| 嘉南藥理大學 |
2014-11 |
Fabrication of P3HT/gold nanoparticle LB films by P3HT templating Langmuir monolayer
|
Chen, Liang-Huei; Hsu, Wen-Ping; Chan, Han-Wen; Lee, Yuh-Lang |
| 淡江大學 |
2002-11-04 |
Fabrication of PA6/Clay nanocomposite and the analysis of its melt rheology
|
Lin, Gwo-geng; Jian, Yi-feng Jang |
| 國立成功大學 |
2022-02 |
Fabrication of Paper-Based Microfluidics by Spray on Printed Paper
|
Juang;Yi-Je;Hsu;Shu-Kai |
| 國立高雄第一科技大學 |
2013.03 |
Fabrication of Parylene-Based High-Aspect-Ratio Suspended Structure Using a Silicon-on-Insulator Wafer
|
Kuo, Wen-Cheng;Chen, Chen-Wei |
| 國立交通大學 |
2014-12-08T15:25:11Z |
Fabrication of pattern-depended metal induced lateral crystallization polysilicon thin film transistors with NH3 plasma passivation effects
|
Chou, Cheng-Wei; Wu, Yung-Chun; Wu, Yuan-Chun; Chang, Ting-Chang; Liu, Po-Tsun; Lou, Jen-Chung; Huang, Wen-Jun; Chang, Chun-Yen; Sze, Simon M. |
| 國立交通大學 |
2014-12-08T15:09:45Z |
Fabrication of Patterned Superhydrophobic Polybenzoxazine Hybrid Surfaces
|
Liao, Chun-Syong; Wang, Chih-Feng; Lin, Han-Ching; Chou, Hsin-Yi; Chang, Feng-Chih |
| 義守大學 |
2009-03 |
Fabrication of Patterned Superhydrophobic Polybenzoxazine Hybrid Surfaces
|
Liao CS; Wang CF; Lin HC;Chou HY;Chang FC |
| 淡江大學 |
2008-11 |
Fabrication of PCP Pulsating Heat Pipe
|
Lin, Yu-hsing; Chen, Kuan-ting; Cheng, Po-hsuan; Kang, Shung-wen |
| 國立交通大學 |
2014-12-08T15:15:24Z |
Fabrication of PDMS (polydimethylsiloxane) microlens and diffuser using replica molding
|
Shih, Teng-Kai; Chen, Chia-Fu; Ho, Jeng-Rong; Chuang, Fang-Tzu |
| 國立臺灣科技大學 |
2015 |
Fabrication of PDMS passive micromixer by lost-wax casting
|
Chung, C.;Chen, Y.-J.;Chen, P.-C.;Chen, C.-Y. |
| 國立成功大學 |
2015-08 |
Fabrication of PDMS passive micromixer by lost-wax casting
|
Chung, Chunhui; Chen, Yann-Jiun; Chen, Pin-Chaun; Chen, Chia-Yuan |
| 國立臺灣海洋大學 |
2008-05 |
Fabrication of PDMS-Based Nitrite Sensors Using Teflon AF Coating Microchannels
|
Chih-Wei Wu;Gwo-Ching Gong |
| 國立中山大學 |
2003 |
Fabrication of PEEK Composites Reinforced by Nano-Sized SiO2 and Al2O3
|
C.M. Tsai;M.C. Kuo;J.C. Huang |
| 國立交通大學 |
2017-04-21T06:48:32Z |
Fabrication of PEG Hydrogel Microstructures in Microfluidic System for Multicellular Spheroid Formation, Culturing and Analysis
|
Fu, Chien-Yu; Tseng, Sheng-Yang; Yang, Shih-Mo; Hsu, Long; Liu, Cheng-Hsien; Chang, Hwan-You |
| 國立臺灣大學 |
2006 |
Fabrication of PEO17?OPV3 Templated Titania Nano-Hollow Rods and Their Aggregating Microspheres
|
Hsieh, Chi-Chun; Lin, King-Fu; Chien, An-Ting |
| 臺大學術典藏 |
2022-03-22T08:27:30Z |
Fabrication of periodic Ag tetrahedral nanopyramids via H2O2-assisted nanosphere lithography for plasmonic applications
|
Lu Y.-C;Hsueh C.-H.; Lu Y.-C; Hsueh C.-H.; CHUN-HWAY HSUEH |
| 臺大學術典藏 |
2022-03-22T08:30:27Z |
Fabrication of periodic Ag tetrahedral nanopyramids via H2O2-assisted nanosphere lithography for plasmonic applications
|
Lu Y.-C;Hsueh C.-H.; Lu Y.-C; Hsueh C.-H.; CHUN-HWAY HSUEH |
| 臺大學術典藏 |
2022-03-22T08:30:29Z |
Fabrication of periodic Ag tetrahedral nanopyramids via H2O2-assisted nanosphere lithography for plasmonic applications
|
Lu Y.-C;Hsueh C.-H.; Lu Y.-C; Hsueh C.-H.; CHUN-HWAY HSUEH |
| 臺大學術典藏 |
2021-08-21T23:58:57Z |
