|
"wu s k"的相关文件
显示项目 226-275 / 495 (共10页) << < 1 2 3 4 5 6 7 8 9 10 > >> 每页显示[10|25|50]项目
| 臺大學術典藏 |
2018-09-10T03:44:30Z |
The tensile properties of a textured Ti65Al25Nb10 alloy
|
SHYI-KAAN WU; Koo, C.H.; Wu, S.K.; Hon, W.P.; SHYI-KAAN WU;Koo, C.H.;Wu, S.K.;Hon, W.P.;SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:44:28Z |
Phenomenological analysis of martensitic transformation in cold-rolled TiNi-base shape memory alloys
|
Wu, S.K.; Lin, H.C.; Chen, S.H.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:44:28Z |
Interfacial microstructures of rf-sputtered TiNi shape memory alloy thin films on (100) silicon
|
Wu, S.K.; Chen, J.Z.; Wu, Y.J.; Wang, J.Y.; Yu, M.N.; Chen, F.R.; Kai, J.J.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:35Z |
A comparison of the cavitation erosion resistance of TiNi alloys, SUS304 stainless steel and Ni-based self-fluxing alloy
|
SHYI-KAAN WU;Yeh, C.H.;Lin, H.C.;Wu, S.K.;SHYI-KAAN WU; Wu, S.K.; Lin, H.C.; Yeh, C.H.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:35Z |
Transformation heat as a function of ternary Pd additions in Ti50Ni50-zPdz alloys with x:20?50 at.%
|
SHYI-KAAN WU;Wayman, C.M.;Wu, S.K.;Lo, Y.C.;SHYI-KAAN WU; Lo, Y.C.; Wu, S.K.; Wayman, C.M.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:35Z |
Orientation relationships between γ plates and α2 matrix in a Ti-39 at.%Al alloy
|
Yang, Y.S.; Wu, S.K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:35Z |
A study of electrical resistivity, internal friction and shear modulus on an aged Ti49Ni51 alloy
|
SHYI-KAAN WU;Chou, T.S.;Lin, H.C.;Wu, S.K.;SHYI-KAAN WU; Wu, S.K.; Lin, H.C.; Chou, T.S.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:34Z |
Interface of sputter-deposited TiNi thin film on (100) Si wafer
|
Wu, S.K.; Wang, J.Y.; Wu, I.J.; Lin, H.C.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:34Z |
DC plasma-polymerized hexamethyldisilazane coatings of an equiatomic TiNi shape memory alloy
|
SHYI-KAAN WU;Wu, S.K.;Yang, M.-R.;SHYI-KAAN WU; Yang, M.-R.; Wu, S.K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:34Z |
Characterization of internal friction of Fe-30Mn-6Si-5Cr
|
SHYI-KAAN WU;Wu, S.K.;Lin, K.M.;Lin, H.C.;Chou, T.S.;SHYI-KAAN WU; Chou, T.S.; Lin, H.C.; Lin, K.M.; Wu, S.K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:34Z |
An investigation of unbalanced-magnetron sputtered TiAlN films on SKH51 high-speed steel
|
SHYI-KAAN WU;Liu, P.L.;Lin, H.C.;Wu, S.K.;SHYI-KAAN WU; Wu, S.K.; Lin, H.C.; Liu, P.L.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:33Z |
Oxidation behavior and oxide layers of Ti-50Al intermetallics by preoxidation in high-pressure oxygen
|
Yang, M.-R.; Wu, S.K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:33Z |
Martensitic transformation of quaternary Ti50.5-XNi49.5ZrX/2HfX/2 (X = 0-20 at.%) shape memory alloys
|
SHYI-KAAN WU;Wu, S.K.;Hsieh, S.F.;SHYI-KAAN WU; Hsieh, S.F.; Wu, S.K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:33Z |
Martensitic transformation of a Ti-rich Ti40.5Ni49.5Zr10 shape memory alloy
|
SHYI-KAAN WU;Hsieh, S.F.;Wu, S.K.;SHYI-KAAN WU; Wu, S.K.; Hsieh, S.F.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:33Z |
Lattice parameters of martensite in Ti50.5-xNi49.5Zrx/2Hfx/2 quaternary shape memory alloys
