|
|
Taiwan Academic Institutional Repository >
Browse by Date
|
Showing items 2236601-2236625 of 2303456 (92139 Page(s) Totally)
<< < 89460 89461 89462 89463 89464 89465 89466 89467 89468 89469 > >>
View [10|25|50] records per page
| 國立成功大學 |
2022 |
Recent advances in lignocellulosic biomass for biofuels and value-added bioproducts - A critical review
|
Ashokkumar, V.;Venkatkarthick, R.;Jayashree, S.;Chuetor, S.;Dharmaraj, S.;Kumar, G.;Chen, W.-H.;Ngamcharussrivichai, C. |
| 國立成功大學 |
2022 |
On the Study of Ancient Chinese Mechanical Astronomical Clocks [古中國天文鐘的研究]
|
Hwang, Z.-H.;Lin, T.-Y.;Yan, H.-S. |
| 國立成功大學 |
2022 |
Liquid hot water as sustainable biomass pretreatment technique for bioenergy production: A review
|
Chen, W.-H.;Nižetić, S.;Sirohi, R.;Huang, Z.;Luque, R.;M, Papadopoulos A.;Sakthivel, R.;Phuong, Nguyen X.;Tuan, Hoang A. |
| 國立成功大學 |
2022 |
The photoluminescence responses of two-dimensional atomic layers of MoS2excited by surface acoustic wave device
|
Chung, Chung C.-Y.;Chen, Y.-C.;Chung, Chung C.-J.;Kao, Kao K.-S. |
| 國立成功大學 |
2022 |
Theoretical model of a α-type four-cylinder double-acting stirling engine based on energy method
|
Cheng, Cheng C.-H.;Yang, H.-S.;Tan, Y.-H. |
| 國立成功大學 |
2022 |
Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells
|
Chen, W.-H.;Tsai, Z.-L.;Chang, M.-H.;Hsu, T.-H.;Kuo, P.-C. |
| 國立成功大學 |
2022 |
Use of sewage sludge biochar as a catalyst in production of biodiesel through thermally induced transesterification
|
Jung, S.;Kim, M.;Kim, Y.-H.;Lin, K.-Y.A.;Chen, W.-H.;Tsang, Y.F.;Kwon, E.E. |
| 國立成功大學 |
2022 |
Nitrogen-Doped Co Catalyst Derived from Carbothermal Reduction of Cobalt Phyllosilicate and its Application in Levulinic Acid Hydrogenation to γ-Valerolactone
|
To, D.-T.;Chiang, Y.-C.;Lee, J.-F.;Chen, Chen C.-L.;Lin, Y.-C. |
| 國立成功大學 |
2022 |
Charge-Discharge Properties of Sputtered Mg Anode in Flexible All-Solid-State Mg-Ion Batteries
|
Chen, K.-J.;Hung, F.-Y.;He, Y.-T. |
| 國立成功大學 |
2022 |
A Triple Combination of Targeting Ligands Increases the Penetration of Nanoparticles across a Blood-Brain Barrier Culture Model
|
Veszelka, S.;M�sz�ros, M�sz�ros M.;Porkol�b, G.;Szecsk�, A.;Kondor, N.;Ferenc, G.;Polg�r, T.F.;Katona, G.;K�ta, Z.;Kelemen, L.;P�li, T.;Vigh, J.P.;Walter, F.R.;Bolognin, S.;Schwamborn, J.C.;Jan, Jan J.-S.;Deli, M.A. |
| 國立成功大學 |
2022 |
Experimental and numerical study of inverse natural convection-conduction heat transfer in a cavity with a fin
|
Chen, H.-T.;Hsu, M.-H.;Huang, Y.-C.;Chang, K.-H. |
| 國立成功大學 |
2022 |
Intelligent Additive Manufacturing Architecture for Enhancing Uniformity of Surface Roughness and Mechanical Properties of Laser Powder Bed Fusion Components
|
