
1-nm-thick graphene tri-layer as the ultimate copper diffusion barrier
|
Nguyen, Ba-Son; Lin, Jen-Fin; Perng, Dung-Ching |
| 國立成功大學 |
2014-01 |
Effects of prestrain applied to poly (ethylene terephthalate) substrate before coating of indium-tin-oxide film on film quality and optical, electrical, and mechanical properties
|
Li, Tse-Chang; Chung, Chung-Jen; Han, Chang-Fu; Hsieh, Po-Tsung; Chen, Kuan-Jen; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2014 |
Effects of mold geometry and taper angles on the filling mechanism of a nanoimprinted polymer using molecular dynamics
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2014 |
Effects of mold geometry and taper angles on the filling mechanism of a nanoimprinted polymer using molecular dynamics
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2013-09 |
Structural and mechanical properties of pre-strained transparent conducting oxide films on flexible substrate
|
Hsieh, Po Tsung; Li, Tse Chang; Wu, Bo Hsiung; Chung, Chung Jen; Lin, Jen Fin |
| 國立成功大學 |
2013-08 |
Effects of prestrain applied to poly(ethylene terephthalate) substrate on size, porosity, and geometry of TiO2 particles and optical properties of TiO2/PET specimens
|
Li, Tse-Chang; Chung, Chung-Jen; Han, Chang-Fu; Lin, Jen-Fin |
| 國立成功大學 |
2013-07 |
Fatigue Life Study of ITO/PET Specimens in Terms of Electrical Resistance and Stress/Strain Via Cyclic Bending Tests
|
Li, Tse-Chang; Han, Chang-Fu; Chen, Kuan-Ting; Lin, Jen-Fin |
| 國立成功大學 |
2013-07 |
Fractal Analysis for Vibrational Signals Created in a Ball-Screw Machine Operating in Short- and Long-Range Tribological Tests
|
Chang, Min-Chi; Liou, Jeng Luen; Wei, Chin-Chung; Horng, Jeng-Haur; Chiu, Yueh-Ling; Hwang, Yih Chyun; Lin, Jen Fin |
| 國立成功大學 |
2013-04 |
Thermal analysis of washer-on-disk wear test by micro-genetic algorithm
|
Chu, Hsiao-Yeh; Lin, Jen Fin; Hsieh, Hung-Tai; Chen, Guan-Lin; Li, Yi-Ting; Tsai, Ping-Hsueh |
| 國立成功大學 |
2013-03 |
Effects of pre-strain applied to a poly(ethylene terephthalate) substrate before TiO2 film deposition on the contact angle of the substrate and the morphology of the specimen
|
Li, Tse-Chang; Chen, Kuan-Ting; Chung, Chung-Jen; Song, Yen-Fang; Wang, Chun-Chieh; Lin, Jen-Fin |
| 國立成功大學 |
2012-10 |
Effects of Prestrain Applied to a Polyethylene Terephthalate Substrate Before the Coating of Al-Doped ZnO Film on Film Quality, Electrical Properties, and Pop-In Behavior During Nanoindentation
|
Li, Tse-Chang; Han, Chang-Fu; Wu, Bo-Hsiung; Hsieh, Po-Tsung; Lin, Jen-Fin |
| 國立成功大學 |
2012-08-01 |
Atomic-scale simulations of material behaviors and tribology properties for FCC and BCC metal films
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2012-08 |
Stress-strain analysis for evaluating the effect of the orientation of dentin tubules on their mechanical properties and deformation behavior
|
Han, Chang-Fu; Wu, Bo-Hsiung; Chung, Chung-Jen; Chuang, Shu-Fen; Li, Wang-Long; Lin, Jen-Fin |
| 國立成功大學 |
2012-07 |
Fractal Theory Applied to Evaluate the Tribological Performances of Two Greases Demonstrated in Four-Ball Tests
|
Liou, Jeng Luen; Sun, Yi Hsing; Lin, Jen Fin; Chiu, Yueh-Ling; Hulang, Yih-Chyun |
| 國立成功大學 |
2012-06-01 |
Effects of deposition conditions of the Al film in Al/glass specimens and annealing conditions on internal stresses and hillock formations
|
Kao, Ming Tsung; Lin, Jen Fin |
| 國立成功大學 |
2012-05-15 |
Effects of tip-substrate gap, deposition temperature, holding time, and pull-off velocity on dip-pen lithography investigated using molecular dynamics simulation
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2012 |
Atomic-scale simulations of material behaviors and tribology properties for FCC and BCC metal films
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2011-09-01 |
Effects of pre-strain applied at a polyethylene terephthalate substrate before the coating of TiO(2) film on the coating film quality and optical performance
|
Li, Tse-Chang; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2011-09 |
Effects of pre-strain applied at a polyethylene terephthalate substrate before the coating of Al-doped ZnO film on film quality and optical and electrical properties
|
Li, Tse-Chang; Hsieh, Po-Tsung; Lin, Jen-Fin |
| 國立成功大學 |
2011-09 |
Effects of Al film thickness and annealing temperature on the aluminum-induced crystallization of amorphous silicon and carrier mobility
