|
"wu s k"的相關文件
顯示項目 291-315 / 495 (共20頁)
<< < 7 8 9 10 11 12 13 14 15 16 > >>
每頁顯示[10|25|50]項目
| 國立臺灣大學 |
2008 |
Hydride reorientation in Zircaloy-4 cladding
|
Chu, H.C.; Wu, S.K.; Kuo, R.C. |
| 國立臺灣大學 |
2008 |
Infrared brazing of Ti50Al50 and Ti-6Al-4V using two Ti-based filler metals
|
Shiue, R.K.; Wu, S.K.; Chen, Y.T.; Shiue, C.Y. |
| 國立臺灣大學 |
2008 |
Low-frequency damping properties of near-stoichiometric Ni2MnGa shape memory alloys under isothermal conditions
|
Chang, S.H.; Wu, S.K. |
| 國立臺灣大學 |
2008 |
Martensitic transformation of annealed Ti50Ni25Cu25 melt-spun ribbons
|
Chang, S.H.; Wu, S.K.; Kimura, H. |
| 國立臺灣大學 |
2008 |
Origin of three-stage transformation in a severely cold-rolled and annealed Ti51Ni40Cu9 shape memory alloy
|
Lin, K.N.; Wu, S.K. |
| 國立臺灣大學 |
2008 |
Effect of cooling rate on transformation temperature measurements of Ti50Ni50 alloy by differential scanning calorimetry and dynamic mechanical analysis
|
Chang, S.H.; Wu, S.K. |
| 國立臺灣大學 |
2008 |
Infrared brazing of Ti?6Al?4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)
|
Shiue, R. K.; Wu, S. K.; Shiue, J.Y. |
| 國立臺灣大學 |
2008 |
Infrared brazing of Ti50Al50 and Ti?6Al?4V using two Ti-based filler metals
|
Shiue, R. K.; Wu, S. K.; Chen, Y.T.; Shiue, C.Y. |
| 臺大學術典藏 |
2008 |
Infrared brazing of Ti?6Al?4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)
|
WuSK; ShiueRK; Shiue, J.Y.; Wu, S. K.; Shiue, R. K.; Shiue, R. K.; Wu, S. K.; Shiue, J.Y. |
| 臺大學術典藏 |
2008 |
Infrared brazing of Ti50Al50 and Ti?6Al?4V using two Ti-based filler metals
|
WuSK; ShiueRK; Shiue, C.Y.; Chen, Y.T.; Wu, S. K.; Shiue, R. K.; Shiue, R. K.; Wu, S. K.; Chen, Y.T.; Shiue, C.Y. |
| 國立臺灣大學 |
2007-11 |
Effect of radial hydrides on the axial and hoop mechanical properties of Zircaloy-4 cladding
|
Chu, H. C.; Wu, S. K.; Chien, K. F.; Kuo, R. C. |
| 國立臺灣大學 |
2007-11 |
Immobilized heparin onto TiNi shape memory alloy modified with acrylamide by UV-Induced grafting
|
Chen, C. H.; Yang, M. R.; Wu, S. K. |
| 國立臺灣大學 |
2007-11 |
The Improvement of High-Temperature Oxidation of α2-Ti3Al by Anodic Coating in the Phosphoric Acid with Sodium Silicate
|
Wu, S.K.; You, J.R.; Yang, Mu-Rong |
| 國立臺灣大學 |
2007-11 |
Internal friction of B2 -> B19 ’ martensitic transformation of Ti50Ni50 shape memory alloy under isothermal conditions
|
Chang, S. H.; Wu, S. K. |
| 國立臺灣大學 |
2007-11 |
Internal friction of R-phase and B19 ’ martensite in equiatomic TiNi shape memory alloy under isothermal conditions
|
Chang, S. H.; Wu, S. K. |
| 國立臺灣大學 |
2007-07 |
Annealing Effect on Martensitic Transformation of Severely Cold-Rolled Ti50Ni40Cu10 Shape Memory Alloy
|
Wu, S. K.; Lin, K. N. |
| 國立臺灣大學 |
2007-01 |
Inherent Internal Friction of Ti51Ni39Cu10 Shape Memory Alloy
|
Wu, S.K.; Chang, S.H. |
| 國立臺灣大學 |
2007-01 |
Effect of Radial Hydrides on the Axial and Hoop Mechanical Properties of Zircaloy-4 Cladding
|
Chu, H.C.; Wu, S.K.; Kuo, R.C.; Chien, K.F. |
| 國立東華大學 |
2007 |
Damping Characteristics of Severely Cold-rolled and Annealed AZ31 Alloy
|
Wang,J.Y.; Chang,S. H.; Wu,S. K. |
| 國立東華大學 |
2007 |
Investigation of the Surface Photo-catalytic Treatment of AZ91 Alloy
|
Wang,J.Y.; Tsai,H. J.; Uan,J. Y.; Wu,S. K. |
| 國立臺灣大學 |
2007 |
Internal friction of R-phase and B19′ martensite in equiatomic TiNi shape memory alloy under isothermal conditions
|
Chang, S.H.; Wu, S.K. |
| 國立臺灣大學 |
2007 |
Annealing effects on the crystallization and shape memory effect of Ti50Ni25Cu25 melt-spun ribbons
|
Chang, S.H.; Wu, S.K.; Kimura, H. |
| 國立臺灣大學 |
2007 |
Effect of radial hydrides on the axial and hoop mechanical properties of Zircaloy-4 cladding
|
Chu, H.C.; Wu, S.K.; Chien, K.F.; Kuo, R.C. |
| 國立臺灣大學 |
2007 |
Internal friction of B2 → B19′ martensitic transformation of Ti50Ni50 shape memory alloy under isothermal conditions
|
Chang, S.H.; Wu, S.K. |
| 國立臺灣大學 |
2007 |
Annealing effect on martensitic transformation of severely cold-rolled Ti50Ni40Cu10 shape memory alloy
|
Lin, K.N.; Wu, S.K. |
顯示項目 291-315 / 495 (共20頁)
<< < 7 8 9 10 11 12 13 14 15 16 > >>
每頁顯示[10|25|50]項目
|
