臺灣學術機構典藏系統 (Taiwan Academic Institutional Repository, TAIR)

關於TAIR
	計畫說明

瀏覽
	典藏機構
	作者
	題名
	日期
	統計圖表
	機構即時統計
	學術趨勢

消息
	2019臺灣學術機構典藏研討會
	機構典藏系統RC7版本已發佈

著作權
	出版社及期刊政策查詢
	TAIR著作權會議記錄

相關連結
	機構典藏計畫網站
	ROAR
	OpenDOAR
	SHERPA
	OAIster
	JAIRO
	Ira
	DSPACE
	RWWR
	臺大學術典藏NTU Scholars

"lin z c"的相關文件

回到依作者瀏覽
依題名排序	依日期排序

顯示項目 51-100 / 220 (共5頁)
<< < 1 2 3 4 5 > >>
每頁顯示[10|25|50]項目

機構	日期	題名	作者
國立臺灣科技大學	2010	Distribution of polishing times for a wafer with different patterned polishing pads during CMP and CCMP	Lin Z.-C.; Chen C.-C.
國立臺灣科技大學	2010	Combining the Taguchi method with an artificial neural network to construct a prediction model for near-field photolithography experiments	Lin Z.-C.; Yang C.-B.
國立臺灣科技大學	2010	Construction and analysis of nanoscale simulative measuring model for scanning near-field optical microscope	Lin Z.-C.; Chou M.-H.
國立臺灣科技大學	2010	Three dimensional quasi-steady orthogonal nanocutting model and simulation analysis	Lin Z.-C.; Yang J.-M.
國立臺灣科技大學	2010	Evaluation priority of design decision using a modified analytical hierarchy process and a knowledge coding system for a web frame structure	Lin Z.-C.; Cheng C.-H.
國立臺灣科技大學	2010	Three Dimensional Nanoscale Abrasive Cutting Simulation and Analysis for Single-Crystal Silicon Workpiece	Lin, Z.C.;Wang, R.Y.
南亞技術學院	2010	Combining the Taguchi method with an artificial neural network to construct a prediction model for near-field photolithography experiments	Lin, Z-C; Yang, C-B
國立臺灣科技大學	2009-04	Anti-collision algorithm with the aid of interference cancellation and tag set partitioning in radio-frequency identification systems	Tseng, D.-F.;Lin, Z.-C.
國立臺灣科技大學	2009	Performance of coated tungsten carbide tools on milling printed circuit board	Lin Z.-C.; Ho C.-Y.
國立臺灣科技大學	2009	The determination of material strength coefficient and strain hardening constant by inverse method	Lin Z.-C.; Chen C.-C.; Wang H.-H.
國立臺灣科技大學	2009	Innovation procedure for polishing times calculations of compensated cmp using multiple steps of the modified triz method	Lin Z.-C.; Chen C.-C.
國立臺灣科技大學	2009	Inverse model of fiber probe aperture size using a non-destructive method	Lin Z.-C.; Yang C.-B.
國立臺灣科技大學	2009	Error analysis and regression mode of the V-grooved sample in the atomic force microscope simulation measurement mode by the molecular mechanics	Lin Z.-C.; Huang J.-C.; Yeh C.-H.
國立臺灣科技大學	2009	Quality improvement by using grey prediction tool compensation model for uncoated and TiAlCN-coated tungsten carbide tools in depanel process of memory modules	Lin Z.-C.; Ho C.-Y.
國立臺灣科技大學	2009	A simulative measuring model of scanning near-field optical microscope by applying aluminum atoms of FCC structure for the nano-scale standard sample and the qualitative analysis	Lin Z.-C.; Chou M.-H.
國立臺灣科技大學	2009	A band-type network model for the time-series problem used for IC leadframe dam-bar shearing process	Lin Z.-C.; Chang D.-Y.
國立臺灣科技大學	2009	Line segment fabrication model analysis of near-field photolithography	Lin Z.-C.; Yang C.-B.
國立臺灣科技大學	2009	Nanocutting force investigation of single atom with the defectless single crystal in the cutting direction [100] and on the orientation (001) of Cu and Ni materials	Lin Z.-C.; Huang W.-F.
國立臺灣科技大學	2009	Nanocutting Force Investigation of Single Atom with the Defectless Single Crystal in the Cutting Direction 100 and on the Orientation (001) of Cu and Ni Materials	Lin, Z.C.;Huang, W.F.
國立臺灣科技大學	2009	Quasi-steady Molecular Statics Model for Simulation of Nanoscale Cutting with Different Diamond Cutters	Lin, Z.C.;Ye, J.R.
國立臺灣科技大學	2008	An anti-collision algorithm in RFID systems based on interference cancellation and tag set partitioning	Tseng D.-F.; Lin Z.-C.
中國文化大學	2008	A Neural Networks Approach Combined with Taguchi's Method for IC Leadframe Dam-bar Shearing Process	Lin, Z. C.; Chang, D. Y.
國立臺灣科技大學	2008	A neural networks approach combined with Taguchi's method for IC leadframe dam-bar shearing process	Lin, Z.-C.;Chang, D.-Y.
國立臺灣科技大學	2008	Development of CMP knowledge-based multi-agent system by application of ontology	Lin, Z.-C.;Chen, C.-C.;Lin, S.-H.
