|
"yang c b"的相关文件
显示项目 1-25 / 25 (共1页)
1
每页显示[10|25|50]项目
| 臺大學術典藏 |
2020-01-17T07:43:57Z |
Structure and tribological behavior of (AlCrNbSiTiV)N film deposited using direct current magnetron sputtering and high power impulse magnetron sputtering
|
CHIA-CHI SUNG; Hsu, C.-Y.; Sung, C.-C.; Yang, C.-B.; Chang, C.-H. |
| 臺大學術典藏 |
2018-09-10T04:46:56Z |
Relationship of somatic cell count, physical, chemical and enzymatic properties to the bacterial standard plate count in different breeds of dairy goats
|
Ying, C.;Yang, C.-B.;Hsu, J.-T.; Ying, C.; Yang, C.-B.; Hsu, J.-T.; JIH-TAY HSU |
| 南亞技術學院 |
2014-03 |
Structural Properties of Ga-Doped ZnO Films Grown on Polymer Substrates
|
Wang, S.S.; Yang, C.B.; Shiou, F.J.; Hsu, C.Y. |
| 國立臺灣科技大學 |
2012 |
Effect of nickel annealing on GaN-based photodetectors
|
Chen, T.P.;Young, S.J.;Chang, S.J.;Wang, S.M.;Hsiao, C.H.;Huang, B.R.;Yang, C.B. |
| 國立臺灣科技大學 |
2012 |
Low-frequency noise characteristics of GaN Schottky barrier photodetectors prepared with nickel annealing
|
Chen, T.-P.;Young, S.-J.;Chang, S.-J.;Huang, B.-R.;Wang, S.-M.;Hsiao, C.-H.;Wu, S.-L.;Yang, C.-B. |
| 國立成功大學 |
2012 |
Effect of Nickel Annealing on GaN-Based Photodetectors
|
Chen, T. P.; Young, S. J.; Chang, S. J.; Wang, S. M.; Hsiao, C. H.; Huang, B. R.; Yang, C. B. |
| 南亞技術學院 |
2011-05 |
Curve fabrication model analysis of near-field photolithography
|
Lin, Z-C; Yang, C-B |
| 國立臺灣科技大學 |
2011 |
Establishment of a Near-Field Photolithography Processing Experiment Prediction Model and Parameter Optimization Model
|
Lin, Z.C.;Yang, C.B. |
| 國立臺灣科技大學 |
2011 |
Curve fabrication model analysis of near-field photolithography
|
Lin, Z.C.;Yang, C.B. |
| 國立臺灣科技大學 |
2011 |
Hot-melt-drawn Fabrication Model of Optical Fiber Probes and Analysis
|
Lin, Z.C.;Yang, C.B.;Lee, K.P. |
| 國立臺灣科技大學 |
2011 |
Theoretical model for the hot-melt-drawn fabrication of optical fibre probes and the analysis of fabrication parameters
|
Lin, Z.C.;Yang, C.B.;Lee, K.P. |
| 輔英科技大學 |
2010-02-01 |
An Algorithm and Applications to Sequence Alignment with Weighted Constraints
|
Peng, Y.H.;Yang, C.B.;Tseng, K.T. |
| 國立臺灣科技大學 |
2010 |
Combining the Taguchi method with an artificial neural network to construct a prediction model for near-field photolithography experiments
|
Lin Z.-C.; Yang C.-B. |
| 南亞技術學院 |
2010 |
Combining the Taguchi method with an artificial neural network to construct a prediction model for near-field photolithography experiments
|
Lin, Z-C; Yang, C-B |
| 國立臺灣科技大學 |
2009 |
Inverse model of fiber probe aperture size using a non-destructive method
|
Lin Z.-C.; Yang C.-B. |
| 國立臺灣科技大學 |
2009 |
Line segment fabrication model analysis of near-field photolithography
|
Lin Z.-C.; Yang C.-B. |
| 輔英科技大學 |
2007-10-01 |
The Better Alignment among Output Alignments
|
Tseng, K.T.;Yang, C.B.;Huang, K.S. |
| 國立臺灣大學 |
2007 |
Phycobiliproteins from Filamentous Cultures of Red Algae
|
Chou, H.-N.; Jeng, J.-M.; Yang, C.-B. |
| 國立臺灣大學 |
2006-12 |
Treatment and reuse of backwash water in Taipei Water Treatment Plant,Taiwan
|
Yang, C.B.; Cheng, Y.L.; Liu, J.C.; Lee, D.J. |
| 臺大學術典藏 |
2006-12 |
Treatment and reuse of backwash water in Taipei Water Treatment Plant,Taiwan
|
Lee, D.J.; Liu, J.C.; Cheng, Y.L.; Yang, C.B.; Yang, C.B.; Cheng, Y.L.; Liu, J.C.; Lee, D.J. |
| 國立臺灣科技大學 |
2006 |
Treatment and reuse of backwash water in Taipei water treatment plant, Taiwan
|
Yang, C.B.;Cheng, Y.L.;Liu, J.C.;Lee, D.J. |
| 國立臺灣科技大學 |
2006 |
Analysis of point fabrication model for near-field photolithography with experimental study
|
Lin, Z.-C.;Yang, C.-B. |
| 國立臺灣科技大學 |
1996 |
Evaluation of Machine Selection by the AHP Method
|
Lin, Z. C.;Yang, C. B. |
| 國立臺灣科技大學 |
1995 |
Economic evaluation of the planning of a flexible manufacturing system
|
Lin, Z. C.;Yang, C. B. |
| 國立臺灣科技大學 |
1995 |
The Expert System of Fixturing Design for Face Milling Using Modular Fixture
|
Lin, Z. C.;Yang, C. B. |
显示项目 1-25 / 25 (共1页)
1
每页显示[10|25|50]项目
|
