| 國立中山大學 |
1994 |
Optimum Design of Milling Cutters for Machining Archimedean Variable Pitch Helicoids
|
J.Y. Liu;H.H. Chen |
| 國立中山大學 |
1993-11-10 |
Optimum Design of Milling Cutters for Machining Archimedean Variable Pitch Helicoids
|
J.Y. Liu;H.H. Chen |
| 國立中山大學 |
1993-12-18 |
Optimum Design of Milling Cutters for Machining Conical Variable Pitch Helicoids
|
J.Y. Liu;H.S. Yan;H.H. Chen |
| 淡江大學 |
1991-10 |
Optimum design of multiple configuration structures for frequency constraints
|
Wang, B. P.; Chang, Y. K.; Lawrence, K. L.; Chen, T. Y. |
| 淡江大學 |
1995-12 |
Optimum Design of Multiple Configurations Structure for Multiple Type Constraints
|
張永康; Chang, Yeong-kang |
| 大葉大學 |
2004-02 |
Optimum design of multiple intersecting spheres deep-submerged pressure hull
|
Liang, Cho-Chung;Shiah, Sheau-Wen;Jen, Chan-Yung;Chen, Hung-Wen;Liang, cho-chung |
| 南台科技大學 |
2002-12-13 |
Optimum design of natural-ciculation solar-water-heater by Taguchi method
|
李友竹; S. M. Lu; Y. C. M. Li; J. C. Tang |
| 南台科技大學 |
2003-06 |
Optimum design of natural-circulation solar-water-heater by the Taguchi method
|
李友竹; S. M. Lu ; Y. C. M. Li; J. C. Tang |
| 淡江大學 |
2000-11 |
Optimum design of PID controllers
|
蕭瑛東 |
| 淡江大學 |
2009-12 |
Optimum Design of Piezoelectric Laminated Composite Structures by Method of Moving Asymptotes
|
應宜雄; Chang, Y.K.; Chen, J.W.; Chiu, C.C. |
| 中華大學 |
2004 |
optimum design of Si doping for emission enhancement of InGaN/GaN quantum well light emitting devices
|
馬廣仁; Ma, Kung-Jen |
| 國立臺灣大學 |
2004 |
Optimum design of silicon doping for emission enhancement of InGaN/GaN quantum well light-emitting devices
|
Cheng, Yung-Chen; Lin, En-Chiang; Chen, Meng-Kuo; Wu, Cheng-Ming; Yang, C.C.; Ma, Kung-Jen |
| 臺大學術典藏 |
2018-09-10T04:49:37Z |
Optimum design of silicon doping for emission enhancement of InGaN/GaN quantum well light-emitting devices
|
Cheng, Y.-C.;Lin, E.-C.;Chen, M.-K.;Wu, C.-M.;Yang, C.C.;Ma, K.-J.; Cheng, Y.-C.; Lin, E.-C.; Chen, M.-K.; Wu, C.-M.; Yang, C.C.; Ma, K.-J.; CHIH-CHUNG YANG |
| 淡江大學 |
2017-12-09 |
Optimum Design of Structures by Bat Algorithm
|
Chang, Yeong-Kang;Ing, Yi-Shyong;Chen, Xuan-Guang;Hung, Chien-Chun |
| 淡江大學 |
2012-11 |
Optimum design on membrane filtration system for separation of bioethanol fermentation broth
|
黃國楨; Hwang, K.J.; Ku, C.Y.; Chou, S.P. |
| 修平科技大學 |
2006 |
Optimum design parameters of Pin-Fin heat sink using the grey-fuzzy logic based on the orthogonal arrays
|
Ko-Ta Chiang;Fu-Ping Chang;Te-Chang Tsai |
| 國立政治大學 |
2010 |
Optimum detection location-based cooperative spectrum sensing in cognitive radio
|
Zhang, H.;Wang, X.;Kuo, G.-S.;Bohnert, T.M.; 郭更生 |
| 國立交通大學 |
2014-12-08T15:46:55Z |
