| 國立成功大學 |
2016-06 |
Developing Electromechanical Coupling Macro Models for Dynamic Responses of MEMS Structures With Command Shaping Techniques
|
Ou, Kuang-Shun; Chen, Kuo-Shen |
| 國立成功大學 |
2014-06 |
IR Indoor Localization and Motion Control in Smart Living Space Applications Based on Wiimote Technology: A Preliminary Demonstration
|
Chen, Bo-Wei; Gu, Di; Ou, Kuang-Shun; Chen, Kuo-Shen |
| 國立成功大學 |
2014-03 |
Pull-in Voltage Estimation of Microcantilever Beams With Effects of Residual Stress Gradients and Capacitance Fringing
|
Ou, Kuang-Shun; Chen, Kuo-Shen |
| 國立成功大學 |
2012-09 |
A one-dimensional touch panel based on strain sensing
|
Pi, Chia-Hsing; Tsai, I-Fang; Ou, Kuang-Shun; Chen, Kuo-Shen |
| 國立成功大學 |
2011-04 |
A Novel Semianalytical Approach for Finding Pull-In Voltages of Micro Cantilever Beams Subjected to Electrostatic Loads and Residual Stress Gradients
|
Ou, Kuang-Shun; Chen, Kuo-Shen; Yang, Tian-Shiang; Lee, Sen-Yung |
| 國立成功大學 |
2011-02 |
Fast Positioning and Impact Minimizing of MEMS Devices by Suppression of Motion-Induced Vibration by Command-Shaping Method
|
Ou, Kuang-Shun; Chen, Kuo-Shen; Yang, Tian-Shiang; Lee, Sen-Yung |
| 國立成功大學 |
2011-01 |
On the influence of roller misalignments on the web behavior during roll-to-roll processing
|
Chen, Kuo-Shen; Ou, Kuang-Shun; Liao, Yen-Ming |
| 國立成功大學 |
2009-10 |
Viscoelastic Characterization and Modeling of Polymer Transducers for Biological Applications
|
Lin, I-Kuan; Ou, Kuang-Shun; Liao, Yen-Ming; Liu, Yan; Chen, Kuo-Shen; Zhang, Xin |
| 國立成功大學 |
2009-03 |
Design of command shapers for residual vibration suppression in Duffing nonlinear systems
|
Chen, Kuo-Shen; Yang, Tian-Shiang; Ou, Kuang-Shun; Yin, Jui-Feng |
| 國立成功大學 |
2008-12-22 |
Viscoelastic mechanical behavior of soft microcantilever-based force sensors
|
Lin, I-Kuan; Liao, Yen-Ming; Liu, Yan; Ou, Kuang-Shun; Chen, Kuo-Shen; Zhang, Xin |
| 國立成功大學 |
2008-07-23 |
非線性輸入修正法於靜電致動系統在穩定及非穩定區內之定位與減振研究
|
歐廣順; Ou, Kuang-Shun |
| 國立成功大學 |
2008-07-23 |
非線性輸入修正法於靜電致動系統在穩定及非穩定區內之定位與減振研究
|
歐廣順; Ou, Kuang-shun |
| 國立成功大學 |
2008-06 |
Evaluation of KMPR etching process for fabrication of high resolution hard X-ray zone plates
|
Ou, Kuang-Shun; Yan, H. Y.; Chen, Kuo-Shen |
| 國立成功大學 |
2008-06 |
Mechanical properties measurement of PECVD silicon nitride after rapid thermal annealing using nanoindentation technique
|
Yan, H. Y.; Ou, Kuang-Shun; Chen, Kuo-Shen |
| 國立成功大學 |
2008-02-01 |
Development of semi-empirical formulation for extracting materials properties from nanoindentation measurements: Residual stresses, substrate effect, and creep
|
Chen, Kuo-Shen; Chen, Tuo-Cheng; Ou, Kuang-Shun |
| 國立成功大學 |
2007-06 |
Command-shaping techniques for electrostatic MEMS actuation: Analysis and simulation
|
Chen, Kuo-Shen; Ou, Kuang-Shun |
| 國立成功大學 |
2007-04-30 |
Development and verification of 2D dynamic electromechanical coupling solver for micro-electro static-actuator applications
|
Chen, Kuo-Shen; Ou, Kuang-Shun |
| 國立成功大學 |
2004-04-15 |
Equivalent strengths for reliability assessment of MEMS structures
|
Chen, Kuo-Shen; Ou, Kuang-Shun |
| 國立成功大學 |
2004-02 |
Development and accuracy assessment of simplified electromechanical coupling solvers for MEMS applications
|
Chen, K. S.; Ou, Kuang-Shun; Li, L. M. |
| 國立成功大學 |
2003-05-30 |
微機電機率化結構設計分析與材料測試強度整合之研究
|
歐廣順; Ou, Kuang-Shun |
| 國立成功大學 |
2003-05-30 |
微機電機率化結構設計分析與材料測試強度整合之研究
|
歐廣順; Ou, Kuang-Shun |
| 國立成功大學 |
2002-11 |
Modification of curvature-based thin-film residual stress measurement for MEMS applications
|
Chen, Kuo-Shen; Ou, Kuang-Shun |
