| 國立交通大學 |
2014-12-08T15:39:43Z |
Moisture resistance and thermal stability of fluorine-incorporation siloxane-based low-dielectric-constant material
|
Cheng, YL; Wang, YL; Wu, YL; Liu, CP; Liu, CW; Lan, JK; O'Neil, ML; Ay, C; Feng, MS |
| 國立成功大學 |
2004-01-30 |
Moisture resistance and thermal stability of fluorine-incorporation siloxane-based low-dielectric-constant material
|
Cheng, Y. L.; Wang, Y. L.; Wu, Y. L.; Liu, Chuan-Pu; Liu, C. W.; Lan, J. K.; O'Neil, M. L.; Ay, Chyung; Feng, M. S. |
| 國立暨南國際大學 |
2004 |
Moisture resistance and thermal stability of fluorine-incorporation siloxane-based low-dielectric-constant material?
|
吳幼麟; Wu, YL |
| 國立交通大學 |
2014-12-08T15:21:37Z |
Moisture uptake and dielectric property of methylsilsesquioxane/high-temperature porogen hybrids and porous low-k films
|
Che, Mu-Lung; Teng, Jun-Yuan; Lai, Po-Cheng; Leu, Jihperng |
| 南台科技大學 |
2006 |
Moisture-Barrier Properties of Carbon-coated Silicon Oxide Films
|
吳坤憲; Wen-Ray Chen; Hsiung-Ming Guo; Teen-Hang Meen; Kuen-Hsien Wu; Fuh-Shyang Juang; Chien-Jung Huang |
| 國立交通大學 |
2014-12-08T15:41:07Z |
Moisture-induced material instability of porous organosilicate glass
|
Chang, TC; Chen, CW; Liu, PT; Mor, YS; Tsai, HM; Tsai, TM; Yan, ST; Tu, CH; Tseng, TY; Sze, SM |
| 國立中山大學 |
2003 |
Moisture-induced material instability of porous organosilicate glass
|
T.C. Chang;C.W. Chen;P.T. Liu;Y.S. Mor;H.M. Tsai;T.M. Tsai;S.T. Yan;C.H. Tu;T.Y. Tsing;S.M. Sze |
| 中原大學 |
2006-05 |
Moisture-Sensitive Device for the Determination of the Human Skin Moisture
|
黃鼎翔;周榮泉;孫台平;熊慎幹 ;Huang, Ting-Hsiang;Chou, Jung-Chuan;Sun, Tai-Ping;Hsiung, Shen-Kan |
| 朝陽科技大學 |
2014-06 |
MoJOE
|
侯咏妤;盧德容;歐素蓮;黃薇庭;龔姵燐 |
| 國立政治大學 |
2012 |
Mokken尺度量表下潛在特質排序之正確率探討
|
黃雅雯; Huang, Ya Wen |
| 朝陽科技大學 |
2011-07-30 |
MOKOSHOP假髮專賣店形象設計
|
周智柔; 黃佩茹 |
| 中原大學 |
2009-12 |
Molar Heat Capacity and Electrolytic Conductivity of Aqueous Solutions of [Bmim][MeSO4] and [Bmim][triflate]
|
Pei-Yin Lin;Allan N. Soriano;Alvin R. Caparanga;Meng-Hui Li |
| 國立東華大學 |
2005 |
Molar mass and molar mass distribution of polystyrene size standards
|
Peng, W.-P.; Y.-C. Yang; C.-W. Lin; H.-C. Chang |
| 國立臺灣科技大學 |
2011 |
Molar ratio mixture design for optimising compressive strength of kaolinitic cement
|
Hwang, C.L.;Kuo, C.K.;Wang, E.H. |
| 臺大學術典藏 |
2022-05-14T23:35:57Z |
Molar space closure: To do or not to do?