Fabrication of periodic Ag tetrahedral nanopyramids via H2O2-assisted nanosphere lithography for plasmonic applications
|
Lu, Ying Chou; CHUN-HWAY HSUEH |
| 臺大學術典藏 |
2022-01-03T08:01:04Z |
Fabrication of periodic bowtie structure on vanadium dioxide by nanosphere lithography for smart window applications
|
Ying-Chou Lu; Yi-Chen Lai; Jia-Han Li; Chun-Hway Hsueh*; JIA-HAN LI |
| 臺大學術典藏 |
2019-09-25T04:09:47Z |
Fabrication of periodic nanostructure in nanoimprint process
|
Wu T.-C.;Chang S.-H.;Hsueh C.-H.;Lin H.-Y.;Chang F.-Y.;CHUN-HWAY HSUEH; Chang F.-Y.; Lin H.-Y.; Hsueh C.-H.; Chang S.-H.; Wu T.-C.; CHUN-HWAY HSUEH |
| 國立彰化師範大學 |
2011-10 |
Fabrication of Perpendicular MgO-Based Magnetic Tunnel Junctions With TbFe/FeCo Electrodes
|
Ye, Lin-Xiu; Lee, Ching-Ming; Lee, Jia-Mou; Lin, Jia-Hua; Liu, Jin-Zhen; Wu, Jong-Ching; Wu, Te-Ho |
| 臺大學術典藏 |
2018-09-10T07:09:07Z |
Fabrication of Phase Shifting Mask Patterns by Utilizing Top Surface Imaging Technique
|
L. A. Wang,; H. L. Chen,; C. H. Lin,; LON A. WANG |
| 國立臺灣大學 |
2011 |
Fabrication of phase-change chalcogenide Ge2Sb2Te5 patterns by laser-induced forward transfer
|
Tseng, Ming Lun; Chen, Bo Han; Chu, Cheng Hung; Chang, Chia Min; Lin, Wei Chih; Chu, Nien-Nan; Mansuripur, Masud; Liu, Ai Qun; Tsai, Din Ping |
| 國立臺灣大學 |
2011 |
Fabrication of phase-change Ge 2 Sb 2 Te 5 nano-rings.
|
Chu, Cheng Hung; Tseng, Ming Lun; Da Shiue, Chiun; Chen, Shuan Wei; Chiang, Hai-Pang; Mansuripur, Masud; Tsai, Din Ping |
| 國立臺灣海洋大學 |
2011 |
Fabrication of phase-change Ge2Sb2Te5 nano-rings
|
Chu CH;Tseng ML;Shiue CD;Chen SW;Chiang HP;Mansuripur M;Tsai DP. |
| 國立臺灣大學 |
2009-08 |
Fabrication of photometric dip-strip test systems for detection of (1→3)-D- glucan using crude (1→3)-D-glucanase from sprouts of Vigna aconitifolia.
|
Bagal-Kestwal, D.; Kestwal, R. M.; Chiang, B. H. |
| 國立臺灣海洋大學 |
2006-10 |
Fabrication of photonic bandgap structures with designed defects by edge diffraction lithography
|
Pei-Kuen Wei; Wei-Lun Chang; Shieh-Li Chou; You-Ren Chang |
| 臺大學術典藏 |
2018-09-10T06:58:06Z |
Fabrication of photonic crystal light-emitting diode with photoelectrochemical wet etching and phase mask interference
|
Chen, G.-Y.; Lin, C.-H.; Yeh, D.-M.; Lu, C.-F.; Huang, C.-F.; Yang, C.C.; CHIH-CHUNG YANG |
| 國立高雄應用科技大學 |
2012 |
Fabrication of photonic crystal structures on flexible organic light-emitting diodes using nanoimprint
|
Hsu, Quang-Cherng; Hsiao, Jian-Jia; Ho, Ting-Lin; Wu, Cheng-Da |
| 臺大學術典藏 |
2019-05-28T01:53:23Z |
Fabrication of photothermo-responsive drug-loaded nanogel for synergetic cancer therapy
|
Chang R.;Tsai W.-B.; Chang R.; Tsai W.-B. |
| 國立臺灣科技大學 |
2003 |
Fabrication of piezoelectric biochips with self-assembled alkanethiol layer and hydrocoating
|
Chen, H.M.;Lin, M.L.;Chen, S.H. |
| 中華大學 |
2009 |
Fabrication of Plano-convex Glass Lenses by Molding Process Using a Through-Hole WC/Co Plate as the Mold
|
簡錫新; Chien, H. H. |
| 中華大學 |
2009 |
Fabrication of Plano-convex Glass Lenses by Molding Process Using a Through-Hole WC/Co Plate as the Mold
|
馬廣仁; Ma, Kung-Jen |
| 臺大學術典藏 |
2018-09-10T15:00:34Z |
Fabrication of plasmonic cavity and indefinite metamaterial by laser-induced forward transfer
|
Wei Ting Chen; Ming Lun Tseng; Chun Yen Liao; Pin Chieh Wu; Shulin Sun; Yao-Wei Huang; Chia Min Chang; Lei Zhou; Ding-Wei Huang; Ai Qun Liu; Din Ping Tsai; Yi-Teng Huang,; DING-WEI HUANGet al. |
