| 嘉南藥理大學 |
2015 |
Fabrication Improvement of Cold Forging Hexagonal Nuts by Computational Analysis and Experiment Verification
|
Hsia, Shao-Yi; Chou, Yu-Tuan |
| 大葉大學 |
2005-10 |
Fabrication lead time and demand variability: An empirical study
|
Ballard, Glenn;Ko, Chien-Ho |
| 國立臺灣科技大學 |
2014 |
Fabrication method and experiment study of nanoscale trapezoidal groove on sapphire substrate by using atomic force microscope under a fixed cutting depth and changed down force
|
Lin, Z.-C.;Tsai, J.-S.;Hsu, Y.-C.;Lin, C.-T. |
| 中原大學 |
2004-07-27 |
Fabrication method for forming flash memory device provided with adjustable sharp end structure of the L-shaped floating gate
|
Wen-Ying Wen;Jyh-Long Horng;Erik S. Jeng;Bai-Jun Kuo;Chih-Hsueh Hung |
| 臺大學術典藏 |
2018-09-10T04:59:28Z |
Fabrication method for graded organic junctions
|
C.-C. Wu; C.-W. Chen; T.-Y. Cho; T.-Y. Luh; CHUNG-CHIH WU |
| 臺大學術典藏 |
2018-09-10T04:59:28Z |
Fabrication method for graded organic junctions”
|
C.-C. Wu; C.-W. Chen; T.-Y. Cho; T.-Y. Luh; CHUNG-CHIH WU |
| 國立交通大學 |
2018-10-11 |
FABRICATION METHOD FOR TWO-DIMENSIONAL MATERIALS
|
Jyun-Hong Huang; Tuo-Hung HOU |
| 臺大學術典藏 |
2018-09-10T08:46:32Z |
Fabrication method of high-quality Ge nanocrystals on patterned Si substrates by local melting point control
|
Chien-Wei Chiu; Ting-Wei Liao; Kuen-Yu Tsai; Fu-Min Wang; Yuen-Wuu Suen; Chieh-Hsiung Kuan; KUEN-YU TSAI; CHIEH-HSIUNG KUAN |
| 淡江大學 |
2005/01/14 |
Fabrication Method of Nanoimprint Mold Core
|
Lin, Ching-Bin;Cheng, Pao-Yu;Lin, Hung-Yi |
| 淡江大學 |
2007-07-19 |
Fabrication method of nanoimprinting mold core
|
林清彬; Lin, Ching-bin; Cheng, Pao-yu; Lin, Hung-yi |
| 淡江大學 |
2011-10-25 |
Fabrication microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites.
|
Chang, Z.C.;Lin, C.B.;Chou, Y.-C.;Lee, H.-C. |
| 國立交通大學 |
2017-04-21T06:48:21Z |
Fabrication of (111) nanotwinned Cu and its applications in interconnects of microelectronic devices
|
Chen, Chih; Liu, Chien-Min; Lu, Tien-Lin; Lin, Han-wen; Chu, Yi-Cheng; Lu, Chia-Ling; Juang, Jing-Ye; Chen, Kuan-Neng; Tu, K. N. |
| 國立交通大學 |
2019-04-02T05:58:15Z |
Fabrication of (111)-Oriented Nanotwinned Au Films for Au-to-Au Direct Bonding
|
Wu, John A.; Huang, Chih-Yang; Wu, Wen-Wei; Chen, Chih |
| 國立交通大學 |
2014-12-08T15:14:48Z |
Fabrication of 0.15-mu m Gamma-shaped gate In0.52Al0.48As/In0.6Ga0.4As metamorphic HEMTs using DUV lithography and tilt dry-etching technique
|
Lien, Yi-Chung; Chen, Szu-Hung; Chang, Edward Yi; Lee, Ching-Ting; Chu, Li-Hsin; Chang, Chia-Yuan |
| 國立成功大學 |
2007-02 |
Fabrication of 0.15-mu m Gamma-shaped gate In0.52Al0.48As/In0.6Ga0.4As metamorphic HEMTs using DUV lithography and tilt dry-etching technique
|
Lien, Yi-Chung; Chen, Szu-Hung; Chang, Edward Yi; Lee, Ching-Ting; Chu, Li-Hsin; Chang, Chia-Yuan |
| 國立臺灣師範大學 |
2014-12-02T06:41:38Z |
Fabrication of 2D Arrays of CdSe Pillars for Optics Applications
|
Su, Y. W.; Wu, C. S.; Chen, C. D.; Chen, C. C.; Liu, H. L. |
| 國立臺灣大學 |
2006 |
Fabrication of 2D Ordered Structure of Self-Assembled Block Copolymers Containing Gold Nanoparticles
