| 中國醫藥大學 |
2012-01 |
Fabrication and Verification for a Small-Form-Factor of Blue-Light Optical Pickup Head with Holographic Optical Element
|
(Yue-Jheng Lin);(Yi Chiu);(Hsi-Fu Shih);邱俊誠(Jin-Chern Chiou)* |
| 國立交通大學 |
2014-12-08T15:37:59Z |
Fabrication and Verification for the Small-Form-Factor Holographic Optical Pickup
|
Hou, Kuan Chou; Chou, Po Chien; Cheng, Stone; Lin, Yue Jheng; Chiu, Yi; Chiou, Jin Chern |
| 中國醫藥大學 |
2011-01 |
Fabrication and Verification for the Small-Form-Factor Holographic Optical Pickup
|
(Kuan Chou Hou);(Po Chien Chou);(Stone Cheng);(Yue Jheng Lin);邱一(Yi Chiu);邱俊誠(Jin-Chern Chiou)* |
| 國立交通大學 |
2014-12-08T15:23:44Z |
Fabrication and Verification of a Small-Form-Factor Blue-Light Optical Pickup Head With Holographic Optical Element
|
Lin, Yue-Jheng; Chiu, Yi; Shih, Hsi-Fu; Chiou, Jin-Chern |
| 國立臺灣大學 |
2009 |
Fabrication and verification of an implantable electrical stimulation system
|
Tsai, Y.-C.; Shih, W.-P.; Lin, M.-L.; Chang, C.-H.; Lin, W.-T.; Chiu, H.-W.; Wen, Y.-R.; Lu, S.-S.; Lin, C.-W. |
| 國立高雄第一科技大學 |
2014.01 |
Fabrication and wetting characteristics of vertically self-aligned ZnO nanorods formed by anodic aluminum oxide template
|
Kao, Tzung-Ta;Chiu, Yi-Yen; 高宗達 |
| 國立交通大學 |
2014-12-08T15:06:36Z |
Fabrication and X-ray absorption NaxCoO2 spectroscopy in layered cobaltate thin films
|
Chang, W. J.; Lin, J.-Y.; Chung, T. Y.; Chen, J. M.; Hsu, C.-H.; Hsu, S. Y.; Uen, T. M.; Wu, K. H.; Gou, Y. S.; Juang, J. Y. |
| 國立東華大學 |
2005 |
Fabrication approaches to ZnO nanowire devices
|
Tien,L. C.; Kwon,Y.; Pearton,S. J.; Ren,F.; Gila,B. P.; Norton,D. P.; LaRoche,J. R.; Kang,B. S.; Heo,Y. W. |
| 國立成功大學 |
2006-08-14 |
Fabrication challenges for a complicated micro-flow channel system at low temperature process
|
Liu, C. W.; Gau, Chie; Ko, H. S.; Yang, C. S.; Dai, B. T. |
| 國立成功大學 |
2006-05 |
Fabrication error sensitivity analysis of three-degree-of-freedom parallel submicron positioning stage
|
Chen, Shang-Liang; Huang, Y. C.; Tomizuka, Masayoshi |
| 嘉南藥理大學 |
2015 |
Fabrication Improvement of Cold Forging Hexagonal Nuts by Computational Analysis and Experiment Verification
|
Hsia, Shao-Yi; Chou, Yu-Tuan |
| 大葉大學 |
2005-10 |
Fabrication lead time and demand variability: An empirical study
|
Ballard, Glenn;Ko, Chien-Ho |
| 國立臺灣科技大學 |
2014 |
Fabrication method and experiment study of nanoscale trapezoidal groove on sapphire substrate by using atomic force microscope under a fixed cutting depth and changed down force
|
Lin, Z.-C.;Tsai, J.-S.;Hsu, Y.-C.;Lin, C.-T. |
| 中原大學 |
2004-07-27 |
Fabrication method for forming flash memory device provided with adjustable sharp end structure of the L-shaped floating gate
|
Wen-Ying Wen;Jyh-Long Horng;Erik S. Jeng;Bai-Jun Kuo;Chih-Hsueh Hung |
| 臺大學術典藏 |
2018-09-10T04:59:28Z |
Fabrication method for graded organic junctions
|
C.-C. Wu; C.-W. Chen; T.-Y. Cho; T.-Y. Luh; CHUNG-CHIH WU |
| 臺大學術典藏 |
2018-09-10T04:59:28Z |
Fabrication method for graded organic junctions”
|
C.-C. Wu; C.-W. Chen; T.-Y. Cho; T.-Y. Luh; CHUNG-CHIH WU |
| 國立交通大學 |
2018-10-11 |
FABRICATION METHOD FOR TWO-DIMENSIONAL MATERIALS
|
Jyun-Hong Huang; Tuo-Hung HOU |
| 臺大學術典藏 |
2018-09-10T08:46:32Z |
Fabrication method of high-quality Ge nanocrystals on patterned Si substrates by local melting point control
|
Chien-Wei Chiu; Ting-Wei Liao; Kuen-Yu Tsai; Fu-Min Wang; Yuen-Wuu Suen; Chieh-Hsiung Kuan; KUEN-YU TSAI; CHIEH-HSIUNG KUAN |
| 淡江大學 |
2005/01/14 |
Fabrication Method of Nanoimprint Mold Core
|
Lin, Ching-Bin;Cheng, Pao-Yu;Lin, Hung-Yi |
| 淡江大學 |
2007-07-19 |
Fabrication method of nanoimprinting mold core
|
林清彬; Lin, Ching-bin; Cheng, Pao-yu; Lin, Hung-yi |
| 淡江大學 |
2011-10-25 |
Fabrication microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites.