|
Wu, S.K.; SHYI-KAAN WU; SHYI-KAAN WU;Wu, S.K.;Hsieh, S.F.;SHYI-KAAN WU; Hsieh, S.F. |
| 臺大學術典藏 |
2018-09-10T03:26:33Z |
Microstructural evolution at the bonding interface during the early-stage infrared active brazing of alumina
|
SHYI-KAAN WU;Wang, J.Y.;Hu, J.M.;Wu, S.K.;Shiue, R.K.;SHYI-KAAN WU; Shiue, R.K.; Wu, S.K.; Hu, J.M.; Wang, J.Y.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:32Z |
Wire drawing conducted in the R-phase of TiNi shape memory alloys
|
SHYI-KAAN WU; Wu, S.K.; Lin, H.C.; Yen, Y.C.; Chen, J.C.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:32Z |
Recent development of TiNi-based shape memory alloys in Taiwan
|
Wu, S.K.; Lin, H.C.; SHYI-KAAN WU |
| 臺大學術典藏 |
2018-09-10T03:26:32Z |
Oxidation resistance improvement of Ti-50Al intermetallics by pre-oxidizing and subsequent polishing
|
Yang, M.-R.; Wu, S.K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2015 |
Targeting microbubbles-carrying TGFβ1 inhibitor combined with ultrasound sonication induce BBB/BTB disruption to enhance nanomedicine treatment for brain tumors
|
Chen Y.-C.; Chiang C.-F.; Wu S.-K.; Chen L.-F.; Hsieh W.-Y.; Win-Li Lin |
| 國立成功大學 |
2014-07 |
Postural sway and perception of affordances in children at risk for developmental coordination disorder
|
Chen, F. C.; Tsai, C. L.; Wu, S. K. |
| 臺大學術典藏 |
2014 |
Fabrication of porous Ti-rich Ti51Ni49 by evaporating NaCl space holder
|
Yen, F.-C.; Hwang, K.-S.; Wu, S.-K.; SHYI-KAAN WU |
| 臺大學術典藏 |
2014 |
Processes affecting the depth of the gas hydrate stability zone in the accretionary prism offshore Taiwan
|
Chi, W.-C. et al.; SAULWOOD LIN; Chi, W.-C.; Lin, Y.-S.; Berndt, C.; Wu, S.-K.; Crutchley, G.; Chen, L.; Liu, C.-S.; Shyu, C.-T.; Chiang, H.-T.; Lin, S.; Han, W.-C.; Hsu, H.-H.; Peng, Y.-S.; Wang, Y. |
| 國立臺灣科技大學 |
2013 |
Performance of remote target pointing hand movements in a 3D environment
|
Lee, Y.-H.;Wu, S.-K.;Liu, Y.-P. |
| 臺大學術典藏 |
2013 |
A study of the structure of G-P zones in Ti-rich TiNi shape memory melt-spun ribbons
|
SHYI-KAAN WU;Wu, S.-K.;Chen, C.-H.;Cheng, S.-Y.;SHYI-KAAN WU; Cheng, S.-Y.; Chen, C.-H.; Wu, S.-K.; SHYI-KAAN WU |
| 國立臺灣大學 |
2012 |
Effects of cold rolling and solid solution treatments on mechanical properties of beta-phase Mg-14.3Li-0.8Zn alloy
|
Wu, S.K.; Wang, J.Y.; Lin, K.C.; Bor, H.Y. |
| 國立臺灣大學 |
2012 |
Interfacial Reaction and Wettability of 72Ag-28Cu Braze on CP-Ti Substrate Using Infrared Heating
|
Shiue, R.K.; Wu, S.K.; Chen, F.Y.; Yang, T.E. |
| 臺大學術典藏 |
2012 |
Damping properties of homogenized and cold-rolled Mg14.3Li0.8Zn β-phase magnesium alloy
|
SHYI-KAAN WU; Bor, H.-Y.; Lin, K.-C.; Li, Y.-H.; Wu, S.-K.; Chang, S.-H. |
| 國立臺灣大學 |
2011 |
Anomalous transport and thermal properties of NiTi and with Cu and Fe-doped shape memory alloys near the martensitic transition
|
Ingale, B.D.; Wei, W.C.; Chang, P.C.; Kuo, Y.K.; Wu, S.K. |
| 國立臺灣大學 |
2011 |
Low-frequency damping properties of as-extruded Mg-11.2Li-0.95Al-0.43Zn magnesium alloy
|
Wu, S.K.; Chang, S.H.; Tsia, W.L.; Bor, H.Y. |
| 國立臺灣大學 |
2011 |
Crystallization temperature and activation energy of as-spun Ti52.0Ni38.5Cu9.5 ribbon
|
Chang, K.H.; Wu, S.K.; Chang, S.H. |
| 國立臺灣大學 |
2011 |