Tran, H.;Lo, Y.;Yang, H.;Hsiao, Hsiao H.;Cheng, F.;Kuo, T. |
| 國立成功大學 |
2022 |
Mechanical Properties and Residual Stress Measurement of TiN/Ti Duplex Coating Using HiPIMS TiN on Cold Spray Ti
|
Dang, N.M.;Lin, W.-Y.;Wang, Z.-Y.;Alidokht, S.A.;Chromik, R.R.;Chen, T.Y.-F.;Lin, M.-T. |
| 國立成功大學 |
2022 |
Mechanical and biological properties of atmospheric plasma-sprayed carbon nanotube-reinforced tantalum pentoxide composite coatings on Ti6Al4V alloy
|
Lin, W.T.;Lin, Z.W.;Kuo, T.Y.;Chien, Chien C.S.;Huang, J.W.;Chung, Y.L.;Chang, Chang C.P.;Ibrahim, M.Z.;Lee, H.T. |
| 國立成功大學 |
2022 |
Scanning Electron Thermal Absorbance Microscopy for Light Element Detection and Atomic Number Analysis
|
Lin, C.-C.;Wang, S.-M.;Chen, B.-Y.;Chi, Chi C.-H.;Chang, I.-L.;Chang, Chang C.-W. |
| 國立成功大學 |
2022 |
Investigation of Mechanical Properties of Parts Fabricated with Gas- and Water-Atomized 304L Stainless Steel Powder in the Laser Powder Bed Fusion Process
|
Sehhat, M.H.;Sutton, A.T.;Hung, C.-H.;Newkirk, J.W.;Leu, M.C. |
| 國立成功大學 |
2022 |
Physical and mechanical properties of the cement composite with makino bamboo fibers disintegrated by alkali treatment
|
Yang, T.-C.;Hua, Z.-S.;Hu, Hu H.-T. |
| 國立成功大學 |
2022 |
Experimental study on construction vibration during different phases of diaphragm wall-supported deep excavation and its influence on indoor sensitive receivers
|
Ko, Y.-Y.;Lai, Lai L.-Y.;Lee, G.-H.;Wang, Y.-F.;Jao, S.-W.;Fu, T.-F. |
| 國立成功大學 |
2022 |
Wave propagation in an embedded single-walled carbon nanotube
|
Su, Y.-C.;Cho, T.-Y. |
| 國立成功大學 |
2022 |
Free vibration analysis of porous functionally graded piezoelectric microplates resting on an elastic medium subjected to electric voltages
|
Wu;C, -P;Lin;E, -l |
| 國立成功大學 |
2022 |
Fractals for the Sustainable Design of Engineered Particulate Systems
|
Assadi-Langroudi, Assadi-Langroudi A.;Abdalla, H.;Ghadr, S. |
| 國立成功大學 |
2022 |
Long-term performance and life cycle cost analysis of porous asphalt concrete [多孔隙瀝青混凝土長期績效與生命週期成本分析]
|
Chen, J.-S.;Wang, T.-J. |
| 國立成功大學 |
2022 |
Developing the AR-Based System to Assist MEP Construction [開發輔助機電工程施工作業之擴增實境系統]
|
Feng, C.-W.;Chang, Chang C.-H.;Chou, Chou C.-C. |
| 國立成功大學 |
2022 |
Hybridizing BIM and Mixed Reality to Develop the Interoperable System for MEP Construction [結合建築資訊模型及混合實境建構輔助機電工程施工之協同系統]
|
Feng, C.-W.;Lin, W.-C.;Su, J.-A. |
| 國立成功大學 |
2022 |
Seismic Test of a Reinforced Concrete Portal Frame Using Real-Time Hybrid Testing Method [即時複合實驗技術應用於鋼筋混凝土門型構架之實驗研究]
|
Yeh, S.-W.;Lu, Lu L.-Y.;Hsiao, F.-P.;Chang, F.-P. |
Showing items 2236601-2236625 of 2303456 (92139 Page(s) Totally)
<< < 89460 89461 89462 89463 89464 89465 89466 89467 89468 89469 > >>
View [10|25|50] records per page
|