|
Chang, Z.C.;Lin, C.B.;Chou, Y.-C.;Lee, H.-C. |
| 國立交通大學 |
2017-04-21T06:48:21Z |
Fabrication of (111) nanotwinned Cu and its applications in interconnects of microelectronic devices
|
Chen, Chih; Liu, Chien-Min; Lu, Tien-Lin; Lin, Han-wen; Chu, Yi-Cheng; Lu, Chia-Ling; Juang, Jing-Ye; Chen, Kuan-Neng; Tu, K. N. |
| 國立交通大學 |
2019-04-02T05:58:15Z |
Fabrication of (111)-Oriented Nanotwinned Au Films for Au-to-Au Direct Bonding
|
Wu, John A.; Huang, Chih-Yang; Wu, Wen-Wei; Chen, Chih |
| 國立交通大學 |
2014-12-08T15:14:48Z |
Fabrication of 0.15-mu m Gamma-shaped gate In0.52Al0.48As/In0.6Ga0.4As metamorphic HEMTs using DUV lithography and tilt dry-etching technique
|
Lien, Yi-Chung; Chen, Szu-Hung; Chang, Edward Yi; Lee, Ching-Ting; Chu, Li-Hsin; Chang, Chia-Yuan |
| 國立成功大學 |
2007-02 |
Fabrication of 0.15-mu m Gamma-shaped gate In0.52Al0.48As/In0.6Ga0.4As metamorphic HEMTs using DUV lithography and tilt dry-etching technique
|
Lien, Yi-Chung; Chen, Szu-Hung; Chang, Edward Yi; Lee, Ching-Ting; Chu, Li-Hsin; Chang, Chia-Yuan |
| 國立臺灣師範大學 |
2014-12-02T06:41:38Z |
Fabrication of 2D Arrays of CdSe Pillars for Optics Applications
|
Su, Y. W.; Wu, C. S.; Chen, C. D.; Chen, C. C.; Liu, H. L. |
| 國立臺灣大學 |
2006 |
Fabrication of 2D Ordered Structure of Self-Assembled Block Copolymers Containing Gold Nanoparticles
|
Dai, Chi-An; Wu, Yu-Lin; Lee, Yi-Huan; Chang, Chun-Jie; Su, Wei-Fang |
| 國立臺灣大學 |
2005 |
Fabrication of 2D ordered structure of self-assembled block copolymers containing gold nanoparticles
|
Dai, C-A; Wu, Y-L; Lee, Y-H; Chang, C-J; Su, W-F |
| 國立臺灣大學 |
2005 |
Fabrication of 2D Ordered Structure of Self-Assembled Block Copolymers Containing Gold Nanoparticles
|
Dai, Chi-An; Wu, Yu-Lin; Lee, Yi-Huan; Chang, Chun-Jie; Su, Wei-Fang |
| 臺大學術典藏 |
2020-01-06T03:04:05Z |
Fabrication of 2D ordered structure of self-assembled block copolymers containing gold nanoparticles
|
Dai, C.-A.; Wu, Y.-L.; Lee, Y.-H.; Chang, C.-J.; Su, W.-F.; CHI-AN DAI |
| 臺大學術典藏 |
2020-05-12T02:53:36Z |
Fabrication of 2D ordered structure of self-assembled block copolymers containing gold nanoparticles
|
Dai, C.-A.; Wu, Y.-L.; Lee, Y.-H.; Chang, C.-J.; Su, W.-F.; WEI-FANG SU |
| 臺大學術典藏 |
2018-09-10T07:09:08Z |
Fabrication of 2D Photonic Crystal Slab Waveguides by Using Nanoimprint Lithography
|
C. X. Yan; L. A. Wang; LON A. WANG |
| 國立成功大學 |
2016-05 |
Fabrication of 2D structure of MoS2 assisted by carbon template for use in electrochemical capacitor
|
Sari, Fitri Nur Indah; Ting, Jyh-Ming |
| 淡江大學 |
1999-10 |
Fabrication of 3-D micro-coils with ferro-magnetic cores using a standard CMOS process
|
楊龍杰; Yang, Lung-jieh; Hsieh, K. Y.; Chiou, J. H.; Chen, J. Y.; Chang, C. L.; Chang, P. Z. |
| 臺大學術典藏 |
1999-05 |
