|
|
Taiwan Academic Institutional Repository >
Browse by Author
|
"yen jia yush"
Showing items 46-95 of 178 (4 Page(s) Totally)
1 2 3 4 > >>
View [10|25|50] records per page
| 國立臺灣大學 |
2011 |
Longitudinal stitching of sub-micron periodic fringes on a roller
|
Chen, Lien-Sheng; Yen, Jia-Yush; Chen, Yung-Pin; Wang, Lon A.; Chung, Tien-Tung; Lin, Hung-I; Chen, Ping-Hung; Chang, Shu-Hung |
| 國立臺灣大學 |
2011 |
Focal point tracking system for concentration solar power collection
|
Yeh, Pei-Ying; Yen, Po-Ching; Yen, Jia-Yush; Wu, Tsung-Tsong; Liu, Pei-Ling; Wu, Chia-Ling; Peng, Ching-Yu |
| 國立臺灣大學 |
2011 |
Silicon photodiodes for electron beam position and drift detection in scanning electron microscopy and electron beam lithography system
|
Kuo, Yi-Hung; Wu, Cheng-Ju; Yen, Jia-Yush; Chen, Sheng-Yung; Tsai, Kuen-Yu; Chen, Yung-Yaw |
| 國立臺灣大學 |
2011 |
In situ beam drift detection using a two-dimensional electron-beam position monitoring system for multiple-electron-beam-direct-write lithography
|
Chen, Sheng-Yung; Tsai, Kuen-Yu; Ng, Philip C.W.; Ng, Hoi-Tou; Liu, Chun-Hung; Shen, Yu-Tian; Kuan, Chieh-Hsiung; Chen, Yung-Yaw; Kuo, Yi-Hung; Wu, Cheng-Ju; Yen, Jia-Yush |
| 國立臺灣大學 |
2010-02 |
Robust Control Design for Vibration Isolation of an Electron Beam Projection Lithography System
|
Wang, Fu-Cheng; Hong, Min-Feng; Yen, Jia-Yush |
| 國立臺灣大學 |
2010 |
Comparison of sensor fusion methods for an SMA-based hexapod biomimetic robot
|
Liu, Shu-Hung; Huang, Tse-Shih; Yen, Jia-Yush |
| 國立臺灣大學 |
2010 |
Modified Frequency-Partitioned Spectrum Estimation for a Wireless Health Advanced Monitoring Bio-Diagnosis System
|
Tseng, Ching-En; Yen, Jia-Yush; Chang, Ming-Wei; Chang, Wei-Chien; Lee, Chih-Kung |
| 國立臺灣大學 |
2010 |
Novel Approach to Fuzzy-Wavelet ECG Signal Analysis for a Mobile Device
|
Tseng, Ching-En; Peng, Ching-Yu; Chang, Ming-Wei; Yen, Jia-Yush; Lee, Chih-Kung; Huang, Tse-Shih |
| 國立臺灣大學 |
2010 |
Tracking Control of Shape-Memory-Alloy Actuators Based on Self-Sensing Feedback and Inverse Hysteresis Compensation
|
Liu, Shu-Hung; Huang, Tse-Shih; Yen, Jia-Yush |
| 國立臺灣大學 |
2009-06 |
Research on three dimensional machining effects using atomic force microscope
|
Mao, Yao-Ting; Kuo, Kai-Chen; Tseng, Ching-En; Huang, Jian-Yin; Lai, Yi-Chih; Yen, Jia-Yush; Lee, Chih-Kung; Chuang, Wei-Li |
| 國立臺灣大學 |
2009-06 |
The Application of Disturbance Response Decoupling to the Vibration Control of an Electron Beam Lithography System
|
Wang, Fu-Cheng; Tsao, Yu-Chia; Yen, Jia-Yush |
| 臺大學術典藏 |
2009-05-06T05:54:34Z |
The Design of a Low Cost Motion Chair for Video Games and MPEG Video Playback
|
Huang, Chung-Hsi;Yen, Jia-Yush;Ouhyoung, Ming;Ouhyoung, Ming; Huang, Chung-Hsi; Yen, Jia-Yush; Ouhyoung, Ming; Ouhyoung, Ming |
| 臺大學術典藏 |
2009-01-21T08:59:27Z |
Quality Assurance of Engineering Education through Accreditation of Programs in Taiwan
|
Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yen, Jia-Yush; Yang, Yeong-Bin; Wei, Che-Ho; Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yen, Jia-Yush; Yang, Yeong-Bin; Wei, Che-Ho |
| 國立臺灣大學 |
2009 |
Vibration isolation of a full electron beam projection lithography system
|
Wang, Fu-Cheng; Hong, Min-Feng; Yen, Jia-Yush |
| 國立臺灣大學 |
2009 |
Robust PID Controller Design Using Particle Swarm Optimization
|
Lin, Liu-Hsu; Wang, Fu-Cheng; Yen, Jia-Yush |
| 國立臺灣大學 |
2009 |
Multivariable Fixed-Order Robust Control for a PEMFC System
|