|
Dai, Chi-An; Wu, Yu-Lin; Lee, Yi-Huan; Chang, Chun-Jie; Su, Wei-Fang |
| 國立臺灣大學 |
2005 |
Fabrication of 2D ordered structure of self-assembled block copolymers containing gold nanoparticles
|
Dai, C-A; Wu, Y-L; Lee, Y-H; Chang, C-J; Su, W-F |
| 國立臺灣大學 |
2005 |
Fabrication of 2D Ordered Structure of Self-Assembled Block Copolymers Containing Gold Nanoparticles
|
Dai, Chi-An; Wu, Yu-Lin; Lee, Yi-Huan; Chang, Chun-Jie; Su, Wei-Fang |
| 臺大學術典藏 |
2020-01-06T03:04:05Z |
Fabrication of 2D ordered structure of self-assembled block copolymers containing gold nanoparticles
|
Dai, C.-A.; Wu, Y.-L.; Lee, Y.-H.; Chang, C.-J.; Su, W.-F.; CHI-AN DAI |
| 臺大學術典藏 |
2020-05-12T02:53:36Z |
Fabrication of 2D ordered structure of self-assembled block copolymers containing gold nanoparticles
|
Dai, C.-A.; Wu, Y.-L.; Lee, Y.-H.; Chang, C.-J.; Su, W.-F.; WEI-FANG SU |
| 臺大學術典藏 |
2018-09-10T07:09:08Z |
Fabrication of 2D Photonic Crystal Slab Waveguides by Using Nanoimprint Lithography
|
C. X. Yan; L. A. Wang; LON A. WANG |
| 國立成功大學 |
2016-05 |
Fabrication of 2D structure of MoS2 assisted by carbon template for use in electrochemical capacitor
|
Sari, Fitri Nur Indah; Ting, Jyh-Ming |
| 淡江大學 |
1999-10 |
Fabrication of 3-D micro-coils with ferro-magnetic cores using a standard CMOS process
|
楊龍杰; Yang, Lung-jieh; Hsieh, K. Y.; Chiou, J. H.; Chen, J. Y.; Chang, C. L.; Chang, P. Z. |
| 臺大學術典藏 |
1999-05 |
Fabrication of 3-D Microcoils with Ferromagnetic Cores Using a Standard CMOS Process
|
Pei-Zen Chang; Pei-Zen Chang |
| 國立臺灣大學 |
1999-05 |
Fabrication of 3-D Microcoils with Ferromagnetic Cores Using a Standard CMOS Process
|
Lungjieh Yang, Kuangyeh Hsieh, Jinghung Chiou, Jennyi Chen, Chienliu Chang,; Pei-Zen Chang |
| 國立成功大學 |
2009-10 |
Fabrication of 3-D Submicron Glass Structures by FIB
|
Chao, C. H.; Shen, S. C.; Wu, J. R. |
| 國立中山大學 |
2007 |
Fabrication of 3-D submicron glass structures by FIB
|
C.H. Chao;C.T. Pan;J.R. Wu |
| 臺大學術典藏 |
2018-09-10T07:03:08Z |
Fabrication of 300-nm Cr-doped fibers using fiber drawing with pressure control
|
Huang, Y.-C.; Wang, J.-S.; Lu, Y.-K.; Wu, C.-T.; Huang, S.-L.; Cheng, W.-H.; SHENG-LUNG HUANG |
| 國立臺灣師範大學 |
2014-12-02T06:41:30Z |
Fabrication of 3D Macroporous Structures of II?VI and III?V Semiconductors Using Electrochemical Deposition
|
Y.-C. Lee; T.-J. Kuo; C.-J. Hsu; Y.-W. Su; Chia-Chun Chen |
| 國立交通大學 |
2018-08-21T05:56:34Z |
Fabrication of 3D Microfluidic Chip integrating Concentration gradient design and Perfusion system for Embryo coculture with Stromal cells
|
Chang, Pei-Yu; Chang, Kuo-Wei; Lin, Ciou-Wen; Shih, Po-Chen; Liu, Cheng-Hsien; Li, Chin-Jung; Tien, Chang-Hung; Huang, Hong-Yuan; Hsu, Wen-Syang; Yao, Da-Jeng; Fan, Shih-Kang |
| 臺大學術典藏 |
2018-09-10T09:23:11Z |
Fabrication of 3D microfluidic chip integrating concentration gradient design and perfusion system for embryo coculture with stromal cells
|
SHIH-KANG FAN; SHIH-KANG FAN |
| 國立交通大學 |
2014-12-08T15:13:19Z |
Fabrication of 3D photoresist microstructures for the polymer vertical comb drive