Optimum detection of quantum entangled fiber solitons
|
Lai, Yinchieh; Lee, Ray-Kuang |
| 國立臺灣大學 |
2005 |
Optimum Diffusion Encoding Steps for Fiber Tractography
|
Lee, S-P.; Chen, C-M.; Weng, J-C.; Tseng, W-Y.I. |
| 國立臺灣大學 |
1991 |
Optimum Discriminatory Tariffs under Oligopolistic Competition
|
Hwang, Hong; Mai, Chao-Cheng |
| 國立臺灣科技大學 |
2009 |
Optimum Drafting Conditions of Bamboo Charcoal-modified Fiber Blended Yarn Obtained by Drafting Behavior Analysis
|
Su, C.I.;Lin, X.R. |
| 國立臺灣科技大學 |
2006 |
Optimum drafting conditions of non-circular polyester and cotton blend yarns
|
Su, C.-I.;Fang, J.-X. |
| 國立臺北護理健康大學 |
2017 |
Optimum drop jump height in Division III athletes- under 75% of vertical jump height
|
Peng, Hsien-Te;Khuat, Cong Toai;Thomas, W.Kernozek;Brian, J.Wallace;Lo, Shin-Liang;Song, Chen-Yi |
| 中國文化大學 |
2017-10 |
Optimum Drop Jump Height in Division III Athletes: Under 75 % of Vertical Jump Height
|
Peng, HT (Peng, Hsien-Te); Khuat, CT (Cong Toai Khuat); Kernozek, TW (Kernozek, Thomas W.); Wallace, BJ (Wallace, Brian J.); Lo, SL (Lo, Shin-Liang); Song, CY (Song, Chen-Yi) |
| 國立臺灣科技大學 |
2018 |
Optimum dynamic characteristic control approach for building mass damper design
|
Wang S.-J.; Lee B.-H.; Chuang W.-C.; Chang K.-C. |
| 臺大學術典藏 |
2021-08-05T02:36:50Z |
Optimum dynamic response control approach for building mass damper design
|
Wang S.J;Lee B.H;Chuang W.C;Lin W.C;Chang K.C;Hwang J.S.; Wang S.J; Lee B.H; Chuang W.C; Lin W.C; Chang K.C; Hwang J.S.; KUO-CHUN CHANG |
| 國立交通大學 |
2017-04-21T06:49:04Z |
Optimum Electric Cable Selection for Kite-like Unmanned Aerial Vehicle
|
Wang, Ko-Yuan; Lee, Pei-Hsuan; Hung, Shao-Kang |
| 國立交通大學 |
2014-12-08T15:06:40Z |
Optimum electrostatic force control for fabricating a hybrid UV-curable aspheric lens
|
Hung, Kuo-Yung; Chang, Liang-Wei; Tseng, Fan-Gang; Chiou, Jin-Chern; Chiu, Yi |
| 國立東華大學 |
2004 |
Optimum Equilibria for High Performance, Steady State Tokamaks
|
Lin-Liu, Y.R.; R.D. Stambaugh |
| 國立東華大學 |
2004 |
Optimum Equilibria for High Performance, Steady State Tokamaks
|
Lin-Liu, Y.R.; R.D. Stambaugh |
| 國立交通大學 |
2014-12-08T15:14:04Z |
Optimum evaluation for electron beam weldments of AZ61A-F extruded plates
|
Chi, Chao-Ting; Chao, Chuen-Guang |
| 淡江大學 |
1998-12 |
Optimum fabrication conditions of nickel-idiffused lithium niobate optical waveguides at a wavelength of 1.3μm
|
Sue, Chao-yung; Ko, Chih-hui; Fang, Jiang-duh; Wang, Tzyy-jiann; 張文清; Chang, Wen-ching |
| 義守大學 |
2007-11 |
Optimum Fault Current Limiter Placement
|
Jen-Hao Teng; Chan-Nan Lu |
| 義守大學 |
2010-04 |
Optimum fault current limiter placement with search space reduction technique
|
J.-H. Teng; C.-N. Lu |
| 淡江大學 |
1984-07 |
