| 國立成功大學 |
2017-11-1 |
Optimum parameter design for performance of methanol steam reformer combining Taguchi method with artificial neural network and genetic algorithm
|
Ouyang;Kwan;Wu;Horng-Wen;Huang;Shun-Chieh;Wu;Sheng-Ju |
| 中原大學 |
2002-12 |
Optimum Parameters of Specific 7.5 Hz Single Pulsed Electromagnetic Field Stimulation on Osteoblast Growth
|
Jimmy Li;Walter Hong-Shong Chang;Huei Wen Jan;Rouh Chyu Ruaan;Hwa Chang Liu;Jui-Sheng Sun |
| 臺大學術典藏 |
2018-09-10T04:24:18Z |
Optimum Parameters of Specifie 7.5 Hz Single Pulsed Electromagnetic Field Stimulation on Osteoblast Growth
|
Li, J. and Chang, W.H.-S. and Jan, H.W. and Ruaan, R.C. and Liu, H.C. and Sun, J.-S.; JUI-SHENG SUN |
| 臺大學術典藏 |
2020-02-07T03:43:48Z |
Optimum Parameters of Specifie 7.5 Hz Single Pulsed Electromagnetic Field Stimulation on Osteoblast Growth
|
Li J.;Chang W.H.-S.;Jan H.W.;Ruaan R.C.;Liu H.C.;Jui-Sheng Sun; Li J.; Chang W.H.-S.; Jan H.W.; Ruaan R.C.; Liu H.C.; JUI-SHENG SUN |
| 國立臺灣科技大學 |
2015 |
Optimum parameters of the continuous process of electrospun nanofibrous yarn
|
Su, C.-I.;Liu, Y.-S.;Hsu, C.-H.;Lee, J.-Y.;Lu, C.-H. |
| 國立屏東大學 |
2010 |
Optimum Parametric Study of Direct Methanol Fuel Cell
|
施焜燿;林明農;程亞鵬;邱振平;李珍蕙;柯怡妏 |
| 中華大學 |
2011 |
Optimum Partition for Distant Charging in Wireless Sensor Networks
|
俞征武; Yu, Chang Wu |
| 中華大學 |
2011 |
Optimum Partition for Distant Charging in Wireless Sensor Networks
|
歐陽雯; Ouyang, Wen |
| 元智大學 |
2009-01 |
Optimum phase image selection for 3D rotational coronary angiography
|
林建仲; 郭文嘉 |
| 大葉大學 |
2002-09 |
Optimum Placement and Control of Active Constrained Layer Damping Using Modal Strain Energy Approach
|
Ro, Jeng-Jong |
| 元智大學 |
2007-11 |
Optimum plannar antenna design based on an integration of IE3D commercial code and optimization algorithms
|
周錫增; Hou, Yuan-Chang; Liao, Wen-Jiao |
| 臺大學術典藏 |
2018-09-10T06:31:14Z |
Optimum plannar antenna design based on an integration of IE3D commercial code and optimization algorithms
|
Chou, H.-T.; Hou, Y.-C.; Liao, W.-J.; HSI-TSENG CHOU |
| 淡江大學 |
2003-01 |
Optimum Plate Spacing for the Best Performance of the Enrichment of Heavy Water in Thermal Diffusion Columns of a Countercurrent-Flow Frazier Scheme
|
葉和明; Yeh, Ho-ming |
| 淡江大學 |
2004-07 |
Optimum plate spacing for the best recovery of deuterium from water–isotopes mixture in flate-plate thermal-diffusion columns with total expense fixed
|
葉和明; Yeh, Ho-ming |
| 淡江大學 |
1996-11 |
Optimum Plate-Spacing for the Best Performance of the Enrichment of Heavy Water in Flat-Plate Thermal-Diffusion Columns of the Frazier Scheme
|
葉和明; Yeh, Ho-ming |
| 國立臺灣科技大學 |
2006 |
Optimum policies for a system with general imperfect maintenance
|
Sheu, S.-H.;Lin, Y.-B.;Liao, G.-L. |
| 國立台東大學 |
2006/3 |
Optimum Policies for a System with General Imperfect Maintenance
|
Shey-Huei Sheu, Yuh-Bin Lin, and Gwo-Liang Liao |
| 國立臺灣大學 |
2005 |
Optimum Position of Metatarsal Pad in Metatarsalgia for Pressure Relief
|
施偉立; 康峻宏; HSI, WEI-LI; KANG, JIUNN-HORNG |
| 國立臺灣大學 |
2005-06 |
OPTIMUM POSITION OF METATARSAL PAD IN METATARSALGIA FOR PRESSURE RELIEF
|
施偉立; 康峻宏 |
| 國立臺灣大學 |
2005-06 |
OPTIMUM POSITION OF METATARSAL PAD IN METATARSALGIA FOR PRESSURE RELIEF
|
施偉立; 康峻宏 |
| 國立交通大學 |
2014-12-08T15:14:50Z |
Optimum power-saving method for power MOSFET width of DC-DC converters
|
Chen, K.-H.; Chien, C.-C.; Hsu, C.-H.; Huang, L.-R. |
| 國立交通大學 |
2014-12-08T15:24:55Z |
Optimum power-saving method for power MOSFET width of one-cycle control DGDC converters
|
Chen, Ke-Horng; Chien, Chieh-Ching; Ho, Hsin-Hsin; Huang, Li-Ren |
| 元智大學 |
Jan-23 |
Optimum precursor stacking sequence of Cu2ZnSnSe4 thin film solar cell in selenium atmosphere
|
Fang-I Lai; Jui-Fu Yang; Wei-Chun Chen; Yu-Chao Hsu; Shou-Yi Kuo |
| 南台科技大學 |
2006-05 |
Optimum process mean for a one-sided specification limit product considering manufacturing cost and quadratic quality loss考量製造成本與二次品質損失的單邊規格界限產品最佳製程平均數設定
