| 臺大學術典藏 |
2020-01-13T08:23:27Z |
Fracture types and thickness distribution in superplastic sheets formed with plastic injection molding
|
Parng, S.H.; Yang, S.Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:27Z |
Study on the residual wall thickness at dimensional transitions and curved sections in gas-assisted molded circular tubes
|
Yang, S.Y.; Chou, H.L.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:27Z |
Flow visualization of filling process during micro-injection molding
|
Yang, S.Y.; Nian, S.C.; Sun, I.C.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:27Z |
Injection molding of plastic plates combined with boss features on superplastic Zn-22Al sheet
|
SEN-YEU YANG; Parng, S.H.; Yang, S.Y. |
| 臺大學術典藏 |
2020-01-13T08:23:27Z |
Gas pressurized hot embossing for transcription of micro-features
|
Chang, J.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:26Z |
Kneading and molding of ceramic microparts by precision powder injection molding (PIM)
|
Yang, S.Y.; Huang, C.K.; Lin, B.C.; Wei, W.C.J.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:26Z |
Molding of thin sheets using impact micro-injection molding
|
Nian, S.C.; Yang, S.Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:26Z |
Study on numerical simulation and experiment of lightguide plate in injection molding
|
Shen, Y.K.; Wu, W.Y.; Yang, S.Y.; Jian, H.M.; Chen, C.-C.A.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:26Z |
Flow visualization of filling with aid of colored billets during impact micro-injection molding
|
Nian, S.C.; Yang, S.Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
A novel method for fabrication of plastic microlens array with aperture stops for projection photolithography
|
Chang, C.-Y.; Yang, S.-Y.; Wu, M.-S.; Jiang, L.-T.; Wang, L.A.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping process
|
Chang, C.-Y.; Yang, S.-Y.; Chu, M.-H.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
Singular uniformity after reflow of varied-shaped flip chip solder bump on single substrate
|
Hsu, H.-J.; Huang, J.-T.; Chao, P.-S.; Wu, C.-S.; Shih, S.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
Fabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymer
|
Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Hsieh, K.-H.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold
|
Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Chang, J.-H.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
A novel method for rapid fabrication of microlens arrays using micro-transfer molding with soft mold
|
Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Jeng, T.-M.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:24Z |
Fabrication of buried waveguide microstructure using gas-assisted micro/nanoimprinting with soft mold
|
Weng, Y.-J.; Yang, S.-Y.; Weng, Y.-C.; Wang, L.A.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:24Z |
Fabrication of optical waveguide devices using gas-assisted UV micro/nanoimprinting with soft mold
|
Weng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Wang, L.A.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:24Z |
A study on the innovative microlens projection lithography applied to the production of microstructures
|
SEN-YEU YANG; Weng, Y.-J.; Yang, S.-Y.; Wu, M.-S.; Weng, Y.-C.; Wang, L.A. |
| 臺大學術典藏 |
2020-01-13T08:23:24Z |
Fabrication of plastic microlens arrays using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film resist
|
Jiang, L.-T.; Huang, T.-C.; Chiu, C.-R.; Chang, C.-Y.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:23Z |
Polymer-ridge waveguide fabrication by gas-assisted UV embossing with a soft mold
|
Cheng, F.-S.; Huang, P.-Y.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:23Z |
Replication of microlens arrays by gas-assisted hot embossing
|
Hocheng, H.; Wen, T.-T.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:23Z |
Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platform
|
Yang, S.-Y.; Cheng, F.-S.; Xu, S.-W.; Huang, P.-H.; Huang, T.-C.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:23Z |
Novel hydrostatic pressuring mechanism for soft UV-imprinting processes
|
Cheng, F.-S.; Yang, S.-Y.; Chen, C.-C.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:23Z |
CO2-assisted embossing for the fabrication of PMMA components under low temperature and with low pressure
|
Yang, S.-Y.; Huang, T.-C.; Ciou, J.-K.; Chan, B.-D.; Loeser, J.G.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:22Z |
Large-area and thin light guide plates fabricated using UV-based imprinting
|
Huang, P.-H.; Huang, T.-C.; Sun, Y.-T.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:22Z |
Development and research for applying innovative magnetic soft mold imprinting techniques in microstructure component manufacturing
|
Weng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:22Z |
Improving flow balance during filling a multi-cavity mold with modified runner systems