Fabrication of 3-D Microcoils with Ferromagnetic Cores Using a Standard CMOS Process
|
Pei-Zen Chang; Pei-Zen Chang |
| 國立臺灣大學 |
1999-05 |
Fabrication of 3-D Microcoils with Ferromagnetic Cores Using a Standard CMOS Process
|
Lungjieh Yang, Kuangyeh Hsieh, Jinghung Chiou, Jennyi Chen, Chienliu Chang,; Pei-Zen Chang |
| 國立成功大學 |
2009-10 |
Fabrication of 3-D Submicron Glass Structures by FIB
|
Chao, C. H.; Shen, S. C.; Wu, J. R. |
| 國立中山大學 |
2007 |
Fabrication of 3-D submicron glass structures by FIB
|
C.H. Chao;C.T. Pan;J.R. Wu |
| 臺大學術典藏 |
2018-09-10T07:03:08Z |
Fabrication of 300-nm Cr-doped fibers using fiber drawing with pressure control
|
Huang, Y.-C.; Wang, J.-S.; Lu, Y.-K.; Wu, C.-T.; Huang, S.-L.; Cheng, W.-H.; SHENG-LUNG HUANG |
| 國立臺灣師範大學 |
2014-12-02T06:41:30Z |
Fabrication of 3D Macroporous Structures of II?VI and III?V Semiconductors Using Electrochemical Deposition
|
Y.-C. Lee; T.-J. Kuo; C.-J. Hsu; Y.-W. Su; Chia-Chun Chen |
| 國立交通大學 |
2018-08-21T05:56:34Z |
Fabrication of 3D Microfluidic Chip integrating Concentration gradient design and Perfusion system for Embryo coculture with Stromal cells
|
Chang, Pei-Yu; Chang, Kuo-Wei; Lin, Ciou-Wen; Shih, Po-Chen; Liu, Cheng-Hsien; Li, Chin-Jung; Tien, Chang-Hung; Huang, Hong-Yuan; Hsu, Wen-Syang; Yao, Da-Jeng; Fan, Shih-Kang |
| 臺大學術典藏 |
2018-09-10T09:23:11Z |
Fabrication of 3D microfluidic chip integrating concentration gradient design and perfusion system for embryo coculture with stromal cells
|
SHIH-KANG FAN; SHIH-KANG FAN |
| 國立交通大學 |
2014-12-08T15:13:19Z |
Fabrication of 3D photoresist microstructures for the polymer vertical comb drive
|
Chung, Junwei; Hsu, Wensyang |
| 國立成功大學 |
2005-10 |
Fabrication of 3D polymer microstructures using electron beam lithography and nanoimprinting technologies
|
Chen, Kuo-Shen; Ko, Fu-Hsiang; Lin, I-Kuan |
| 國立高雄應用科技大學 |
2014-10 |
Fabrication of 3D random microlens array composite optical film with self-assembly
|
Q.C. Hsu, Y.L. Chen |
| 國立臺灣科技大學 |
2018 |
Fabrication of 45°Mirror Coupling Polymer Waveguides for Short-Link Optical Interconnect Applications
|
張官清 |
| 臺北醫學大學 |
2014 |
Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes
|
Young, Tai-Horng;Wang, I-Jong;Hu, Fung-Rong;Wang, Tsung-Jen |
| 臺大學術典藏 |
2022-07-15T08:17:34Z |
Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes
|
Young T.-H.; Wang I.-J.; FUNG-RONG HU; Wang T.-J. |
| 臺北醫學大學 |
2014 |
Fabrication of a bioengineered corneal endothelial cell sheet usingchitosan/polycaprolactone blend membranes
|
TH, Young;IJ, Wang;FR, Hu;TJ, Wang |
| 臺北醫學大學 |
2014 |
Fabrication of a bioengineered corneal endothelial cell sheet usingchitosan/polycaprolactone blend membranes
|
Young, TH;Wang, IJ;Hu, FR;Wang, TJ |
