| 臺大學術典藏 |
2021-11-22T07:38:03Z |
SPM Machine Self-Sensing Position Estimation at Low Speed using Eddy Current Reflected Asymmetric Resistance
|
S.-C. Yang; R.D. Lorenz; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:03Z |
Sensorless Vibration Frequency Estimation of Servo Drive System based on the Disturbance Torque Estimation
|
C.-L. Huang; S.-C. Yang; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:04Z |
Saliency-Based Position Estimation of Permanent Magnet Synchronous Machines using Square-Wave Voltage Injection, IEEE Transactions on Industry Applications
|
S.-C. Yang; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:04Z |
Permanet Magnet Machine Electromagnetic Response and Tolerant Design to Stator Turn Fault
|
C.-C. Hsu; S.-C. Yang; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:04Z |
Fault Detection and Tolerant Capability of Permanent Magnet Machines with Two Neutral Points
|
S.-C. Yang; Y.-L. Hsu; P.-H. Chou; C.-X. Liu; G.-R. Chen; K. Li; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:04Z |
Sensorless Harmonic Estimation for Servo Drive System with Vibrational Load
|
C.-L. Huang; S.-C. Yang; Y.-L. Hsu; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:05Z |
EMF-based position sensorless drive with the instantaneous phase voltage measurement
|
G.-R. Chen; S.-C. Yang; Y.-L. Hsu; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:05Z |
Design Consideration of Interior Permanent Magnet Machine Sensorless Drive using Square-Wave Voltage Injection
|
S.-C. Yang; S.-M. Yang; J.-H. Hu; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:05Z |
Automatic sport activity classification using deep learning and wearable inertial sensors
|
Y.-L. Hsu; S.-C. Yang; H.-C. Chang; S.-L. Lin; P.-H. Chou; Y.-J. Chiu; C.-C. Lin; H.-R. Lee; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:05Z |
Analysis of Iron and Magnet Losses in SPM Machine Resulting From Injection-based Self-Sensing Position Estimation
|
S.-C. Yang; R.D. Lorenz; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:05Z |
Development of an inertial-sensing-based robotic arm control system
|
Y.-L. Hsu; P.-H. Chou; H.-R. Lee; S.-C. Yang; H.-C. Chang; W.-L. Lee; G.-T. Chen; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:06Z |
Advantage of Permanent Magnet Machine Position Sensorless Drive with Phase Voltage Measurement
|
S.-C. Yang; G.-R. Chen; T.-K. Tu; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T07:38:06Z |
Advantages of Winding Fault Tolerant Capability on Permanent Magnet Machines with Two Neutral Points in Stator Windings
|
S.-C. Yang; Y.-L. Hsu; P.-H. Chou; C.-X. Liu; G.-R. Chen; K. Li; SHIH-CHIN YANG |
| 臺大學術典藏 |
2021-11-22T08:09:03Z |
超音波輔助射出成型製程探討
|
枋定緯; 楊申語; 吳景棠; 梁佑豪; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:03Z |
創新型微光學增光分色片之設計與製造
|
楊申語; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:03Z |
滾輪微壓印製程開發與微光學元件之製作
|
楊申語; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:04Z |
Ultrasonic Vibration Heated Hot Embossing of Plastic Plates with Micro-features
|
楊申語; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:04Z |
Study on the Performance of Rapid Mold Heating/Cooling System for Micro Injection Molding
|
楊申語; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:04Z |
Novel Real-time diagnosis of gas-assisted hot embossing process by ultrasound
|
Chin-Chi Cheng; Chia-Lin Wu; Kuo-Ting Wu; Sen-Yeu Yang,; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:04Z |
Study of transfer stamping technique for fabricating microstructure
|
Jian-Wei Chen; Jing-Tang Wu; Sen-Seu Yang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:05Z |
Novel fabrication of Surface Enhanced Raman Scattering(SERS) Sensor on Polycarbonate by Gas-assisted Hot Embossing Process and Anodic Aluminum Oxide (AAO) Template
|
WEI-YI CHANG; JING-TANG WU; SEN-YEU YANG; PEI-KUEN WEI; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:05Z |
Low-temperature embossing technique for fabrication of large-area polymeric microlens array with supercritical carbon dioxide
|
Jing-Tang Wu; Ying-Ta Chu; Sen-Yeu Yang; Chen-Chung Li; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:05Z |
Flow Visualization of filling with Aid of Colored Billets During Imact Micro-Injection Molding
|
楊申語; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:05Z |