Wang, Fu-Cheng; Chen, Hsuan-Tsung; Chou, Ming-Cheng; Yen, Jia-Yush |
| 臺大學術典藏 |
2009 |
Robust PID Controller Design Using Particle Swarm Optimization
|
Lin, Liu-Hsu;Wang, Fu-Cheng;Yen, Jia-Yush; Lin, Liu-Hsu; Wang, Fu-Cheng; Yen, Jia-Yush |
| 臺大學術典藏 |
2009 |
Multivariable Fixed-Order Robust Control for a PEMFC System
|
Yen, Jia-Yush; Chou, Ming-Cheng; Wang, Fu-Cheng;Chen, Hsuan-Tsung;Chou, Ming-Cheng;Yen, Jia-Yush; Wang, Fu-Cheng; Chen, Hsuan-Tsung |
| 臺大學術典藏 |
2008-11-05T06:19:49Z |
An analysis of the Fly-height characteristics in a magnetic tape drive
|
Jeng, Wen-Hong; Wang, Whei-Li; Chang, Jeng-Yeh; Yen, Jia-Yush; Yen, Jia-Yush; Chang, Jeng-Yeh; Wang, Whei-Li; Jeng, Wen-Hong; Yen, Jia-Yush;Chang, Jeng-Yeh;Wang, Whei-Li;Jeng, Wen-Hong |
| 臺大學術典藏 |
2008-11-05T06:18:43Z |
A decoupled path-following control algorithm based upon the decomposed trajectory error
|
Lu, Shui-Shong; Yen, Jia-Yush; Ho, Hsin-Chiang; Ho, Hsin-Chiang;Yen, Jia-Yush;Lu, Shui-Shong |
| 臺大學術典藏 |
2008-11-05T06:12:17Z |
A Novel Fine Track-Seeking Scheme for Optical Storage Device
|
Yen, Jia-Yush; Huang, Jao-Ming; Huang, Jao-Ming;Yen, Jia-Yush |
| 臺大學術典藏 |
2008-11-05T06:11:04Z |
Application of the continuous no-reset switching iterative learning control on a novel optical scanning system
|
Lee, Jyh-Fa; Peng, Yung-Hao; Yeh, Yea-Chin; Yen, Jia-Yush; Yen, Jia-Yush; Yeh, Yea-Chin; Peng, Yung-Hao; Lee, Jyh-Fa |
| 國立臺灣大學 |
2008-08 |
Application of the continuous no-reset switching iterative learning control on a novel optical scanning system
|
Yen, Jia-Yush; Yeh, Yea-Chin; Peng, Yung-Hao; Lee, Jyh-Fa |
| 國立臺灣大學 |
2008-06 |
Parameter identification when designing a solid-modeling-based grinding-machine controller
|
Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush |
| 國立臺灣大學 |
2008-03 |
Multivariable Robust Control of a Proton Exchange Membrane Fuel Cell System
|
Wang, Fu-Cheng; Chen, Hsuan-Tsung; Yang, Yee-Pien; Yen, Jia-Yush |
| 國立臺灣大學 |
2008 |
Quality Assurance of Engineering Education through Accreditation of Programs in Taiwan
|
Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yen, Jia-Yush; Yang, Yeong-Bin; Wei, Che-Ho |
| 國立臺灣大學 |
2008 |
Minimizing Abdominal Wall Damage during High-Intensity Focused Ultrasound Ablation by Inducing Artificial Ascites
|
吳志清; 陳文翔; 何明志; 黃凱文; 陳炯年; 顏家鈺; 李伯皇; WU, CHIH-CHING; CHEN, WEN-SHIANG; HO, MING-CHIH; HUANG, KAI-WEN; CHEN, CHIUNG-NIEN; YEN, JIA-YUSH; LEE, PO-HUANG |
| 國立臺灣大學 |
2008 |
Quality Assurance for Engineering Education in a Flat World: Emerging Educational Quality Assurance Approaches in Taiwan
|
Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yang, Yeong-Bin; Yen, Jia-Yush; Wei, Che-Ho |
| 國立臺灣大學 |
2008 |
Multivariable Robust Control of a Proton Exchange Membrane Fuel Cell System
|
Wang, Fu-Cheng; Chen, Hsuan-Tsung; Yang, Yee-Pien; Yen, Jia-Yush |
| 國立臺灣大學 |
2008 |
Parameter identification for a solid modeling based grinding machine controller design
|
Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush |
| 國立臺灣大學 |
2008 |
Vibration control of an electron beam projection lithography system employing disturbance response decoupling techniques
|
Wang, Fu-Cheng; Tsao, Yo-Chia; Yen, Jia-Yush |
| 國立臺灣大學 |
2008 |
Multivariable LQG Control of a Proton Exchange Membrane Fuel Cell System
|
Wang, Fu-Cheng; Chen, Hsuan-Tsung; Yen, Jia-Yush |
| 臺大學術典藏 |
2008 |
Vibration control of an electron beam projection lithography system employing disturbance response decoupling techniques