國立臺灣科技大學	2008	Analysis of simulated scanning of atomic-scale silicon surface by atomic force microscopy	Lin, Z.-C.;Liu, S.-C.
國立臺灣科技大學	2008	Study of estimation of damping coefficient and angular displacement for air motor rotation experiment	Lin, Z.-C.;Huang, C.-J.
國立臺灣科技大學	2008	The study of deformation and stress-strain distribution of nano-scale thin sheet copper under the biaxial tensile loads by using molecular dynamics and finite-element method	Lin, Z.-C.;Huang, J.-C.;Chao, Y.-C.
國立臺灣科技大學	2008	The influence of different cutting speeds on the cutting force and strain-stress behaviors of single crystal copper during nano-scale orthogonal cutting	Lin, Z.-C.;Huang, J.-C.
國立臺灣科技大學	2008	A study of the estimation method of the cutting force for a conical tool under nanoscale depth of cut by molecular dynamics	Lin, Z.-C.;Huang, J.-C.
國立臺灣科技大學	2008	A study of deformation and stress-strain distribution of nano-scale rod under bending load by molecular dynamics and FEM	Lin, Z.-C.;Huang, J.-C.;Chao, Y.-C.
國立臺灣科技大學	2007	Elastic-Plastic Finite Element Analysis for Oblique Cutting with Discontinuous Chip of 6-4 Brass	Lin, Z. C.;Lin, Y. Y.
國立臺灣科技大學	2007	3D nano-scale cutting model for nickel material	Lin, Z.-C.;Huang, J.-C.;Jeng, Y.-R.
國立臺灣科技大學	2007	Estimation of damping coefficient for a pneumatic cylinder motion experiment	Lin, Z.-C.;Huang, C.-J.
國立臺灣科技大學	2007	The building of spindle thermal displacement model of high speed machine center	Lin, Z.-C.;Chang, J.-S.
國立臺灣科技大學	2007	Establishment of a cutting force model and study of the stress-strain distribution in nano-scale copper material orthogonal cutting	Lin, Z.-C.;Chen, Z.-D.;Huang, J.-C.
國立臺灣科技大學	2007	An investigation of stresses induced by temperature variation in integrated circuit molding process	Lin, Z.-C.;Chen, C.-C.
國立臺灣科技大學	2007	A strategy for improvement of the Cpk of DRAM modules in the depanel process of PCBA	Lin, Z.-C.;Ho, C.-Y.
國立臺灣科技大學	2007	Analysis on the offset error of cross-section contour by using the simulated measurement model of atomic force microscopy	Lin, Z.-C.;Huang, J.-C.;Zeng, B.-J.
國立臺灣科技大學	2007	Friction coefficient investigation on IC dam-bar trimming process by inverse method with experimental trimmed geometric profiles	Lin, Z.-C.;Chen, C.-C.
國立臺灣科技大學	2006	Two-dimension three-atom removal model for (110) plane nanocutting of defectless crystals of copper, nickel and silver in [001] direction	Lin Z.-C.; Huang W.-F.
國立臺灣科技大學	2006	Inverse calculation of the friction coefficient for upsetting a cylindrical mild steel by the experimental load	Lin, Z.-C.;Chen, C.-k.
國立臺灣科技大學	2006	Matrix-presentation linear least square error method of inverse elastic-plastic large deformation finite element model for upsetting	Lin, Z.-C.;Lin, V.-H.
國立臺灣科技大學	2006	Friction coefficient of upsetting with a procedure of combining the inverse model and the Tikhonov method	Lin, Z.-C.;Lin, V.-H.
國立臺灣科技大學	2006	Effect of different tool flank wear lengths on the deformations of an elastic cutting tool and the machined workpiece	Lin, Z.-C.;Lo, S.-P.
國立臺灣科技大學	2006	Analysis of point fabrication model for near-field photolithography with experimental study	Lin, Z.-C.;Yang, C.-B.
國立臺灣科技大學	2004	A study on a rigid body boundary layer interface force model for stress calculation and stress–strain behaviour of nanoscale uniaxial tension	Lin, Z. C.;Huang, J. C.
國立臺灣科技大學	2003	The Application of the Moment Equilibrium Model to the Offset of Pressure Center of Trimming Progressive Die in IC Packaging Machine	Lin, Z. C.;Chen, C. C.
國立臺灣科技大學	2003	A New Tool Wear Examination Model by Least Square Method of Shearing Process of Thin Metal Sheet	Lin, Z. C.;Chang, D. Y.
國立臺灣科技大學	2003	Analysis and Application of the adaptive neuro-fuzzy inference system in prediction of CMP machining parameters	Lin, Z. C.;Liu, C. Y.
國立臺灣科技大學	2003	Temperature Field Analysis of IC Molding Process Based on Three Dimensional Finite Element Analysis	Lin, Z. C.;Chen, C. C.

顯示項目 51-100 / 220 (共5頁)
<< < 1 2 3 4 5 > >>
每頁顯示[10|25|50]項目

	English \| 正體中文 \| 简体中文 \| 總筆數 :0
	造訪人次 : 52361724 線上人數 : 1146 教育部委託研究計畫計畫執行:國立臺灣大學圖書館