| 國立成功大學 |
2007-03-05 |
Effects of implantation temperature and volume flow rate ratio of nitrogen and hydrogen on nitrogen concentration distribution, mechanical properties, fatigue life, fracture toughness, and tribological behavior of plasma-nitrided P20, 718 and 420 steels
|
Lin, Jen-Fin; Chen, Kuan Wei; Xie, Jiang Qi; Wei, Chin Chung; Chung, Jung Ching; Li, Ming Yu; Ai, Chi-Fong |
| 國立高雄應用科技大學 |
2007 |
Atomistic simulations of hard and soft films under nanoindentation
|
Liu, Cheng-Liang; Fang, Te-Hua; Lin, Jen-Fin |
| 國立高雄應用科技大學 |
2007 |
Molecular dynamic simulation and characterization of self-assembled monolayer under sliding friction
|
Wu, Cheng-Da; Lin, Jen-Fin; Fang, Te-Hua |
| 國立虎尾科技大學 |
2007 |
Contact and frictional behavior of rough surfaces using molecular dynamics combined with fractal theory
|
Lin, Jen-Fin;Fang, Te-Hua;Wu, Cheng-Da;Houng, Ko-Han |
| 國立成功大學 |
2006-07 |
Analysis of the tribological mechanisms arising in the chemical mechanical polishing of copper-film wafers when using a pad with concentric grooves
|
Lin, Jen-Fin; Chen, Sheng-Chao; Ouyang, Yu-Long; Tsai, Ming-Shih |
| 國立成功大學 |
2006-07 |
A new method developed for fractal dimension and topothesy varying with the mean separation of two contact surfaces
|
Liou, Jeng-Luen; Lin, Jen-Fin |
| 國立成功大學 |
2006-04 |
A new method for elastic-plastic contact analysis of a deformable sphere and a rigid flat
|
Lin, Li-Po; Lin, Jen-Fin |
| 國立成功大學 |
2006-03-01 |
Theoretical and experimental studies for nano-oxidation of silicon wafer by ac atomic force microscopy
|
Lin, Jen-Fin; Tai, Chih-Kuang; Lin, Shuan-Li |
| 國立成功大學 |
2006-02 |
Grey theory applied to evaluate the tribological performances of the a-C : H(N) coating films prepared by differing the nitrogen content and the film thickness
|
Lin, J. L.; Lin, Jen-Fin |
| 國立成功大學 |
2006-01 |
Thermal analysis for graphitization and ablation depths of diamond films
|
Lin, Jen-Fin; Lin, Jia-Wen; Wei, Pal-Jen |
| 國立成功大學 |
2006-01 |
Variation in fractal properties and non-Gaussian distributions of microcontact between elastic-plastic rough surfaces with mean surface separation
|
Chung, Jung-Ching; Lin, Jen-Fin |
| 國立成功大學 |
2006-01 |
Rolling-sliding analysis in ball bearing considering thermal effect
|
Liao, Neng-Tung; Lin, Jen-Fin |
| 國立成功大學 |
2006 |
General temperature rise solution for a moving plane heat source problem in surface grinding
|
Kuo, Wen-Liang; Lin, Jen-Fin |
| 國立虎尾科技大學 |
2006 |
Molecular dynamic simulation and characterization of self-assembled monolayer under sliding friction
|
Wu, Cheng-Da;Lin, Jen-Fin;Fang, Te-Hua |
| 國立虎尾科技大學 |
2006 |
Atomistic simulations of hard and soft films under nanoindentation
|
Liu, Cheng-Liang;Fang, Te-Hua;Lin, Jen-Fin |
| 國立成功大學 |
2005-12-21 |
A new method developed to evaluate both the hardness and elastic modulus of a coating-substrate system
|
Wei, Pal-Jen; Lin, Jen-Fin |
| 國立成功大學 |
2005-10 |
Thermal analysis of the transient temperatures arising at the contact spots of two sliding surfaces
|
Lin, Jen-Fin; Liu, Jen-Fin; Chen, Jeng-Wei; Chung, Ta-Chuan |
| 國立成功大學 |
2005-07 |
An elastoplastic microasperity contact model for metallic materials
|
Lin, Li-Po; Lin, Jen-Fin |
| 國立成功大學 |
2004-11-01 |
Effect of nitrogen content on mechanical properties and tribological behaviors of hydrogenated amorphous carbon films prepared by ion beam assisted chemical vapor deposition
|
Lin, Jen-Fin; Wan, Zer-Chuan; Wei, Pal-Jen; Chu, Hsiao-Yeh; Ai, Chi-Fong |
| 國立成功大學 |
2004-10 |
Fractal model developed for elliptic elastic-plastic asperity microcontacts of rough surfaces
|
Chung, Jung-Ching; Lin, Jen-Fin |
| 國立成功大學 |
2004-06-31 |
The effects of differing nitrogen implantation conditions on penetration depth, mechanical properties, and tribological behavior of plasma-nitrided AISI 304 stainless steel
|
Lin, Jen-Fin; Chen, Kuan-Wei; Wei, Chin-Chung; Ai, Chi-Fong |
