| 臺大學術典藏 |
2009 |
Analyses of steady-state interface fracture of elastic multilayered beams under four-point bending
|
WEI-HSING TUAN; Wei, W.C.J.; Tuan, W.H.; Hsueh, C.H. |
| 臺大學術典藏 |
2009 |
Melting and interface reaction of Mn-Si-O glass on BaTiO3
|
Lin, J.C.C.; Wei, W.C.J.; WEN-CHENG J. WEI |
| 國立臺灣大學 |
2008-11 |
Atomistic calculations of lattice constants of mullite with its compositions
|
Chen, J. C.; Chen, C. S.; Schneider, H.; Chou, C. C.; Wei, W. C. J. |
| 國立臺灣大學 |
2007-11 |
Homogeneity of aqueous Al2O3/3Y-TZP feedstock by plastic kneading
|
Wei, W.C.J.; Weng, M. T. |
| 國立臺灣大學 |
2007-01 |
Adsorption of PAA on the alpha-Al2O3 surface
|
Chen, H. Y. T.; Wei, W. C. J.; Hsu, K. C.; Chen, C. S. |
| 國立臺灣大學 |
2007 |
Synthesis and reaction kinetics for monodispersive Y2O3:Tb3+ spherical phosphor particles
|
Sung, J.M.; Lin, S.E.; Wei, W.C.J. |
| 國立臺灣大學 |
2007 |
Adsorption of PAA on the a-Al2O3 Surface
|
Chen, H. Y. T.; Wei, W. C. J.; Hsu, K. C.; Chen, C. S. |
| 國立臺灣大學 |
2007 |
Sintering Kinetic of fine? a-alumina powder with ZrO2 impurity
|
Lin C. C.; Wei, W. C. J. |
| 國立臺灣大學 |
2007 |
Preparation and characterization of cerium hydrate fiber
|
Sung, J. M.; Wei, W. C. J. |
| 國立臺灣大學 |
2007 |
Influence of 3Y-TZP on microstructure and mechanical properties of Al2O3-based composite
|
Weng, M. T.; Wei, W. C. J.; Huang, C. Y. |
| 國立臺灣大學 |
2007 |
Investigation of YSZ thin films on silicon wafer and NiO/YSZ deposited by ion beam sputtering deposition (IBSD)
|
Chen, Y. J.; Wei, W.C.J. |
| 臺大學術典藏 |
2007 |
Adsorption of PAA on the α-Al2O3 surface
|
Chen, H.Y.T.; Wei, W.C.J.; Hsu, K.C.; Chen, C.S.; WEN-CHENG J. WEI |
| 國立臺灣大學 |
2006-05 |
Colloidal processing of Pb(Zr,Ti)O3 targets part II - Effect of NbO2.5 additive
|
Meng, C.H.; Wei, W.C.J.; Shieh, J.; Chen, C.S. |
| 國立臺灣大學 |
2006 |
Controlled nano-oxide layer coating on fine particles with multiple optical-electrical function
|
Wei, W.C.J.; Yu, B. Y.; Li, J. F.; Chen, C. S. |
| 國立臺灣大學 |
2006 |
Kneading and Molding of Ceramic Microparts by Precision Powder Injection Molding (PIM)
|
Yang, S. Y.; Huang, C. K.; Lin, B. C.; Wei, W. C. J. |
| 國立臺灣大學 |
2006 |
Processing and Property Improvement of Polymeric Composites with Added ZnO Nanoparticles through Microinjection Molding
|
Huang, C. K.; Chen, S. W.; Wei, W. C. J. |
| 國立臺灣大學 |
2006 |
Praseodymium-Doped Photo-Luminescent Strontium Indate Nanoparticles by Ultrasonic Spray Pyrolysis
|
Lin, S.E.; Borgohain, K.; Wei, W. C. J. |
| 國立臺灣大學 |
2006 |
Colloidal processing of PbO3 targets Part 2 - Effect of NbO2.5 additive
|
Meng, C.H.; Wei, W.C.J.; Shieh, J.; Chen, C.S. |
| 國立臺灣大學 |
2005-12 |
La2O3/Al2O3/B2O3 based glass-ceramics for LTCC application
|
Wei, W. C. J.; Chen, C. L.; Roosen, A. |
| 國立臺灣大學 |
2005-12 |
Processing and characterization of La2O3-SiO2-B2O3 (LSB) based glass-ceramics for LTCC application
|
Lee, Y. H. A.; Wei, W. C. J. |
| 國立臺灣大學 |
2005 |
Synthesis and characterization of monodispersive In2O3 particles
|
Lin, S. E.; Wei, W. C. J. |
| 臺大學術典藏 |
2005 |
Dispersion properties of RaTiO3 colloids with amphoteric polyelectrolytes
|
Hsu, K. C.; Ying, K. L.; Chen, L. P.; Yu, B. Y.; Wei, W. C. J.; WEN-CHENG J. WEI |