| 國立成功大學 |
2009-12 |
Analysis of a ball screw with a preload and lubrication
|
Wei, Chin Chung; Lin, Jen Fin; Horng, Jeng-Haur |
| 國立成功大學 |
2009-12 |
Reflectivity of an etched silicon surface with pyramids: II. Experimental results from different etching conditions
|
Wu, Chen Jian; Wei, Pal-Jen; Lin, Jen Fin |
| 國立成功大學 |
2009-11 |
The reflectivity of an etched silicon surface with pyramids: I. Theoretical model and its predictions
|
Wu, Chen Jian; Wei, Pal Jen; Lin, Jen Fin |
| 國立成功大學 |
2009-10-25 |
Plasma immersion ion implantation induced improvements of mechanical properties, wear resistance, and adhesion of diamond-like carbon films deposited on tool steel
|
Chen, Kuan-Wei; Lin, Jen-Fin; Tsai, Wen-Fa; Ai, Chi-Fong |
| 國立成功大學 |
2009-10-15 |
The nanoindentation applied to predict the interface delamination for the C/amorphous Si composite film
|
Han, Chang-Fu; Huang, Chao-Yu; Wu, Bo-Hsiung; Lin, Jen-Fin |
| 國立成功大學 |
2009-08 |
Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立成功大學 |
2009-07-01 |
The study of adhesion and nanomechanical properties of DLC films deposited on tool steels
|
Chen, Kuan-Wei; Lin, Jen-Fin |
| 國立成功大學 |
2009-06-16 |
Characteristics of Water Strider Legs in Hydrodynamic Situations
|
Wei, Pal Jen; Shen, Yan Xing; Lin, Jen-Fin |
| 國立成功大學 |
2009-05 |
A Model Developed for the Adhesion Forces Formed between an Atomic Force Microscopy Tip and a Rough Surface under Different Humidity Levels
|
Chen, Sheng Chao; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-05 |
Multiscale Particle Dynamics on Nanocontact and Sliding Friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua; Lin, Hung-Yi; Chang, Shuo-Hung |
| 國立成功大學 |
2009-05 |
Modified method developed for contact-induced adhesion in indentation
|
Shen, Yan Xing; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-03 |
A Microcontact Model Developed for Asperity Heights with a Variable Profile Fractal Dimension, a Surface Fractal Dimension, Topothesy, and Non-Gaussian Distribution
|
Lion, J. L.; Lin, Jen-Fin |
| 國立成功大學 |
2009-03 |
Modified method for continuous stiffness measurement
|
Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2009-02-03 |
Adhesion Forces and Contact Angles of Water Strider Legs
|
Wei, Pal Jen; Chen, Sheng Chao; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-15 |
Determination of the strain energy release rate for C/a-Si composite film produced in nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Huang, Chao-Yu; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-14 |
A new method for determining the strain energy release rate of an interface via force-depth data of nanoindentation tests
|
Wei, Pal Jen; Liang, Wen Long; Ai, Chi Fong; Lin, Jen-Fin |
| 國立成功大學 |
2009-01-05 |
Analysis based on microcontact mechanism for the roughness dependent stick-slip motion
|
Wei, Pal Jen; Tsai, Pal Wei; Lin, Jen-Fin |
| 國立成功大學 |
2009-01 |
An integrated simulation and statistical technique for investigating the effect of interpenetration polymer brushes in a good solvent
|
Shen, Yan Xing; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2009 |
Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立成功大學 |
2008-12 |
Conjugate heat transfer simulation of a rectangular natural circulation loop
|
Lin, Jen-Fin; Chiu, S. Y.; Ho, Ching-Jenq |
| 國立成功大學 |
2008-12 |
Micro-contact analysis for the initial contact in nanoindentation tests
|
Wei, Pal Jen; Tsai, Pal Wei; Lin, Jen-Fin |
| 國立成功大學 |
2008-11-25 |
Determination for elasticity and plasticity from time-dependent nanoindentations
|
Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2008-11 |
Ferrule fabrication for the MT-type optical fiber connector using the microinjection process
|
Lee, Chung-Jui; Lin, Jen-Fin |
| 國立成功大學 |
2008-11 |
Detailed modeling of the adhesion force between an AFM tip and a smooth flat surface under different humidity levels
|
Chen, Sheng Chao; Lin, Jen-Fin |
| 國立成功大學 |
2008-10 |
Retardation of cyclic indentation creep exhibited in metal alloys
|
Wei, Pal Jen; Wang, Yun Che; Lin, Jen-Fin |
| 國立成功大學 |
2008-09-15 |
Modeling to evaluate the contact areas of hard materials during the nano-indentation tests
|
Han, Chang-Fu; Lin, Jen-Fin |
| 國立成功大學 |
2008-09-01 |
Analysis and modeling for time-dependent behavior of polymers exhibited in nanoindentation tests
|