| 國立臺灣海洋大學 |
2012 |
Fabrication of plasmonic devices using femto-second laser-induced forward transfer technique
|
Tsai DP; Chang CM; Tseng ML; Chen BH; Huang YW; Chu CH; Chung KS; Liu YJ; Tsai HG; Chu NN; Huang DW; Chiang HP |
| 臺大學術典藏 |
2012-10 |
Fabrication of plasmonic devices using femtosecond laser-induced forward transfer technique
|
Chia Min Chang; Bo Han Chen; Yao-Wei Huang; Cheng Hung Chu; Kuang Sheng Chung; Yen Ju Liu; Hung Guei Tsai; Nien-Nan Chu; Ding-Wei Huang; Hai-Pang Chiang; Din Ping Tsai; Ming Lun Tseng,; DING-WEI HUANGet al. |
| 國立高雄應用科技大學 |
2006 |
Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold
|
Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Chang, J.-H. |
| 國立臺灣大學 |
2006 |
Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold
|
Chang, C.Y.; Yang, S.Y.; Huang, L.S.; Chang, J.H. |
| 國立臺灣大學 |
2006 |
Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold
|
Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Chang, J.-H. |
| 臺大學術典藏 |
2020-01-13T08:23:25Z |
Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold
|
Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Chang, J.-H.; SEN-YEU YANG |
| 國立高雄應用科技大學 |
2007 |
Fabrication of plastic microlens arrays using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film
|
Jiang, Liang-Ting;Huang, Tzu-Chien;Chiu, Chien-Ren;Chang, Chih-Yuan;Yang, Sen-Yeu |
| 臺大學術典藏 |
2020-01-13T08:23:24Z |
Fabrication of plastic microlens arrays using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film resist
|
Jiang, L.-T.; Huang, T.-C.; Chiu, C.-R.; Chang, C.-Y.; Yang, S.-Y.; SEN-YEU YANG |
| 元智大學 |
2012-08 |
Fabrication of Platinum Electrocatalysts on Carbon Nanotubes Using Atomic Layer Deposition for Proton Exchange Membrane Fuel Cells
|
T. Su; S.J. Liao; Chien-Te Hsieh; A. K. Roy; Y.-Y. Liu; D.-Y. Tzou; W.-Y. Chen |
| 元智大學 |
2013-12-25 |
Fabrication of Platinum Nanoparticles Decorated Pyridine-Based Polybenzimidazole-Carbon
|
Duanghathai Kaewsai; Yu-Chen Liu; Hsiu-Li Lin; Tzyy-Lung Yu |
| 臺大學術典藏 |
2021-01-27T07:49:46Z |
Fabrication of Platinum-Rhenium Nanoparticle-Decorated Porous Carbons: Voltammetric Sensing of Furazolidone
|
Veerakumar, P.;Sangili, A.;Chen, S.-M.;Pandikumar, A.;Lin, K.-C.; Veerakumar, P.; Sangili, A.; Chen, S.-M.; Pandikumar, A.; Lin, K.-C.; KING-CHUEN LIN |
| 臺大學術典藏 |
2018-09-10T06:20:31Z |
Fabrication of PLGA microvessel scaffolds with circular microchannels using soft lithography
|
Wang, G.-J.; Hsueh, C.-C.; Hsu, S.-H.; Hung, H.-S.; SHAN-HUI HSU |
| 中國醫藥大學 |
2007-09 |
Fabrication of PLGA Microvessel Scaffolds with Circular Microchannels Using Soft Lithography.
|
(Gou-Jen Wang)*;(Cheng-Chih Hsueh);(Shan-hui Hsu);洪慧珊(Huey-Shan Hung) |
| 朝陽科技大學 |
2024-05 |
Fabrication of poly (xylitol-citratesebacate) and strontium-doped mesoporous bioactive glass scaffold for tissue engineering application
|
Deepa, K.; Shalini, A.; Meenakshi, S.; Jaisankar, V.; Kalimuthu, Rajendran; Kalimuthu, Sivarasan; Song, Kwang Soup; Song, Huang-Mu; 羅煌木 |
| 國立成功大學 |
2016-10 |
Fabrication of poly(glycerol sebacate) fibrous membranes by coaxial electrospinning: Influence of shell and core solutions
|
You, Zhi-Rong; Hu, Ming-Hsien; Tuan-Mu, Ho-Yi; Hu, Jin-Jia |