|
Chung, Junwei; Hsu, Wensyang |
| 國立成功大學 |
2005-10 |
Fabrication of 3D polymer microstructures using electron beam lithography and nanoimprinting technologies
|
Chen, Kuo-Shen; Ko, Fu-Hsiang; Lin, I-Kuan |
| 國立高雄應用科技大學 |
2014-10 |
Fabrication of 3D random microlens array composite optical film with self-assembly
|
Q.C. Hsu, Y.L. Chen |
| 國立臺灣科技大學 |
2018 |
Fabrication of 45°Mirror Coupling Polymer Waveguides for Short-Link Optical Interconnect Applications
|
張官清 |
| 臺北醫學大學 |
2014 |
Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes
|
Young, Tai-Horng;Wang, I-Jong;Hu, Fung-Rong;Wang, Tsung-Jen |
| 臺大學術典藏 |
2022-07-15T08:17:34Z |
Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes
|
Young T.-H.; Wang I.-J.; FUNG-RONG HU; Wang T.-J. |
| 臺北醫學大學 |
2014 |
Fabrication of a bioengineered corneal endothelial cell sheet usingchitosan/polycaprolactone blend membranes
|
TH, Young;IJ, Wang;FR, Hu;TJ, Wang |
| 臺北醫學大學 |
2014 |
Fabrication of a bioengineered corneal endothelial cell sheet usingchitosan/polycaprolactone blend membranes
|
Young, TH;Wang, IJ;Hu, FR;Wang, TJ |
| 國立交通大學 |
2014-12-08T15:12:08Z |
Fabrication of a carbon fiber paper as the electrode and its application toward developing a sensitive unmediated amperometric biosensor
|
Yuan, Chiun-Jye; Wang, Chung-Liang; Wu, Teng Yang; Hwang, Kuo-Chu; Chao, Wei-Chi |
| 臺北醫學大學 |
2003 |
Fabrication of a cartilage implant. A method of fabricating a cartilage implant including embedding and growing chondrocytes or mesenchymal stem cells in a three-dimensional substrate. The substrate contains randomly rewound a-helical monomers of type I c
|
賴文福; Lai WF T; Tang JR; Chen CT |
| 臺北醫學大學 |
2005 |
Fabrication of a cartilage implant. USA Patent NO. US6,852,331B2
|
陳建志; Lai WF; Tang JR; Chen CT; ; ; |
| 國立臺灣海洋大學 |
2007-05 |
Fabrication of a close-packed hemispherical submicron lens array and its application in photolithography
|
Pei-Kuen Wei; Wei-Lun Chang |
| 國立交通大學 |
2014-12-08T15:41:21Z |
Fabrication of a deep polyimide waveguide grating for wavelength selection
|
Lu, YT; Yang, ZL; Chi, S |
| 元智大學 |
2019-12-05 |
Fabrication of a double-gate p-type SnO TFT to improve transistor characteristics
|
Wei-Sheng Liu; Yi-Ming Chu; Chih-Hao Hsu; Yu Jiang; Meng-Jung Chiang; Yi-Chun Lai; Yen-Lin Chen |
| 國立交通大學 |
2014-12-08T15:29:12Z |
Fabrication of a double-sided micro-lens array by a glass molding technique
|
Huang, Chien-Yao; Hsiao, Wen-Tse; Huang, Kuo-Cheng; Chang, Keng-Souo; Chou, Hsiao-Yu; Chou, Chang-Pin |
| 國立交通大學 |
2014-12-08T15:16:28Z |
Fabrication of a flexible and disposable microreactor using a dry film photoresist
|
Tsai, Yuan-Chien; Yang, Shung-Jim; Lee, Hsun-Tsing; Jen, Hsiu-Ping; Hsieh, You-Zung |
| 中國文化大學 |
2016-02-15 |
Fabrication of a flexible H-2 sensor based on Pd nanoparticles modified polypyrrole films
|
Su, Pi-Guey; Liao, Shin-Long |
| 中國文化大學 |
2016-02 |
Fabrication of a flexible H-2 sensor based on Pd nanoparticles modified polypyrrole films
|
Su, PG (Su, Pi-Guey); Liao, SL (Liao, Shin-Long) |
