| 中國醫藥大學 |
2001-12-08 |
Pharmacokinetics of Baicalin, Paeoniflorin and Glycyrrhizic acid in Rabbits After Intravenous and Oral Administration of Huang-Chin-Tang
|
(S.C.Chen); (M.K.Kuo); 邱泰惠(Chiu,Tai-Hui); 劉正雄(Liu,Cheng-Hsiung) |
| 中原大學 |
2001-12 |
The relationship between FTL and NA, DMV or CVLM in central cardiovascular control
|
J.H. Hsieh;Y.C. Chang;J.L. Chung;M.C. Hsiao;S.C. Chen;C.T. Yen;C.Y. Chai |
| 南台科技大學 |
2001-10 |
Originals and effects of radical-induced re-oxidation in ultra-thin remote plasma nitrided oxides
|
C. H. Chen; Y. K. Fang; W. T. Hsieh; S. F. Ting; M. C. Yu; M. F. Wang; C. L. Chen; L. G. Yao; S. C. Chen; C. H. Yu; M. S. Liang;陳順智;謝文哲 |
| 修平科技大學 |
2001 |
Correlations Between Theoretical and Experimental Determination of Heat of Formation of Certain Aliphatic Nitro Compounds
|
P.C. Chen;J.C. Wu;S.C. Chen |
| 修平科技大學 |
2001 |
Theoretical Study of the Internal Rotational Barriers in Nitrobenzene, 2-Nitrotoluene, 2-Nitrophenol, and 2-Nitroaniline
|
P.C. Chen;S.C. Chen |
| 修平科技大學 |
2001 |
Theoretical Study of the Internal Rotational Barries in Nitrobenzene, 2-Nitrotoluene, 2-Nitrophenol,and 2-Nitroaniline
|
P.C.Chen;S.C.Chen |
| 南台科技大學 |
2001 |
Design and Implementation of a Patient's Controller for Implantable Microstimulator
|
梁治國; Chih-Kuo Liang; M. Z. Lee; Jia-Jin J. Chen; S. C. Chen; P. J. Chen |
| 中原大學 |
2001 |
Integrated ''CAE'' Strategies for the Design of Machine Tool Spindle-Bearing Systems
|
Y. Kang;Y. P. Chang;J. W. Tsai;S. C. Chen;L. K. Yang |
| 國立中山大學 |
2001 |
Electron and Laser Beam Welding of High Strain Rate Superplastic Al-6061/SiC Composites
|
R.Y. Huang;S.C. Chen;J.C. Huang |
| 國立中山大學 |
2001 |
Development of biobarrier for the remediation of PCE-contaminated aquifer
|
C.M. Kao;S.C. Chen;J.K. Liu |
| 修平科技大學 |
2000 |
Simulation of the mold-coolling for the gas-assisted injection molede parts designed with a top-rib on the gas channel
|
S.C. Chen;S,Y. Hu;S.M. Chao;R.D. Chien |
| 修平科技大學 |
2000 |
Dynamic modeling of gas pressure control system for gas-assisted injection molding process
|
S.M. Chao;S.M.Wang;S.C.Chen |
| 國立中山大學 |
2000 |
High Energy Beam Welding Characteristics in 6061/SiC Aluminum Matrix Composites
|
R.Y. Huang;S.C. Chen;J.C. Huang |
| 國立中山大學 |
2000 |
Welding Microstructures in 6061 alloys and 6061/SiC composites
|
S.C. Chen;R.Y. Huang;J.C. Huang |
| 修平科技大學 |
1999 |
Closed loop control of gas pressure in the gas-assisted injection molding process
|
S.C.Chen;S.M. Chao |
| 修平科技大學 |
1999 |
Evaluation of gas pressure dynamics for gas-assisted injection molding process
|
S.M. Chao;S.M.Wang;S.C.Chen;F.R.Gao |
| 中原大學 |
1999 |
Integrated Simulations of Structural Performance, Molding Process and Warpage for Gas-Assisted Injection-molded Parts. Part III: Simulation of Cyclic, Transient Variations in Mold Wall Temperatures
|
S. C. Chen;S. Y. Hu;W. R. Jong |
| 國立中山大學 |
1999 |
Influence of Welding Parameters on Microstructures and Mechanical Properties of Electron Beam Welded Aluminum-Lithium Plates
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1999 |