Fabrication of rigid microstructures on a metal roller using stepped rotating lithography
|
Hsin-Chun Lai; Jing-Tang Wu; Tzu-Chien Huang; Sen-Yeu Yang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:06Z |
Fabrication of microlens arrays using a CO2-assisted embossing technique
|
Tzu-Chien Huang; Bin-Da Chan; Jyun-Kai Ciou; Sen-Yeu Yang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:06Z |
Fabrication of gold sub-wavelength pores using gas-assisted hot embossing with anodic aluminum oxide (AAO) template
|
Wei-Yi Chang; Jing-Tang Wu; Sen-Yeu Yang; Kuang-Li Lee; Pei-Kuen Wei; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:06Z |
Experimental Study on the Hot Embossing of Large Thin Thermoplastic Films With Micro-Features
|
楊申語; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:06Z |
Dip coating cooperated with stepped rotating lithography to fabricate rigid microstructures onto a metal roller
|
Jing-Tang Wu; Hsin-Chun Lai; Sen-Yeu Yang; Tzu-Chien Huang; Sheng-Hsin Wu; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:07Z |
CO2-assisted thermal fusion bonding of heterogeneous materials by use of surface nano-pillars
|
Tsung-Fu Yao; Sen-Yeu Yang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:07Z |
CO2 Gas-Assisted Micro Hot Embossing Process for Large-Area Replication of Microstructures
|
Sen-Yeu Yang; Jing-Tang Wu; Ying-Ta Chu; Yi-Hao Huang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:07Z |
Application of graphene–polymer composite heaters in gas-assisted micro hot embossing
|
Cih Cheng; Kun-Cheng Ke; Sen-Yeu Yang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T08:09:07Z |
A novel fabrication of polymer film with tapered sub-wavelength structures for anti-reflection
|
Jing-Tang Wu; Sen-Yeu Yang; Wei-Chih Deng; Wei-Yi Chang; SEN-YEU YANG |
| 臺大學術典藏 |
2021-11-22T09:11:32Z |
Study on CMP Process of Glass Wafers with SiO2 Based Slurry
|
Chen, C.C.; Young, H.T.; Chiou, C.H.; Xue, M.Y.; Pan C.L.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:32Z |
Special Optics Element Design in Enhancing Illumination Effects
|
Chia-Hung Yeh; Fuh-Yu Chang; Hong-Tsu Young; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:33Z |
矽晶圓輪磨技術效能提昇之應用分析
|
楊宏智; 涂岐旭; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:33Z |
運用TRIZ之迴避設計研究及其工程應用
|
高彬淙; 楊宏智; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:33Z |
AOI Strategies for Defects Identification of Micro-Electro Mechanical System Elements
|
Young, H.T.; Chiou, H.S.; Huang, W.R.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:33Z |
產學合作成果說明(昇陽_恩德)
|
Hong-Tsu Young; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
多組矛盾對狀況下TRIZ創新法則之優先選用法
|
林傳傑; 楊宏智; 康銘元; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
化學機械拋光鑽石修整器修整率模式與工業上的應用
|
楊宏智; 鄭偉祥; 陳鯤仁; 蕭啟明; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
Unveiling Technology Development Through a New Patent Mining Classification Method
|
Huang, C.C; Young, H.T.; Wang, C.H.; Yang, S.C; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
物質-場分析中各種場的心智圖建立
|
林傳傑; 楊宏智; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
The Study of Optimal Parameters on Metal Surgical Guide Tubes Structure Design for Spinal Fusion Surgery
|
Chang, Y.T; Chang, F.Y; Young, H.T.; Yeh, C.H.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
The Image Quality Effect of Optical Path in Laser Processing System with Dynamic Focus Module
|
Ding, C.F.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
The 5-axis Rough Machining Approach for Centrifugal Impeller
|
楊宏智; 莊禮彰; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
Surface Integrity of Si Wafer in Ultra Precision Machining
|
楊宏智; 廖錫田; 黃弘毅; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
Study on Brain Phantom in Surgical Training
|
Liu, K.T; Xiao, F.R; Young, H.T.; Huang, C.Y.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
Robotic Surgical Assistant for Minimally Invasive Cranial Surgery
|
Chen, D.Y; Xiao, F.R; Young, H.T.; Huang, C.Y.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:36Z |
Real-time Lithium-ion Battery Internal Condition Estimation and Fault Detection
|
Liao, P.H.; Li, K.; Chang C.J.; Yong, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:36Z |
Path Planning for Synchronization of Laser Galvanometric Scanner and Stage Motion System
|
Ding, C.F.; Tu, W.C.; Liu, Z.X.; Young, H.T.; HONG-TSU YOUNG |
