| 國立臺灣科技大學 |
2015 |
Wear and friction characteristics of surface-modified aluminium alloys
|
Lin, Y.-C.;Chen, J.-N.;Huang, Y.-C.;Jian, Y.-H. |
| 大葉大學 |
2010-01 |
Wear and immersion corrosion of Ni-P electrodeposit in NaCl solution
|
Lee, Hung-Bin;Wuu, D. S.;Lee, C. Y.;Lin, C.S. |
| 國立臺灣大學 |
2010 |
Wear and immersion corrosion of Ni-P electrodeposit in NaCl solution
|
Lee, H.B.; Wuu, D.S.; Lee, C.Y.; Lin, C.S. |
| 國立臺灣海洋大學 |
2010-01 |
Wear and immersion corrosion of Ni-P electrodeposit in NaCl solution
|
H. B. Lee; D. S. Wuu; C. Y. Lee; C.S. Lin |
| 臺大學術典藏 |
2022-02-14T23:56:19Z |
Wear and leakage assessments of canted coil Spring–Energized polytetrafluoroethylene seals under Ultra-High cycle operations
|
Huang, T. C.; Tsai, J. W.; Liao, K. C. |
| 臺大學術典藏 |
2022-04-25T03:57:27Z |
Wear and leakage assessments of canted coil Spring–Energized polytetrafluoroethylene seals under Ultra-High cycle operations
|
Huang T.-C;Tsai J.-W;Liao K.-C.; Huang T.-C; Tsai J.-W; Liao K.-C.; KUO-CHI LIAO |
| 國立交通大學 |
2019-04-03T06:41:19Z |
Wear Behavior and Microstructure of Mg-Sn Alloy Processed by Equal Channel Angular Extrusion
|
Chen, Jung-Hsuan; Shen, Yen-Chen; Chao, Chuen-Guang; Liu, Tzeng-Feng |
| 國立臺灣大學 |
2008 |
Wear Behavior in Turning High Hardness Alloy Steel by CBN Tool
|
Lin, H.M.; Liao, Y.S.; Wei, C.C. |
| 臺大學術典藏 |
2020-01-13T08:25:32Z |
Wear behavior in turning high hardness alloy steel by CBN tool
|
Lin, H.M.; Liao, Y.S.; Wei, C.C.; YUNN-SHIUAN LIAO |
| 國立成功大學 |
2005-11 |
Wear behavior of DC unbalanced magnetron sputter deposited ZrCN films
|
Yao, Shun-Hui; Su, Yean-Liang; Kao, Wen-Hsien; Cheng, Kai-Wen |
| 國立臺灣海洋大學 |
2011-08 |
Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication
|
Chau-Chang Chou;Shing-Hoa Wang;Hsien-Hung Chung;Peter K. Liaw;Yung Liou;J.C. Huang;Yuan-Yi Hsu |
| 國立臺灣海洋大學 |
2016-11 |
Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes
|
Yung-Sheng Lin; Chih-Feng Hsu; Jyun-Yu Chen; Yeh-Ming Cheng; Pee-Yew Lee |
| 中國文化大學 |
2002 |
Wear behavior of nitrocarburized JIS SKD61 tool steel
|
Chiu L.H.; Wu C.H.; Chang H |
| 國立臺灣海洋大學 |
2015 |
Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel
|
Tai-Cheng Chen;Chau-Chang Chou;Tung-Yuan Yung;Kun-Chao Tsai;Jiunn-Yuan Huang |
| 國立臺灣海洋大學 |
2016-10 |
Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel.
|
Tai-Cheng Chen;Chau-Chang Chou;Tung-Yuan Yung;Kun-Chao Tsai;Jiunn-Yuan Huang |
| 國立臺灣大學 |
2004-12 |
Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
|
Cho, H. J.; Wei, W. J.; Kao, H. C.; Cheng, C. K. |
| 臺大學術典藏 |
2020-05-12T02:54:21Z |
Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
|
Cho, H.J.; Wei, W.J.; Kao, H.C.; Cheng, C.K.; WEN-CHENG J. WEI |
| 國立交通大學 |
2014-12-08T15:04:33Z |
WEAR BEHAVIOR OF VARIOUS DIAMOND-COATED CUTTING TOOLS UNDER DIFFERENT DEPOSITION CONDITIONS
|
HUANG, TH; KUO, CT; LIN, TS; CHANG, CS |
| 臺大學術典藏 |
2008 |
Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool
|
LiaoYS; Wei, C.C.; Liao, Y.S.; Wei, C.C.; Liao, Y.S. |
| 國立臺灣大學 |
2008 |
Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool
|
Liao, Y.S.; Wei, C.C. |
| 國立臺灣科技大學 |
2020 |
Wear Behaviour and Sustainability of Coated Abrasives in Grinding of Aluminium Alloy Using Minimum Quantity Lubrication
|
Kuo, C.;Yang, J.;Wen, J. |
| 國立臺灣科技大學 |
2018 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Kuo, C.;Wang, C.;Ko, S. |
| 國立臺灣海洋大學 |
2017-11 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Chunliang Kuo; Chihying Wang; Shunkai Ko |
| 國立臺灣科技大學 |
2018 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Kuo, C.;Wang, C.;Ko, S. |
| 臺大學術典藏 |
2018-09-10T07:31:09Z |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
YAO-YANG TSAI;Tsai, Y.Y.;Liao, Y.S.;Luo, S.Y.;YAO-YANG TSAI; Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y.; YAO-YANG TSAI |