|
Ratanasereeprasert, Nutthakarn; Weng, Chu Yin; Yang, Stella Ya Hui; YI-JANE CHEN; JANE CHUNG-CHEN YAO |
| 國立臺灣大學 |
2006 |
Mold Allergen, Pen C 13, Induce Inflammatory Cytokines in Human Bronchial Epithelial Cells Via Activation of Protease-Activated Receptor
|
周綠蘋; CHOW, LU-PING |
| 臺大學術典藏 |
2018-09-10T06:25:22Z |
Mold allergen, Pen c 13, induces IL-8 expression in human airway epithelial cells by activating protease-activated receptor 1 and 2
|
Chiu, L.-L. and Perng, D.-W. and Yu, C.-H. and Su, S.-N. and Chow, L.-P.; LU-PING CHOW |
| 臺大學術典藏 |
2020-01-22T04:47:58Z |
Mold allergen, Pen c 13, induces IL-8 expression in human airway epithelial cells by activating protease-activated receptor 1 and 2
|
Perng D.-W.; Chiu L.-L.; Yu C.-H.; Su S.-N.; LU-PING CHOW |
| 國立臺灣大學 |
2007-04 |
Mold allergen, pen C 13, induces IL-8 expression in human airway epithelial cells by activating protease-activated receptor 1 and 2.
|
Chiu, LL; Perng, DW; Yu, CH; Su, SN; Chow, LP. |
| 國立臺灣科技大學 |
2001 |
Mold Fabrication and Modification Using Hybrid Processes of Selective Laser Cladding and Milling Operation
|
Jeng, J. Y. ;Lin, M.C. |
| 國立臺灣大學 |
2003 |
Mold Filling Analysis in Evaporative Pattern Casting Process for Aluminum Alloy and Its Experimental Validation
|
Kuo, J. H.; Chen, J. C.; Hwang, W. S.; Pan, E. N. |
| 國立成功大學 |
2003-10 |
Mold filling analysis in lost foam casting process for aluminum alloys and its experimental validation
|
Kuo, Jer-Haur; Chen, Jui-Ching; Pan, Yung-Ning; Hwang, Weng-Sing |
| 國立臺灣大學 |
2003 |
Mold Filling Analysis in Lost Foam Casting process for Aluminum Alloys and Its Experimental Validation
|
Kuo, J. H.; Chen, J. C.; Pan, Y. N.; Hwang, W. S. |
| 國立臺灣大學 |
2001 |
Mold Filling Behavior in Vertical Gating Lost Foam Aluminum Alloy
|
Pan, E. N.; Sheu, G. L. |
| 國立成功大學 |
2021-07 |
Mold Flow Analysis of Motor Core Gluing with Viscous Flow Channels and Dipping Module
|
Zeng;Yong-Jie;Hwang;Sheng-Jye;Liu;Yu-Da;Huang;Chien-Sheng |
| 臺大學術典藏 |
2018-09-10T08:46:50Z |
Mold-based compartment shielding to mitigate the intra-system coupled noise on SiP modules
|
C.-Y. Hsiao; C.-H. Huang; C.-D. Wang; K.-H. Liao; C.-H. Shen; C.-C. Wang; T.-L. Wu; TZONG-LIN WU |
| 國立成功大學 |
2017-04-05 |
Molded container for tissue scaffolds
|
Guo, How-Ran (TW);Chen, Chao-Lin (TW);Hu, Jin-Jia (TW) |
| 淡江大學 |
2016-04-01 |
Moldex3D光學模組之流變學理論與實驗研究
|
林國賡 |
| 中原大學 |
2004-05 |
Molding Analysis for Underfill of Flip-Chip Packages
|
W. R. Jong;S. C. Chen;C. C. Lai;T. H. Kuo;H. W. Liu;S. Ho;W. Y. Lo |
| 國立臺灣海洋大學 |
2010-08 |
Molding and hot forming techniques for fabricating plastic aspheric lenses with high blue-light transmittance
|
Kuo-Yung Hung;Yi-Ko Chen;Shih-Hao Huang;Der-Chi Shye |
| 中華大學 |
2012 |
Molding of Al2O3-coated chalcogenide glass lenses
|
簡錫新; Chien, H. H. |
| 國立臺灣科技大學 |
2016 |
Molding of Bone Mimicry from Hydroxyapatite and Agarose
|
黃愛蘭 |