|
Huang, T.-C.; Huang, P.-H.; Yang, S.-Y.; Ko, T.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:21Z |
Thin-film patterns directly fabricated using a transfer stamping technique
|
Chan, B.-D.; Hsieh, K.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:21Z |
Development of nanoparticle fluid imprinting technology in microstructure manufacture
|
Weng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:21Z |
Study on the formation defect of nano imprinted optical waveguide devices and nano-indentation detection
|
Weng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Wong, J.-L.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:21Z |
A Study of an innovative technology for manufacturing optical waveguides based on vacuum-assisted micromolding
|
Huang, J.-C.; Fang, H.-S.; Wong, Y.-C.; SEN-YEU YANG; Yang, S.-Y.; Weng, Y.-C.; Weng, Y.-J. |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
Fabrication of optical waveguide devices using electromagnetic assisted nanoimprinting
|
Weng, Y.-J.; Weng, Y.-C.; Wong, Y.-C.; Yang, S.-Y.; Liu, H.-K.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
Fabrication of microlens arrays by using nano-particle fluid imprinting technology
|
Weng, Y.-J.; Weng, Y.-C.; Huang, J.-C.; Wong, Y.-C.; Yang, S.-Y.; Liu, H.-K.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
Gas-assisted nanoparticle fluid magnetic imprinting technology in micro-lens manufacture and the application of projection lithography
|
Weng, Y.-J.; Weng, Y.-C.; Fang, H.-S.; Ke, C.-Y.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
A novel electromagnetism-assisted imprinting technology to replicate microstructures onto a large-area curved surface using a flexible magnetic mold
|
Weng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Wong, J.-L.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
Fabrication of microlens arrays using a CO2-assisted embossing technique
|
Huang, T.-C.; Chan, B.-D.; Ciou, J.-K.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:19Z |
Complete reversal imprinting for fabricating microlens arrays with faithful shape replication
|
Huang, P.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:19Z |
Application of vacuum-assisted filling system with ultraviolet-light- emitting diode array to fabrication of waveguide microstructures
|
Weng, Y.J.; Weng, Y.C.; Fang, H.S.; Yang, S.Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:19Z |
Fabricating nanostructures by atomic force microscopy
|
Huang, J.-C.; Weng, Y.-J.; Yang, S.-Y.; Weng, Y.-C.; Wang, J.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:19Z |
A novel magnetic nickel mold combined nano-particle fluid electromagnetism imprinting on replicating microstructures
|
Weng, Y.-J.; Weng, Y.-C.; Wong, Y.-C.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:18Z |
Application of an innovative process technology for phase shift mask in near-field phase shift lithography
|
Hsu, H.-Y.; Weng, Y.-J.; Huang, J.-T.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:18Z |
Applying magnetic soft mold imprint technology with ultraviolet light-emitting-diode array on the fabrication of microlens arrays
|
Weng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:18Z |
A study on application of making porous micro-structural aluminum oxide template by anodic aluminum oxide processing technology in cell reproduction
|
Weng, Y.J.; Huang, J.C.; Weng, Y.C.; Wong, Y.C.; Liu, H.K.; Yang, S.Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:18Z |
Production of bioenergy via the combined processes using radio-frequency plasma and catalysts
|
Tu, W.-K.; Chang, C.-Y.; Lin, C.-F.; Shie, J.-L.; Chang, C.-F.; Kuo, J.T.; Yang, S.-Y.; Hsi, C.-L.; Shaw, D.-G.; Lee, D.-J.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:17Z |
Development of a non-uniform heating system for micro hot embossing
|
Yang, C.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:17Z |
A high-brightness light guide plate with high precise double-sided microstructures fabricated using the fixed boundary hot embossing technique
|
Yang, C.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:17Z |
CO2-assisted thermal fusion bonding of heterogeneous materials by use of surface nano-pillars
|
Yao, T.-F.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:17Z |
The application of elastic auxiliary air bag imprinting technology to the development of linear gradient micro-structure replication processes
|
Weng, Y.-C.; Weng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:17Z |
Bubble-free replication of large area microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuuming
|
Huang, P.-H.; Chen, H.-M.; Huang, T.-C.; Yang, S.-Y.; Sun, Y.-T.; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:16Z |
Novel real-time temperature diagnosis of conventional hot-embossing process using an ultrasonic transducer
|
Cheng, C.-C.; Yang, S.-Y.; Lee, D.; SEN-YEU YANG |
