| 國立臺灣科技大學 |
2017 |
Theoretical prediction of pullout strengths for dental and orthopaedic screws with conical profile and buttress threads
|
Shih, K.-S.;Hou, S.-M.;Lin, S.-C. |
| 國立臺灣科技大學 |
2016 |
Biomechanical comparison between concentrated, follower, and muscular loads of the lumbar column
|
Shih, K.-S;Weng, P.-W;Lin, S.-C;Chen, Y.-T;Cheng, Cheng C.-K;Lee, C.-H. |
| 國立臺灣科技大學 |
2015 |
Comparison of the bending performance of solid and cannulated spinal pedicle screws using finite element analyses and biomechanical tests
|
Shih, K.-S.;Hsu, C.-C.;Hou, S.-M.;Yu, S.-C.;Liaw, C.-K. |
| 國立臺灣科技大學 |
2015 |
Biomechanical investigation of pedicle screw-based posterior stabilization systems for the treatment of lumbar degenerative disc disease using finite element analyses
|
Shih, K.-S.;Hsu, C.-C.;Zhou, S.-Y.;Hou, S.-M. |
| 國立臺灣科技大學 |
2014 |
Biomechanical analyses of static and dynamic fixation techniques of retrograde interlocking femoral nailing using nonlinear finite element methods
|
Shih, K.-S.;Hsu, C.-C.;Hsu, T.-P.;Hou, S.-M.;Liaw, C.-K. |
| 國立臺灣科技大學 |
2014 |
Simulation-based particle swarm optimization and mechanical validation of screw position and number for the fixation stability of a femoral locking compression plate
|
Lee, C.-H.;Shih, K.-S.;Hsu, C.-C.;Cho, T. |
| 國立臺灣科技大學 |
2014 |
Predicting 3D pose in partially overlapped X-ray images of knee prostheses using model-based Roentgen stereophotogrammetric analysis (RSA)
|
Hsu, C.-P.;Lin, S.-C.;Shih, K.-S.;Huang, C.-H.;Lee, C.-H. |
| 國立臺灣科技大學 |
2013 |
Arrangement of joint distraction and hinge alignment during elbow dynamization using an arthrodiatasis fixator
|
Lee, W.-S.;Tan, C.-H.;Lin, S.-C.;Chen, Y.-J.;Chao, C.-K.;Shih, K.-S. |
| 國立成功大學 |
2012-03 |
Novel adaptive fuzzy neural network controller for a class of uncertain non-linear systems
|
Shih, K. S.; Li, T. H. S.; Tsai, S. H. |
| 國立臺灣科技大學 |
2012 |
Improvement in the clinical practicability of roentgen stereophotogrammetric analysis (RSA): Free from the use of the dual X-ray equipment
|
Shih, K.-S.;Lee, C.-H.;Syu, C.-B.;Lai, J.-Y.;Chen, K.-J.;Lin, S.-C. |
| 國立臺灣科技大學 |
2012 |
Analysis of splinted and non-splinted prostheses in a posterior mandible
|
Lee, W.-C.;Su, C.-Y.;Shih, K.-S. |
| 國立臺灣科技大學 |
2012 |
Rapid prototyping mandible model for dental implant surgery simulation
|
Cheng, Y.-L.;Lin, Y.-T.;Shih, K.-S. |
| 國立臺灣科技大學 |
2012 |
Improved execution efficiency of model-based roentgen stereophotogrammetric analysis: Simplification and segmentation of model meshes
|
Syu, C.-B.;Lin, S.-C.;Huang, C.-Y.;Lai, J.-Y.;Shih, K.-S.;Chen, K.-J. |
| 國立臺灣科技大學 |
2012 |
Automatic model-based roentgen stereophotogrammetric analysis (RSA) of total knee prostheses
|
Syu, C.-B.; Lai, J.-Y.; Chang, R.-Y.; Shih, K.-S.; Chen, K.-J.; Lin, S.-C. |
| 元智大學 |
2011-06 |
Real-time gait cycle parameters recognition using a wearable motion detector
|
Yang, C. C; Hsu Y.-L.; Shih, K. S; Lu, J. M.; Chan, L. |
| 元智大學 |
2011-06 |
Real-time gait cycle parameters recognition using a wearable motion detector
|
Yang, C. C.; Hsu Y.-L.; Shih, K. S.; Lu, J. M.; Chan, L. |
| 國立臺灣科技大學 |
2010 |
Kinematic study of an innovative dynamic bridging wrist external fixator with arthrodiatasis
|
Shih K.-S.; Lin S.-C.; Liu Y.-H.; Chang T.-H.; Hou S.-M.; Lu T.-W. |
| 國立臺灣科技大學 |
2010 |
Analysis of the concentric distraction and distraction loss of the bridged elbow by a dynamic fixator
|
Shih K.-S.; Lee W.-S.; Tseng C.-S.; Lu T.-W.; Hou S.-M.; Lin S.-C. |
| 國立臺灣科技大學 |
2010 |
Crystallization kinetics and structure of poly(trimethylene terepthalate)/monolayer nano-mica nanocomposites
|
Khan A.N.; Hong P.-D.; Chuang W.-T.; Shih K.-S. |
| 國立臺灣科技大學 |
2010 |
Biomechanical influences of pin placement and elbow angle on hinge alignment and joint distraction of bridged elbow-pin-fixator construct
|
Shih, K.S.;Lin, S.C.;Chao, C.K.;Lee, W.S.;Lu, T.W.;Hou, S.M. |
| 國立臺灣大學 |
2010 |
KINEMATIC STUDY OF AN INNOVATIVE DYNAMIC BRIDGING WRIST EXTERNAL FIXATOR WITH ARTHRODIATASIS
|
Shih, K.-S.; Lin, S.-C.; Liu, Y.-H.; Chang, T.-H.; Hou, S.-M.; Lu, T.-W. |
| 國立臺灣科技大學 |
2009 |
Effect of mixed solvent on solution properties and gelation behavior of poly(vinyl alcohol)
|
Hong S.-J.; Hong P.-D.; Chen J.-C.; Shih K.-S. |
| 國立臺灣科技大學 |
2009 |
Effect of uniaxial drawing on the structure and glass transition behavior of poly(trimethylene 2,6-naphthalate)/layered clay nanocomposites
|
Khan A.N.; Hong P.-D.; Chuang W.-T.; Shih K.-S. |
| 國立臺灣大學 |
2008 |
Biomechanical Analysis of Nonconstrained and Semiconstrained Total Elbow Replacements: A Preliminary Report
|
Shih, K.-S.; Lu, T.-W.; Fu, Y.-C.; Hou, S.-M.; Sun, J.-S.; Cheng, C.-Y. |
| 國立臺灣科技大學 |
2007 |
Influence of jig design on biomechanical evaluation of spinal construct stability
|
Lin, S.-C.;Lee, W.-S.;Ma, J.-L.;Shih, K.-S.;Mudgal, C.S. |