| 國立成功大學 |
2004-03 |
An analysis of misaligned single-row angular-contact ball bearing
|
Liao, Neng-Tung; Lin, Jen-Fin |
| 國立成功大學 |
2004-02 |
The effect of under-layers and pre-test temperature on the tribological characteristics of TiN films rubbing against steel
|
Chang, Chong-Ching; Lin, Jen-Fin; Chen, Chung-Yi; Ai, Chi-Fong |
| 國立成功大學 |
2004-01 |
Effect of nitrogen content at coating film and film thickness on nanohardness and Young's modulus of hydrogenated carbon films
|
Lin, Jen-Fin; Wei, Pal-Jen; Pan, Jing-Chang; Ai, Chi-Fong |
| 國立成功大學 |
2004-01 |
Analysis of the tribological mechanisms arising in the chemical mechanical polishing of copper-film wafers
|
Lin, Jen Fin; Chern, Junne-Dar; Chang, Yang-Hui; Kuo, Ping-Lin; Tsai, Ming-Shih |
| 國立成功大學 |
2003-12 |
Kinematic analysis of the ball screw mechanism considering variable contact angles and elastic deformations
|
Wei, Chin-Chung; Lin, Jen-Fin |
| 國立成功大學 |
2003-07 |
A new method developed for the analysis of ball bearing fatigue life considering variable contact angles
|
Liao, Neng-Tung; Lin, Jen-Fin |
| 國立成功大學 |
2003 |
Sliding wear and fracture mechanisms of injection molded Cr3C2/Al2O3 composite
|
Jeng, Ching-An; Huang, Jow-Lay; Lin, Jen-Fin |
| 國立成功大學 |
2002-11 |
The response surface method and the analysis of mild oxidational wear
|
Lin, Jen-Fin; Chou, Chau-Chang |
| 國立勤益科技大學 |
2002-10 |
Antiwear performance of polysiloxane-containing copolymers at oil/metal interface under extreme pressure
|
Ni, Sheng-Chung;Kuo, Ping-Lin;Lin, Jen-Fin |
| 國立成功大學 |
2002-10 |
Antiwear performance of poly siloxane-containing copolymers at oil/metal interface under extreme pressure
|
Ni, Sheng-Chung; Kuo, Ping-Lin; Lin, Jen-Fin |
| 國立成功大學 |
2002-05 |
The effect of the additive concentration in emulsions to the tribological behavior of a cold rolling tube under sliding contact
|
Chen, Un Chia; Liu, Yu Shi; Chang, Chong-Ching; Lin, Jen Fin |
| 國立成功大學 |
2002-04 |
A new approach to the effect of EP additive and surface roughness on the pitting fatigue of a line-contact system
|
Chou, Chau-Chang; Lin, Jen-Fin |
| 國立勤益科技大學 |
2002-01 |
Ball Bearing Skidding under Radial and Axial Loads
|
Liao, Neng-Tung;Lin, Jen-Fin |
| 國立成功大學 |
2002-01 |
Ball bearing skidding under radial and axial loads
|
Liao, Neng-Tung; Lin, Jen-Fin |
| 國立成功大學 |
2001-06 |
A new method for the analysis of deformation and load in a ball bearing with variable contact angle
|
Liao, Neng-Tung; Lin, Jen-Fin |
| 國立成功大學 |
2001-05 |
Novel polymeric surfactants for improving chemical mechanical polishing performance of silicon oxide
|
Tseng, Wei-Tsu; Kuo, Ping-Lin; Liao, Chin-Lung; Lu, Rick; Lin, Jen-Fin |
| 國立成功大學 |
2001-04 |
The effects of strain hardened layer on pitting formation during rolling contact
|
Chue, Ching-Hwei; Chung, H. H.; Lin, Jen-Fin; Chou, Chau-Chang |
| 國立成功大學 |
2001-01-02 |
Tribological characteristics of titanium nitride and titanium carbonitride multilayer films Part I. The effect of coating sequence on material and mechanical properties
|
Wei, Chehung; Lin, Jen-Fin; Jiang, Tsae-Hwa; Ai, Chi-Fong |
| 國立成功大學 |
2001-01-02 |
Tribological characteristics of titanium nitride and titanium carbonitride multilayer films Part II. The effect of coating sequence on tribological properties
|
Wei, Chehung; Lin, Jen-Fin; Jiang, Tsae-Hwa; Ai, Chi-Fong |
| 淡江大學 |
2000/06/05 |
Process and apparatus for plating copper on particulate graphite
|
Lin, Ching-Bin;Lin, Jen-Fin |
| 國立成功大學 |
2000-04 |
Experimental analysis of the tribological behavior of electroless nickel-coated graphite particles in aluminum matrix composites under reciprocating motion
|
Chu, Hsiao-Yeh; Lin, Jen-Fin |
| 國立成功大學 |
1998-04 |
Tribological performance of 6061 aluminum alloy graphite materials under oil-lubricated and dry sliding conditions
|
Lin, Jen Fin; Yung, Ying Chong; Tsao, Chi Yuan |