|
Peng, Cheng-Chang; Chung, Chen-Kuei; Lin, Jen-Fin |
| 國立成功大學 |
2011-05-31 |
Deter mining buckling strain energy release rate through indentation-induced delamination
|
Wei, Pal Jen; Bin Chio, Sheng; Liang, Wen Long; Lin, Jen Fin |
| 國立成功大學 |
2011-05 |
The Interfacial Transition of the C/Si Composite Film and Si Substrate Evaluated to Predict the Pop-In Behavior in Nanoindentation
|
Han, Chang-Fu; Huang, Chao-Yu; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2011-01-12 |
Analyses and experimental confirmation of removal performance of silicon oxide film in the chemical-mechanical polishing (CMP) process with pattern geometry of concentric groove pads
|
Wei, Chin-Chung; Horng, Jeng-Haur; Lee, An-Chen; Lin, Jen-Fin |
| 國立成功大學 |
2011-01 |
Investigation of enhanced viscosity of squeezed liquids affected by solid-liquid absorptiveness via nanoindentation technique
|
Wei, Pal Jen; Shen, Yen Xing; Lin, Ting Fu; Lin, Jen Fin |
| 國立成功大學 |
2011-01 |
An Investigation of the Effects of Polymethylmethacrylate Orientation and Antistiction Layer on the Nanoimprint Process Using Molecular Dynamics
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2011 |
Effect of chain length of self-assembled monolayers in dip-pen nanolithography using molecular dynamics simulations
|
Wu, Cheng-Da; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2010-02-04 |
A microcontact model developed for sphere- and cylinder-based fractal bodies in contact with a rigid flat surface
|
Liou, Jeng-Luen; Tsai, Chi-Ming; Lin, Jen-Fin |
| 國立成功大學 |
2010-01-04 |
A modified fractal microcontact model developed for asperity heights with variable morphology parameters
|
Liou, Jeng Luen; Lin, Jen Fin |
| 國立成功大學 |
2010-01 |
Nanotribological behavior of diamond surfaces using molecular dynamics with fractal theory and experiments
|
Lin, Jen-Fin; Fang, Te-Hua; Wu, Cheng-Da; Houng, Ko-Han |
| 國立成功大學 |
2009-12 |
Analysis of a ball screw with a preload and lubrication
|
Wei, Chin Chung; Lin, Jen Fin; Horng, Jeng-Haur |
| 國立成功大學 |
2009-12 |
Reflectivity of an etched silicon surface with pyramids: II. Experimental results from different etching conditions
|
Wu, Chen Jian; Wei, Pal-Jen; Lin, Jen Fin |
| 國立成功大學 |
2009-11 |
The reflectivity of an etched silicon surface with pyramids: I. Theoretical model and its predictions
|
Wu, Chen Jian; Wei, Pal Jen; Lin, Jen Fin |
| 國立成功大學 |
2009-10-25 |
Plasma immersion ion implantation induced improvements of mechanical properties, wear resistance, and adhesion of diamond-like carbon films deposited on tool steel
|
Chen, Kuan-Wei; Lin, Jen-Fin; Tsai, Wen-Fa; Ai, Chi-Fong |
| 國立成功大學 |
2009-10-15 |
The nanoindentation applied to predict the interface delamination for the C/amorphous Si composite film
|
Han, Chang-Fu; Huang, Chao-Yu; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2009-08 |
Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立成功大學 |
2009-07-01 |
The study of adhesion and nanomechanical properties of DLC films deposited on tool steels
|
Chen, Kuan-Wei; Lin, Jen-Fin |
| 國立成功大學 |
2009-06-16 |
Characteristics of Water Strider Legs in Hydrodynamic Situations
|
Wei, Pal Jen; Shen, Yan Xing; Lin, Jen-Fin |
| 國立成功大學 |
2009-05 |
A Model Developed for the Adhesion Forces Formed between an Atomic Force Microscopy Tip and a Rough Surface under Different Humidity Levels
|
Chen, Sheng Chao; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-05 |
Multiscale Particle Dynamics on Nanocontact and Sliding Friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua; Lin, Hung-Yi; Chang, Shuo-Hung |
| 國立成功大學 |
2009-05 |
Modified method developed for contact-induced adhesion in indentation
|
Shen, Yan Xing; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-03 |
A Microcontact Model Developed for Asperity Heights with a Variable Profile Fractal Dimension, a Surface Fractal Dimension, Topothesy, and Non-Gaussian Distribution
|
Lion, J. L.; Lin, Jen-Fin |
| 國立成功大學 |
2009-03 |
Modified method for continuous stiffness measurement
|
Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-02-03 |
Adhesion Forces and Contact Angles of Water Strider Legs
|
Wei, Pal Jen; Chen, Sheng Chao; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-15 |
Determination of the strain energy release rate for C/a-Si composite film produced in nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Huang, Chao-Yu; Lin, Jen-Fin |