Low-frequency damping properties of eutectic Sn-Bi and In-Sn solders
|
Chang, S.H.; Wu, S.K. |
| 國立臺灣大學 |
2010-12 |
Multi-stage Transformation in Annealed Ni-rich Ti49Ni41Cu10 Shape Memory Alloy
|
Wu, S.K.; Lin, K. N. |
| 國立臺灣大學 |
2010-12 |
Infrared Brazing Fe3Al Intermetallics Using the Cu Filler Metal
|
Li, Y.; Shiue, R. K.; Wu, S.K.; Wu, L. M. |
| 國立臺灣大學 |
2010-12 |
Strong Bonding of Infrared Brazed α2-Ti3Al and Ti-6Al-4V using Ti-Cu-Ni Fillers
|
Shiue, R. K.; Chen, Y. T.; Wu, S.K. |
| 國立臺灣大學 |
2010-12 |
Martensitic Transformation of Ni64Al34Re2 Shape Memory Alloy
|
Kang, H. J.; Wu, L. M.; Wu, S. K. |
| 國立臺灣大學 |
2010 |
Damping characteristics of Sn-3Ag-0.5Cu and Sn-37Pb solders studied by dynamic mechanical analysis
|
Chang, S.H.; Wu, S.K. |
| 國立臺灣大學 |
2010 |
Shape memory characteristics of as-spun and annealed Ti51Ni49 crystalline ribbons
|
Chang, S.H.; Wu, S.K.; Wu, L.M. |
| 國立臺灣大學 |
2010 |
Damping characteristics of the Ti-rich TiNi melt-spun ribbon measured by using a dynamic mechanical analyzer
|
Chang, S.H.; Chen, T.H.; Wu, S.K.; Lin, K.N. |
| 臺大學術典藏 |
2010 |
Strong bonding of infrared brazed α2-Ti3Al and Ti-6Al-4V using Ti-Cu-Ni fillers
|
Wu, S.K.;Chen, Y. T.;SHYI-KAAN WU;Shiue, R. K.;Chen, Y.T.;Wu, S.K.;Shiue, R.K.;Wu, S.K.;Chen, Y. T.;Shiue, R. K.;Wu, S.K.;Chen, Y. T.;SHYI-KAAN WU;Shiue, R. K.; Shiue, R. K.; Chen, Y. T.; Wu, S.K.; Shiue, R.K.; Wu, S.K.; Chen, Y.T.; Shiue, R. K.; SHYI-KAAN WU; Chen, Y. T.; Wu, S.K. |
| 臺大學術典藏 |
2010 |
Shape memory characteristics of as-spun and annealed Ti51Ni49 crystalline ribbons
|
Chang, S.H.; Wu, S.K.; Wu, L.M.; Chang, S.H.; SHYI-KAAN WU; Wu, S.K.; Wu, L.M.; Wu, L.M.;Wu, S.K.;SHYI-KAAN WU;Chang, S.H.;Wu, L.M.;Wu, S.K.;Chang, S.H.;Wu, L.M.;Wu, S.K.;SHYI-KAAN WU;Chang, S.H. |
| 國立臺灣大學 |
2009-12 |
Cold-Rolling Effect on Damping Capacity of High-Temperature Damping Background for AZ80 Magnesium Alloy
|
Chang, S. H.; Wu, S. K.; Wang, J. Y.; Tsai, W. L. |
| 國立臺灣大學 |
2009-12 |
Martensitic Transformation of Ti50Ni25-XPd25-YCuX+Y Quaternary Shape Memory Alloys with Y, Y≦10 at. %
|
Lin, K. N.; Wu, L. M.; Wu, S. K. |
| 國立臺灣大學 |
2009-12 |
Martensitic Transformation of Cold-Rolled and Annealed Ti50Ni40Cu10 Shape Memory Alloy
|
Lin, K. N.; Wu, L. M.; Wu, S. K. |
| 國立臺灣大學 |
2009-11 |
Martensitic Transformation Temperatures of Ti50Ni50 Shape Memory Alloy Measured from Strain Variation in Dynamic Mechanical Analysis Test
|
Chang, S. H.; Wu, S. K. |
| 國立臺灣大學 |
2009-04 |
Oxidation Behavior of Ti50Ni40Cu10 Shape-Memory Alloy in 700–1,000 °C Air Environment
|
Lin, K.N.; Wu, S.K. |
| 國立臺灣大學 |
2009-03 |
Surface analyses and biocompatibility study of 500 °C oxidized Ni50Ti50 and Ni40Ti50Cu10 shape memory alloys
|
Chen, Ming-Chuan; Wu, S.K. |
| 國立東華大學 |
2009-01 |
Investigation of the Photo-Catalytic Coating on AZ91 Alloy
|
Wong,M.S.; Tsai,H.J.; Uan,J.Y.; Wang,J.Y.; Wu,S.K. |
| 國立臺灣大學 |
2009-01 |
Investigation of the Photo-Catalytic Coating on AZ91 Alloy
|
Wang, J.Y.; Tsai, H.J.; Uan, J.Y.; Wong, M.S.; Wu, S.K. |
| 國立東華大學 |
2009 |
Cold-rolling effect on damping capacity of high-temperature damping background for AZ80 magnesium alloy
|
Wang,Jian-Yih; Chang,S.H.; Tsai,W.L.; Wu,S.K. |
显示项目 226-275 / 495 (共10页) << < 1 2 3 4 5 6 7 8 9 10 > >> 每页显示[10|25|50]项目
|