| 國立臺灣大學 |
2005 |
Molding of thin sheets using impact micro-injection molding
|
Nian, S. C.; Yang, S. Y. |
| 臺大學術典藏 |
2020-01-13T08:23:26Z |
Molding of thin sheets using impact micro-injection molding
|
Nian, S.C.; Yang, S.Y.; SEN-YEU YANG |
| 臺大學術典藏 |
2022-04-21T23:17:19Z |
Molding of Thin Sheets Using Impact Micro-injection Molding
|
Nian, S. C.; Yang, S. Y. |
| 淡江大學 |
2012 |
Molding Plano-Convex Lenses Using a through-Hole WC-Co Plate as the Mold
|
Ma, Kung-Jeng; Chien, Hsi-Hsin; Huang, Jing-Kung; Chao, Choung-Lii |
| 中華大學 |
2012 |
Molding Plano-convex Lenses Using A Through-Hole WC/Co Plate as The Mold
|
馬廣仁; Ma, Kung-Jen |
| 中華大學 |
2012 |
Molding Plano-convex Lenses Using A Through-Hole WC/Co Plate as The Mold
|
簡錫新; Chien, H. H. |
| 中華大學 |
2012 |
Molding Plano-convex Lenses Using a Through-Hole WC/Co Plate as the Mold
|
簡錫新; Chien, H. H. |
| 國立交通大學 |
2014-12-16T06:15:32Z |
Molding structure with independent thermal control and its molding method
|
Chen, Ren Haw; Liou, An Cheng |
| 中國醫藥大學 |
2011-07 |
Molds, Parental Atopy and Pediatric Incident Asthma
|
黃彬芳(Bing-Fang Hwang)*; 劉宜萍(I-Ping Liu); 黃姿碧(Tzu-Pi Huang) |
| 高雄醫學大學 |
2007 |
Molecular & Cellular Neuroscience Perspectives
|
楊淵韓 |
| 臺大學術典藏 |
2018-09-10T04:45:43Z |
Molecular (Sub) grouping of endosymbiont Wolbachia infection among mosquitoes of Taiwan
|
Tsai, K.-H.;Lien, J.-C.;Huang, C.-G.;Wu, W.-J.;Chen, W.-J.; KUN-HSIEN TSAI |
| 臺大學術典藏 |
2022-03-30T08:21:36Z |
Molecular (Sub) grouping of endosymbiont Wolbachia infection among mosquitoes of Taiwan
|
KUN-HSIEN TSAI; Lien J.-C.; Huang C.-G.; Wu W.-J.; Chen W.-J. |
| 國立臺灣大學 |
2004 |
Molecular (sub-)grouping of the endosymbiont Wolbachia infection among mosquitoes of Taiwan
|
Tsai, Kun-Hsien; Hwang, Chin-Gi; Lien, Jih-Ching; Wu, Wen-Jer; Chen, Wei-June |
| 輔英科技大學 |
2010-11-12 |
Molecular / Mechanical Dynamics Simulations with Nonholonomic Constraints
|
張簡文添 |
| 國立彰化師範大學 |
2007-10 |
Molecular Action Mechanism Against Apoptosis by Aqueous Extract from Guava Budding Leaves Elucidated with Human Umbilical Vein Endothelial Cell (HUVEC) Model
|
Hsieh, Chiu-Lan; Huang, Chien-Ning; Lin, Yuh-Charn; Peng, Robert Y. |
| 淡江大學 |
1995-11-01 |
Molecular actions of local anesthetics in pig brain and spinal cord
|
簡素芳; Chien, Su-fang; Yen, F. S.; Chang, C. P.; Lin, C. T. |
| 臺大學術典藏 |
2006 |
Molecular Adsorption at Silica/CH3CN Interface Probed by Using Evanescent Wave Cavity Ring-Down Absorption Spectroscopy: Determination of Thermodynamic Properties
|
Fan, Hsiu-Fang; Hung, Chien-Yi; Lin, King-Chuen; Hung, Chien-Yi; Lin, King-Chuen; Fan, Hsiu-Fang |
| 臺大學術典藏 |
2018-09-10T05:56:44Z |
Molecular adsorption at silica/CH3CN interface probed by using evanescent wave cavity ring-down absorption spectroscopy: Determination of thermodynamic properties
|
Fan, H.-F.;Hung, C.-Y.;Lin, K.-C.; Fan, H.-F.; Hung, C.-Y.; Lin, K.-C.; KING-CHUEN LIN |