Comparison of Post-Weld Microstructures and Mechanical Properties of Electron- and Laser-Beam Welded Al Plates
|
S.C. Chen;J.C. Huang |
| 國立高雄第一科技大學 |
1998.10 |
Simulation of injection-compression mold-filling process
|
S.C.Chen;Y.C.Chen;N.T.Cheng;Huang, Ming-Shyan; 黃明賢 |
| 中原大學 |
1998 |
Simulation of Gas-Assisted Injection Mold-Cooling Process Using Line Source Model Approach for Gas Channel
|
Y. P. Chang;S. Y. Hu;S. C. Chen |
| 中原大學 |
1998 |
Simulation of Injection-Compression Mold-Filling Process
|
S. C. Chen;Y. C. Chen;N. T. Cheng;Ming-Shyan Huang |
| 國立中山大學 |
1998 |
Normalization of Charpy or Bending Data While Using Non-Standard Specimens
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1998 |
Normalization of Charpy or Bending Data While Using Non-Standard Specimens
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1998 |
Effects of Electron Beam Welding Speed on Microstructure and Mechanical Properties of Aluminum Welds
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1997 |
VDBMS: A Solution to Integrating Heterogeneous Data Sources
|
S.C. Chen;M. Yu;Y.Y. Yao;S.Y. Hwang;B.P. Lin |
| 國立中山大學 |
1997 |
The Lap-Shear and T-Peel Strength of Overlap Joints of Superplastic 8090 Al-Li Sheets Bonded by Electron-Beam and Laser-Beam Welding
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1997 |
Effects of Electron Beam Welding Power on Toughness of Aluminum Welds
|
S.C. Chen;J.C. Huang |
| 中原大學 |
1996-10 |
Effect of Mold Heat Transfer on the Curing Reaction of Epoxy Molding Compound During Transfer Molding
|
S. Y. Hu;Y. P. Chang;W. R. Jong;S. C. Chen |
| 國立中山大學 |
1996 |
Joining Efficiency Evaluation of Superplastic 8090 Al-Li Thin Sheets Using Electron or Laser Beam Welding
|
J.C. Huang;S.C. Chen;M.F. Lee;Y.D. Shen |
| 國立中山大學 |
1996 |
Fasibility Study on Electron-Beam and Laser-Beam Welding of Aircraft-Used Al-Li Thick Plates
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1995 |
Lap-Shear Strength of Electron-Beam and Laser-Beam Welded Overlap Joints in 8090 Al-Li Alloy
|
S.C. Chen;J.C. Huang |
| 國立中山大學 |
1994 |
Shear-lap Electron-Beam and Laser-Beam Welding of Aircraft-Used Al-Li Alloys
|
S.C. Chen;J.C. Huang;M.F. Lee |
| 國立中山大學 |
1994 |
Electron-Beam and Laser-Beam Welding of Aircraft-Used Al-Li Alloys
|
S.C. Chen;J.C. Huang;Y.D. Shen;M.F. Lee |
| 國立中山大學 |
1994 |
Laser Welding in Superplastic 8090 Al-Li Alloys
|
M.F. Lee;J.C. Huang;N.J. Ho;G.S. Go;S.C. Chen |
| 國立中山大學 |
1990-07 |
High Resolution Frequency Estimation Using the Sub-optimal Eigen-decomposition Method and Adaptive Filtering
|
S.J. Chern;S.C. Chen |
| 國立中山大學 |
1990 |
High Resolution Frequency Estimation Using the Sub-optimal Eigen-decomposition Method and Adaptive Filtering
|
S.J. Chern;S.C. Chen |
| 南台科技大學 |
1989 |
Phase Transformation of an Fe-Mn-Al Alloy at High Temperature
|
吳忠春; S.C. Chen; C.C. Wu; T.F. Liu |
| 元智大學 |
18-Jun |
Development of a two-stage biotransformation system for mercury-contaminated soil remediation
|
S.C. Chen; W.H. Lin; Chien C.-C.; D.C.W. Tsang; C.M. Kao |
