| 臺大學術典藏 |
2019-10-31T07:58:00Z |
Fabrication of metrology test structures with helium ion beam direct write
|
KUEN-YU TSAI;Chao-Te Lee;Chit-Sung Hong;Bor-Yuan Shew;Jia-Han Li;Kuen-Yu Tsai*;Chun-Hung Liu;Sheng-Yung Chen;Sheng-Wei Chien;Chien-Lin Lee; Chien-Lin Lee; Sheng-Wei Chien; Sheng-Yung Chen; Chun-Hung Liu; Kuen-Yu Tsai*; Jia-Han Li; Bor-Yuan Shew; Chit-Sung Hong; Chao-Te Lee; KUEN-YU TSAI |
| 臺大學術典藏 |
2019-10-31T07:57:58Z |
Fabrication of metrology test structures with programmed imperfection using helium ion beam direct write
|
KUEN-YU TSAI;Jia-Han Li;Kuen-Yu Tsai*;Sheng-Wei Chien; Sheng-Wei Chien; Kuen-Yu Tsai*; Jia-Han Li; KUEN-YU TSAI |
| 臺大學術典藏 |
2022-01-03T08:01:06Z |
Fabrication of metrology test structures with programmed imperfection using helium ion beam direct write
|
JIA-HAN LI |
| 臺大學術典藏 |
2018-09-10T08:18:26Z |
Fabrication of metrology test structures with programmed line edge roughness using electron beam direct write
|
Fu-Min Wang;Kuen-Yu Tsai;Jia-Han Li;Alek C. Chen;Yen-Min Lee;Yu-Tian Shen;Hsin-Hung Cheng;Chieh-Hsiang Kuan; Fu-Min Wang; Kuen-Yu Tsai; Jia-Han Li; Alek C. Chen; Yen-Min Lee; Yu-Tian Shen; Hsin-Hung Cheng; Chieh-Hsiang Kuan; KUEN-YU TSAI |
| 臺大學術典藏 |
2022-01-03T08:01:17Z |
Fabrication of metrology test structures with programmed line edge roughness using electron beam direct write
|
Fu-Min Wang; Kuen-Yu Tsai; Jia-Han Li; Alek C. Chen; Yen-Min Lee; Yu-Tian Shen; Hsin-Hung Cheng; Chieh-Hsiang Kuan; JIA-HAN LI |
| 國立臺灣科技大學 |
2012 |
Fabrication of Mg-based bulk metallic glass molds by thermal imprint process
|
Chang, F.-Y.;Cheng, C.-Y.;Chau, S.-W.;Chu, J.P.;Chen, Y.-C. |
| 臺大學術典藏 |
2020-01-17T07:47:18Z |
Fabrication of Mg-based bulk metallic glass molds by thermal imprint process
|
Chen, Y.-C.; SHIU-WU CHAU; Chang, F.-Y.; Cheng, C.-Y.; Chau, S.-W.; Chu, J.P. |
| 國立臺灣海洋大學 |
2007-03-25 |
Fabrication of Mg-Y-Cu Bulk Metallic Glass by Mechanical Alloying and Hot Consolidation
|
P. Y. Lee;W. C. Liu;C. K. Lin;J. C. Huang |
| 國立中山大學 |
2007 |
Fabrication of Mg-Y-Cu Bulk Metallic Glass by Mechanical Alloying and Hot Consolidation
|
P.Y. Lee;W.C. Liu;C.K. Lin;J.C. Huang |
| 國立臺灣大學 |
2010 |
Fabrication of micro ball joint by using micro-EDM and electroforming
|
Lin, Chang-Sheng; Liao, Yunn-Shiuan; Cheng, Yi-Ting; Lai, Yunn-Cheng |
| 國立臺灣師範大學 |
2014-10-30T09:36:19Z |
Fabrication of micro free standing structure in p-type silicon using an electrochemical etching technique
|
楊啟榮; 林明憲; 湯杜翔; 鍾武雄; Yang; Chii-Rong; Lin; Ming-Hsien; Tang; Du-Hsiang; Chung; Wu-Hsung |
| 淡江大學 |
2002-05 |
Fabrication of micro radial grooved heat pipes
|
康尚文; Kang , Shung-wen; Tsai, Sheng-hong; Chen, Hong-chih |
| 元智大學 |
2008-09 |
Fabrication of Micro Sensors on a Flexible Substrate
|
李其源; Guan-Wei Wu; Wei-Jung Hsieh |
| 元智大學 |
2009-01 |
Fabrication of micro temperature sensor and heater in a stainless steel-based micro reformer
|
李其源; 李碩仁; Wen-Pin Shih; Chen-Hen Lin; Chi-Chung Chang; Pei-Zen Chang |
| 元智大學 |
2009-01 |
Fabrication of micro temperature sensor and heater in a stainless steel-based micro reformer
|
李其源; 李碩仁; Wen-Pin Shih; Chen-Hen Lin; Chi-Chung Chang; Pei-Zen Chang |
| 元智大學 |
2007-08 |
Fabrication of micro temperature sensor on the flexible substrate
|
李其源; 李碩仁; Guan-Wei Wu |
| 元智大學 |
2007-08 |
Fabrication of micro temperature sensor on the flexible substrate
|
李其源; 李碩仁; Guan-Wei Wu |
| 元智大學 |
2012-12-06 |
Fabrication of micro trapezoidal strip
|
Tzu-Yao Hong; Yi-Hsin Lan; Mao-Kuo Wei; Chi-Feng Lin; Tien-Lung Chiu; Jiun-Haw Lee |
| 國立勤益科技大學 |
2012-04-18 |
Fabrication of micro-channel arrays on thin stainless steel sheets for proton exchange membrane fuel cells using micro-stamping technology
|
Ye, Tsung-Chia ChenEmail authorJiun-Ming |
| 國立勤益科技大學 |
2012-05 |
Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure
|
洪榮崇 |
| 國立勤益科技大學 |
2012-05 |
Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure hydroforming apparatus
|
洪榮崇 |
| 國立交通大學 |
2014-12-08T15:22:35Z |
Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure hydroforming apparatus
|
Hung, Jung-Chung; Lin, Chih-Chia |
| 國立臺灣科技大學 |
2005 |
Fabrication of micro-lens array using dynamic mask projecting system and research electroforming technology
|
Jeng T.-W.; Wang C.-C.; Hsu F.-H.; Liu W.-C.; Jeng J.-Y. |
| 國立臺灣大學 |
2005-07 |
Fabrication of micro-lens array using dynamic mask projecting system and research electroforming technology
|
Jeng, Tz-Wei; Wang, Chun-Chih; Hsu, Feng-Hao; Liu, Wei-Chih; Jeng, Jeng-Ywan |
| 臺大學術典藏 |
2018-09-10T04:49:50Z |
Fabrication of micro-optical switch by post-CMOS micromachining process
|
Cheng, Y.-C.; Lee, C.-Y.; Dai, C.-L.; Chen, W.-J.; Chang, P.-Z.; Chen, P.-H.; PING-HEI CHEN |