Wei, Pal Jen; Shen, Wei Xin; Lin, Jen-Fin |
| 國立成功大學 |
2008-09 |
Initial and adhesive contact between a diamond indenter and polydimethylsiloxane
|
Shen, Yan Xing; Wei, Pal Jen; Lin, Jen-Fin |
| 國立成功大學 |
2008-09 |
Effect of fluctuations in the brush conformation on the interaction between polymer brushes in a good solvent
|
Shen, Yan Xing; Lin, Jen-Fin |
| 國立成功大學 |
2008-08-13 |
Theoretical modeling developed to evaluate the hardness and reduced modulus for the C/a-Si composite film using nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Lin, Jen-Fin; Chung, Chen-Kuei |
| 國立成功大學 |
2008-06 |
Effects of a self-assembled monolayer on the sliding friction and adhesion of an Au surface
|
Wu, C. D.; Lin, Jen-Fin; Fang, T. H.; Lin, H. Y.; Chang, S. H. |
| 國立成功大學 |
2008-05-15 |
Analyses of the work required to delaminate a coating film from a substrate under oscillating load conditions and the film-substrate contact behavior after delamination
|
Liou, Jeng-Luen; Wei, Pal-Jen; Liang, Wen-Long; Ai, Chi-Fong; Lin, Jen-Fin |
| 國立成功大學 |
2008-05 |
A new model developed to evaluate the contact area arising during nano-indentation tests with pileup behavior of metal materials
|
Han, Chang-Fu; Lin, Jen-Fin |
| 國立成功大學 |
2008-05 |
Multiscale particle dynamics in nanoimprint process
|
Wu, Cheng-Da; Lin, Jen-Fin |
| 國立成功大學 |
2008-05 |
A microcontact non-Gaussian surface roughness model accounting for elastic recovery
|
Liou, Jeng-Luen; Lin, Jen-Fin |
| 國立成功大學 |
2008-03 |
Calculations of the meniscus force and the contact force formed in the microcontacts of a rough surface and a smooth, rigid surface with a thin water film
|
Lin, Jen-Fin; Chen, S. C. |
| 國立成功大學 |
2008-01 |
Numerical and experimental studies for the anisotropic etching of silicon with the AFM oxide lines as masks
|
Lin, Jen-Fin; Wei, Pal Jen; Tal, Chih Kuang; Chung, Jung Ching |
| 國立高雄應用科技大學 |
2008 |
Multiscale Particle Dynamics on Nanocontact and Sliding Friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua; Lin, Hung-Yi; Chang, Shuo-Hung |
| 國立成功大學 |
2007-12 |
Elastic-plastic microcontact analysis of a sphere and a flat plate
|
Liou, Jeng-Luen; Lin, Jen-Fin |
| 國立成功大學 |
2007-10 |
Contact and frictional behavior of rough surfaces using molecular dynamics combined with fractal theory
|
Lin, Jen-Fin; Fang, Te-Hua; Wu, Cheng-Da; Houng, Ko-Han |
| 國立成功大學 |
2007-10 |
An elliptical elastic-plastic microcontact model developed for an ellipsoid in contact with a smooth rigid flat
|
Lin, Li Po; Lin, Jen-Fin |
| 國立成功大學 |
2007-07 |
A new microcontact model developed for variable fractal dimension, topothesy, density of asperity, and probability density function of asperity heights
|
Liou, Jeng-Luen; Lin, Jen-Fin |
| 國立成功大學 |
2007-06 |
Molecular dynamic simulation and characterization of self-assembled monolayer under sliding friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立成功大學 |
2007-04-15 |
Atomistic simulations of hard and soft films under nanoindentation
|
Liu, Cheng-Liang; Fang, Te-Hua; Lin, Jen-Fin |
| 國立成功大學 |
2007-04 |
A new method developed for brittle and ductile materials to evaluate mechanical properties of a lump specimen in the use of indentation test
|
Wei, Pal-Jen; Lin, Jen-Fin |
| 國立成功大學 |
2007-03-05 |
Effects of implantation temperature and volume flow rate ratio of nitrogen and hydrogen on nitrogen concentration distribution, mechanical properties, fatigue life, fracture toughness, and tribological behavior of plasma-nitrided P20, 718 and 420 steels
|
Lin, Jen-Fin; Chen, Kuan Wei; Xie, Jiang Qi; Wei, Chin Chung; Chung, Jung Ching; Li, Ming Yu; Ai, Chi-Fong |
| 國立高雄應用科技大學 |
2007 |
Atomistic simulations of hard and soft films under nanoindentation
|
Liu, Cheng-Liang; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2007 |
Molecular dynamic simulation and characterization of self-assembled monolayer under sliding friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立虎尾科技大學 |
2007 |
Contact and frictional behavior of rough surfaces using molecular dynamics combined with fractal theory
|
Lin, Jen-Fin;Fang, Te-Hua;Wu, Cheng-Da;Houng, Ko-Han |
| 國立成功大學 |
2006-07 |
Analysis of the tribological mechanisms arising in the chemical mechanical polishing of copper-film wafers when using a pad with concentric grooves
|
Lin, Jen-Fin; Chen, Sheng-Chao; Ouyang, Yu-Long; Tsai, Ming-Shih |