|
Tsao, Yo-Chia; Yen, Jia-Yush; Wang, Fu-Cheng; Wang, Fu-Cheng; Tsao, Yo-Chia; Yen, Jia-Yush |
| 臺大學術典藏 |
2008 |
Multivariable LQG Control of a Proton Exchange Membrane Fuel Cell System
|
Yen, Jia-Yush; Chen, Hsuan-Tsung; Wang, Fu-Cheng; Wang, Fu-Cheng;Chen, Hsuan-Tsung;Yen, Jia-Yush |
| 臺大學術典藏 |
2008 |
Parameter identification for a solid modeling based grinding machine controller design
|
Lai, Yi-Chih; Yen, Jia-Yush; Liu, Shu-Hung; Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush |
| 臺大學術典藏 |
2008 |
Quality Assurance for Engineering Education in a Flat World: Emerging Educational Quality Assurance Approaches in Taiwan
|
Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yang, Yeong-Bin; Yen, Jia-Yush; Wei, Che-Ho; Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yang, Yeong-Bin; Yen, Jia-Yush; Wei, Che-Ho |
| 國立臺灣大學 |
2007 |
A Variable Sampling Controller for Brushless DC Motor Drives with Low Resolution Position Sensors
|
Hung, Chung-Wen; Lin, Cheng-Tsung; Liu, Chih-Wen; Yen, Jia-Yush |
| 國立臺灣大學 |
2007 |
Vibration Control of EPL System byDisturbance Response Decoupling
|
Wang, Fu-Cheng; Tsao, Yu-Chia; Yen, Jia-Yush |
| 臺大學術典藏 |
2007 |
Vibration Control of EPL System byDisturbance Response Decoupling
|
Yen, Jia-Yush; Wang, Fu-Cheng; Tsao, Yu-Chia; Wang, Fu-Cheng;Tsao, Yu-Chia;Yen, Jia-Yush; Wang, Fu-Cheng;Tsao, Yu-Chia;Yen, Jia-Yush |
| 國立臺灣大學 |
2006-09 |
Design of a novel 6-DOF planar maglev system
|
Lai, Yi-Chih; Yen, Jia-Yush |
| 國立臺灣大學 |
2006-02 |
Solid modeling based servo system design for a high speed micro grinding machine
|
Lee, Ruey-Jeng; Chou, Kuan-Chien; Liu, Shu-Hung; Yen, Jia-Yush |
| 臺大學術典藏 |
2006 |
Design of a novel 6-DOF planar maglev system
|
Jia-Yush;Yen;Yi-Chih;Lai;JIA-YUSH YEN;Yen, J.-Y.;Lai, Y.-C.;Yen, Jia-Yush;Lai, Yi-Chih;JIA-YUSH YEN; JIA-YUSH YEN; Lai, Yi-Chih; Yen, Jia-Yush; Lai, Y.-C.; Yen, J.-Y.; JIA-YUSH YEN; Lai; Yi-Chih; Yen; Jia-Yush |
| 國立臺灣大學 |
2005-07 |
Design for control of a flexure jointed optical servo scanning platform
|
Yeh, Yea-Chin; Yen, Jia-Yush; Peng, Yung-Hao; Lee, Jyh-Fa |
| 臺大學術典藏 |
2005-07 |
Design for control of a flexure jointed optical servo scanning platform
|
Yen, Jia-Yush; Peng, Yung-Hao; Lee, Jyh-Fa; Yeh, Yea-Chin;Yen, Jia-Yush;Peng, Yung-Hao;Lee, Jyh-Fa; Yeh, Yea-Chin |
| 國立臺灣大學 |
2005-05 |
Active vibration isolation of a large stroke scanning probe microscope by using discrete sliding mode control
|
Yen, Jia-Yush; Lan, Kuo-Jung; Kramar, John A. |
| 國立臺灣大學 |
2005-03 |
Radial fine seek control with fault protection in a digital versatile disc player
|
Huang, Jao-Ming; Yen, Jia-Yush |
| 國立臺灣大學 |
2005 |
Effect of force control algorithms on the scanning probe microscope lithography system
|
Yen, Jia-Yush; Lin, I-Ming; Lee, Chih-Kung |
| 國立臺灣大學 |
2005 |
An AFM Probe Controller Design Based on μ-synthesis
|
Lan, Kuo-Jung; Yen, Jia-Yush; Lee, Chih-Kung; Lin, Yi-Ming; Chen, Cheng-Hung |
| 臺大學術典藏 |
2005 |
An AFM Probe Controller Design Based on μ-synthesis
|
Chen, Cheng-Hung; Lin, Yi-Ming; Lee, Chih-Kung; Yen, Jia-Yush; Lan, Kuo-Jung; Lan, Kuo-Jung;Yen, Jia-Yush;Lee, Chih-Kung;Lin, Yi-Ming;Chen, Cheng-Hung |
| 國立臺灣大學 |
2004-07 |
Development of an Intelligent Energy Management Network for Building Automation
|
Huang, Hsiao-Yi; Yen, Jia-Yush; Chen, Sih-Li; Ou, Feng-Chu |
Showing items 46-95 of 178 (4 Page(s) Totally)
1 2 3 4 > >>
View [10|25|50] records per page
|
