| 國立成功大學 |
2013 |
Microstructures and Mechanical Properties of Austempering Cr-Mo (SCM 435) Alloy Steel
|
Chen, Cheng-Yi; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2013 |
Effects of Friction Stir Process and Stabilizing Heat Treatment on the Tensile and Punch-Shear Properties of Mg-9Li-2Al-1Zn Magnesium Alloy
|
Chen, Hsiang-Ching; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui; Huang, Jiun-Wei |
| 國立成功大學 |
2013 |
Crystallographic Dependence on Deformation Characteristics of Friction Stir Processed Pure Aluminum
|
Chen, Ssu-Ta; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012-11 |
= Electric Current-Induced Liquation Features of Cast Pure Tin
|
Lan, Gong-An; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012-09 |
Effects of friction stir processing and artificial peak aging on erosion resistance of Al-11Si-4Cu-2Ni-0.7Mg cast alloy
|
Yang, Chung-Wei; Chang, Yun-Han; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012-09 |
Effects of Vacuum Annealing on the Charge-Discharge Characteristics of Eutectic Al-Si/Al Thin Film as Anode Material for Li-Ion Batteries
|
Wu, Chao-Han; Lui, Truan-Sheng; Hung, Fei-Yi; Chen, Li-Hui |
| 國立成功大學 |
2012-08 |
Effect of 100 degrees C Heating on Further Ductility Improvement of Friction Stir Processed AZ31 Magnesium Alloy
|
Lee, Hsin-Wei; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012-06 |
Clarification of the Fracture Location in Friction Stir Processed AZ31 Mg Alloy through Examination of Globe and Miniature Specimens
|
Lee, Hsin-Wei; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012-06 |
Microstructural Characteristics of Electric Discharge Alloyed Layers on Spheroidal Graphite Cast Iron with Different Electrode Materials
|
Lin, Hung-Mao; Lui, Truan-Sheng |
| 國立成功大學 |
2012-05 |
Effect of low concentration of Mn2+ and Zn2+ on the physicochemical and biological properties of porous coatings
|
Kung, Kuan-Chen; Liu, Yen-Ting; Lee, Tzer-Min; Lui, Truan-Sheng |
| 國立成功大學 |
2012-05 |
Microstructural Effects of Zn/Mg Ratio and Post Heat Treatment on Tensile Properties of Friction Stirred Process (FSP) Al-xZn-yMg Alloys
|
Ku, Ming-Hsiang; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui; Chiang, Wen-Ting |
| 國立成功大學 |
2012-04 |
Microstructural Characteristics of InGaZnO Thin Film Using an Electrical Current Method
|
Chen, Yen-Ting; Hung, Fei-Yi; Chang, Shoou-Jinn; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012-03-01 |
Effects of calcium-phosphate topography on osteoblast mechanobiology determined using a cytodetacher
|
Yang, Shih-Ping; Yang, Chyun-Yu; Lee, Tzer-Min; Lui, Truan-Sheng |
| 國立成功大學 |
2012-02-25 |
Effect of heat treatment on microstructures and mechanical behavior of porous Sr-Ca-P coatings on titanium
|
Kung, Kuan-Chen; Yuan, Kuo; Lee, Tzer-Min; Lui, Truan-Sheng |
| 國立成功大學 |
2012-01 |
Microstructural Features and Erosion Wear Resistance of Friction Stir Surface Hardened Spheroidal Graphite Cast Iron
|
Cheng, Tun-Wen; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2012 |
Electrical Crystallization Mechanism and Interface Characteristics of Nanowire ZnO/Al Structures Fabricated by the Solution Method
|
Tseng, Yi-Wei; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Yen-Ting; Xiao, Ren-Syuan; Chen, Kuan-Jen |
| 國立成功大學 |
2011-11 |
Electrical current induced mechanism in microstructure and nano-indention of Al-Zn-Mg-Cu (AZMC) Al alloy thin film
|
Hung, Fei-Yi; Liao, Jiunn-Der; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2011-08 |
Correlation between Microstructural Stability and Tensile Properties of FSWed Al-Mg-Mn Cast Plate during Subsequent Thermal Exposure
|
Lin, Chun-Yi; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2011-06 |
Verification of Optimum Temperature on Tensile Ductility Improvement of Friction Stir Processed AZ31 at Warm Temperature Range up to 300 degrees C
|
Lee, Hsin-Wei; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2011-01 |
Effect of the Twins on Mechanical Properties of AISI 304 Stainless Steel Wire Using Electrical Current Method
|
Chuang, Hsu-Chi; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2011-01 |
Effect of Zinc Content on Microstructural Evolution and Electrification-Fusion-Induced Failure Mechanism of Sn-xZn Alloys
|
Lan, Gong-An; Yang, Chung-Wei; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2011-01 |
Embrittlement Mechanism on Tensile Fracture of 7075 Al Alloy with Friction Stir Process (FSP)
|
Ku, Ming-Hsiang; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui |
| 國立成功大學 |
2011-01 |
A study on the tensile fracture mechanism of 15 mu m copper wire after EFO process
|
Huang, I-Ting; Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui; Hsueh, Hao-Wen |
| 國立成功大學 |
2011-01 |
An investigation into the crystallization and electric flame-off characteristics of 20 mu m copper wires
|
Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui; Hsueh, Hao-Wen |
| 國立成功大學 |
2011 |
Effects of Ordered Texture Surface with Nanometric Scale Roughness on Biological Responses for Titanium Implants
|
Lui, Truan-Sheng; Lee, Tzer-Min; Kung, Kuan-Chen |