|
陳忠和; Chung-Ho Chen; Kuo-Wei Huang |
| 南台科技大學 |
2005-09 |
Optimum process mean setting for multi-stage serial production system under considering quality loss function
|
陳忠和; Jung-Chen Chen and Chung-Ho Chen |
| 南台科技大學 |
2006-06 |
Optimum process mean setting under the membership function
|
陳忠和; Chung-Ho Chen |
| 臺大學術典藏 |
1988 |
Optimum Processing Conditions for the Purification of the YBa2Cu307 Oxide Powder by Sedimentation
|
吳乃立; Ruckenstein, Eli; Wu, Nae-Lih; Sanjeeve, N.; Ruckenstein, Eli; Sanjeeve, N.; Ruckenstein, Eli; Wu, Nae-Lih |
| 國立臺灣大學 |
1988 |
Optimum Processing Conditions for the Purification of the YBa2Cu307 Oxide Powder by Sedimentation
|
Sanjeeve, N.; Ruckenstein, Eli; 吳乃立; Sanjeeve, N.; Ruckenstein, Eli; Wu, Nae-Lih |
| 臺大學術典藏 |
2020-01-06T03:10:56Z |
Optimum processing conditions for the purification of the YBa2Cu3O7-x powder by the sedimentation method
|
Narain, S.; Wu, N.L.; Ruckenstein, E.; NAE-LIH WU |
| 國立臺灣科技大學 |
2019 |
Optimum processing parameters of sueding fabric comfort by applying the Taguchi method and fuzzy theory
|
Kuo, C.-F.J.;Lin, W.-T. |
| 育達商業科技大學 |
2007 |
Optimum Production Control and Workforce Scheduling of Machining Project
|
羅智耀;侯成一;藍天雄 |
| 育達商業科技大學 |
2008 |
Optimum Production Layout under Space Constraint
|
T.S. Lan |
| 南台科技大學 |
2006-06 |
Optimum production length and process mean setting
|
陳忠和; Chung-Ho Chen |
| 大葉大學 |
2008-11 |
Optimum production of trehalose by immobilized Picrophilus torridus trehalose synthase.
|
Chang, Shu-Wei;Chou, Hsin-Hung;Lee, Guan-Chiun;Shaw, Jei-Fu |
| 育達商業科技大學 |
2007 |
Optimum Production Planning Model under Probabilistic Market Demand
|
藍天雄;羅智耀 |
| 南台科技大學 |
2008-08-07~09 |
Optimum production run length and target value setting for a filling process
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2008-01 |
Optimum production run length and warranty period setting for the imperfect production system
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-08 |
Optimum production run length and warranty period setting for the imperfect production system
|
陳忠和; Chung-Ho Chen |
| 淡江大學 |
1978-08 |
Optimum PWM inverter drives for induction motors
|
Shiu, Yuan-yih; 許源裕; Yang, Wei-tzen; 楊維楨 |
| 國立臺灣海洋大學 |
2013 |
Optimum quantizing of monotonic nondecreasing arrays
|
William Wei-Yuan Hsu; Cheng-Yu Lu; Ming-Yang Kao; Jan-Ming Ho |
| 國立臺灣海洋大學 |
2013 |
Optimum quantizing of monotonic nondecreasing arrays
|
William Wei-Yuan Hsu; Cheng-Yu Lu; Ming-Yang Kao; Jan-Ming Ho |
| 嘉南藥理大學 |
2019 |
Optimum recovery of phosphate from simulated wastewater by unseeded fluidized-bed crystallization process
|
Pahunang, Rekich R.; Ballesteros, Florencio C., Jr.; de Luna, Mark Daniel G.; Vilando, Anabella C.; Lu, Ming-Chun |
| 國立臺灣科技大學 |
2020 |
Optimum replacement policy for cumulative damage models based on multi-attributes
|
Sheu, Sheu S.-H.;Liu, T.-H.;Zhang, Zhang Z.-G.;Tsai, H.-N. |
| 亞洲大學 |
2020-01-20 |
Optimum Replacement Policy for Cumulative Damage Models Based on Multi-Attributes
|
徐世輝; SHEU, SHEY-HUEI; Liu, Tzu-Hsin; Zhe-George, Zhe-George Z; Zhang, Zhe-George; Tsa, Hsin-Nan; Tsai, Hsin-Nan |
| 南台科技大學 |
1986 |
Optimum Replacement Policy for Multi-Tool Operations
|
陳茂生;賴明材 |
| 國立成功大學 |
2009-05 |
Optimum sample size allocation to minimize cost or maximize power for the two-sample trimmed mean test
|
Guo, Jiin-Huarng; Luh, Wei-Ming |
| 國立屏東大學 |
2009 |
Optimum sample size allocation to minimize cost or maximize power for the two-sample trimmed mean test.
|
郭錦煌;Guo, J.H.,;Luh, W.M. |
| 臺大學術典藏 |
2020-03-02T06:39:56Z |
Optimum sampling for track PEB CD integrated metrology
|
Chen, A.; Hsueh, S.; Blue, J.; ARGON CHEN |
| 臺大學術典藏 |
2020-03-02T06:40:11Z |
Optimum sampling for track PEB CD integrated metrology
|
Chen, A.; Hsueh, S.; Blue, J.; JAKEY BLUE |
| 淡江大學 |
1978-04 |
Optimum scheduling of power generation
|
Yang, Wei-tzen; 楊維楨 |