Optimum Firm Location Under Factor-Price Uncertainty
|
麥朝成; Mai, Chao-cheng |
| 國立臺灣大學 |
1984-09 |
Optimum Firm Location Under Factor-Price Uncertainty
|
麥朝成; Mai, Chao-Cheng |
| 淡江大學 |
2006 |
Optimum flight trajectory study under the influence of wake vortices
|
邱德溢; Chiu, Te-yi |
| 國立交通大學 |
2014-12-08T15:02:14Z |
Optimum gain-equalised configuration of wideband erbium-doped fibre amplifier using inter-stage samarium-doped fibre and midway isolator
|
Chen, YK; Liaw, SK |
| 臺大學術典藏 |
2001 |
Optimum Ge profile design for base transit time minimization of SiGe HBT
|
CHEE-WEE LIU; Lin, C.-H.; Liu, C.W.; Chang, S.T. |
| 國立臺灣大學 |
2001-12 |
Optimum Ge profile design for base transit time minimization of SiGe HBT
|
Chang, S.T.; Liu, C.W.; Lin, C.H. |
| 國立臺灣科技大學 |
2012 |
Optimum heat treatment conditions for PAN-based oxidized electrospun nonwovens
|
Su, C.-I.;Jiang, Z.-Y.;Lu, C.-H. |
| 國立臺灣科技大學 |
2010 |
Optimum horn antenna design based on an integration of HFSS commercial code and genetic algorithms for the feed application of reflector antennas
|
Chou H.-T.; Liu C.-W.; Chou H.-H.; Liao W.-J. |
| 元智大學 |
2010-02 |
Optimum Horn Antenna Design based on an Integration of HFSS Commercial Code and Genetic Algorithms for the Feed Application of Reflector Antennas
|
周錫增; Chia-Wei Liu; Hsi-Hsir Chou; Wen-Jiao Liao |
| 元智大學 |
2010-02 |
Optimum Horn Antenna Design based on an Integration of HFSS Commercial Code and Genetic Algorithms for the Feed Application of Reflector Antennas
|
周錫增; Chia-Wei Liu; Hsi-Hsir Chou; Wen-Jiao Liao |
| 臺大學術典藏 |
2018-09-10T08:15:05Z |
Optimum horn antenna design based on an integration of HFSS commercial code and genetic algorithms for the feed application of reflector antennas
|
Chou, H.-T.;Liu, C.-W.;Chou, H.-H.;Liao, W.-J.; Chou, H.-T.; Liu, C.-W.; Chou, H.-H.; Liao, W.-J.; HSI-TSENG CHOU |
| 大葉大學 |
2007 |
Optimum immobilization of Candida rugosa lipase on celite by RSM
|
Chang, Shuo-Fen;Chang, Shu-Wei;Yen, Yue-Horng;Shieh, Chwen-Jen |
| 大葉大學 |
2007-01 |
Optimum immobilization of Candida rugosa lipase on celite by RSM
|
Chang, S.-F.;Chang, S.-W.;Yen, Y.-H.;Shieh, C.-J. |
| 大葉大學 |
2007-06 |
Optimum immobilization of Candida rugosa lipase on Celite by RSM
|
Chang, Shuo-Fen;Chang, Shu-Wei;Yen, Yue-Horng;Shieh, Chwen-Jen |
| 中國文化大學 |
2008-07-01 |
Optimum injection molding processing condition on EMI shielding effectiveness of stainless steel fiber filled polycarbonate composite
|
陳為仁;陳俊生;陳夏宗;簡仁德 |
| 南亞技術學院 |
2008-07 |
Optimum injection molding processing condition on EMI shielding effectiveness of stainless steel fiber filled polycarbonate composite
|
Chen, Chun-Sheng; Chen, Wei-Ren; Chen, Shia-Chung; Chien, Rean-Der |
