| 臺大學術典藏 |
2020-01-13T08:23:12Z |
Fabrication of a light-intensity-enhancement component by using computer-controlled ultraviolet curing and air-pressing imprinting
|
Yang, S.-Y.; SEN-YEU YANG; Chang, N.-W.; Ke, K.-C. |
| 國立成功大學 |
2018-02 |
Fabrication of a mechanically anisotropic poly(glycerol sebacate) membrane for tissue engineering
|
Hsu;Chi-Nung;Lee;Pei-Yuan;Tuan-Mu;Ho-Yi;Li;Chen-Yu;Hu;Jin-Jia |
| 國立臺灣海洋大學 |
2007 |
Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique
|
C. W. Wu；J. R. Tsai；H. Y. Tsai,；C. C. Hsiao |
| 國立臺灣科技大學 |
2016 |
Fabrication of a micro-tip array mold using a micro-lens mask with proximity printing
|
Lin, T.-H;Chao, Chao C.-K;Yang, H. |
| 國立臺灣科技大學 |
2007 |
Fabrication of a microlens array electroformed mold with low roughness and high hardness
|
Lin, T.-H.;Hung, S.-Y.;Yang, H.;Chao, C.-K. |
| 元智大學 |
Nov-15 |
Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology
|
Lin, Cheng-Yang; Cheng-Chih HSU; Dai, Ching-Liang |
| 臺大學術典藏 |
2001-09 |
Fabrication of a Micromachined Optical Modulator Using the CMOS Process
|
Chang, Pei-Zen; Chen, Hung-Lin; Dai, Ching-Liang; Dai, Ching-Liang; Chen, Hung-Lin; Chang, Pei-Zen |
| 國立臺灣大學 |
2001-09 |
Fabrication of a Micromachined Optical Modulator Using the CMOS Process
|
Dai, Ching-Liang; Chen, Hung-Lin; Chang, Pei-Zen |
| 國立東華大學 |
2006-02 |
Fabrication of a micromachined tunable capacitor using the complementary metal-oxide semiconductor post-process of etching metal layers
|
Wei,M.-K.; Chang,M.-W.; Dai,C.-L.; Liu,M.-C.; Hsu,H.-M. |
| 國立交通大學 |
2014-12-08T15:13:50Z |
Fabrication of a miniature CMOS-based optical biosensor
|
Ho, Wei-Jen; Chen, Jung-Sheng; Ker, Ming-Dou; Wu, Tung-Kung; Wu, Chung-Yu; Yang, Yuh-Shyong; Li, Yaw-Kuen; Yuan, Chiun-Jye |
| 臺北醫學大學 |
2006 |
Fabrication of A Moldable PLA/Chitosan/ACP Composite for GTR/GBR Applications
|
楊正昌; Teng NC; Yang JC; Chen CC; Laio CH; Huang CH; Lee SY |
| 臺北醫學大學 |
2006 |
Fabrication of a Moldable PLA/Chitosan/ACP Composite for GTR/GBR Applications.
|
李勝揚; 鄧乃嘉; Teng N-C; Yang J-C; Chen C-C; Laio C-H; Huang C-H; Lee S-Y |
| 國立臺灣大學 |
2009-06 |
Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system
|
Chen, PY; Nien, PC; Wu, CT; Wu, TH; Lin, CW; Ho, KC |
| 臺大學術典藏 |
2018-09-10T07:29:41Z |
Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system
|
Chen, P.-Y.;Nien, P.-C.;Wu, C.-T.;Wu, T.-H.;Lin, C.-W.;Ho, K.-C.; Chen, P.-Y.; Nien, P.-C.; Wu, C.-T.; Wu, T.-H.; Lin, C.-W.; Ho, K.-C.; CHII-WANN LIN; KUO-CHUAN HO |
| 中原大學 |
2001-04-17 |
Fabrication of a multi-structure ion sensitive field effect transistor with a pH sensing layer of a tin oxide thin film
|
Shen-Kan Hsiung;Jung-Chuan Chou;Wen-Yaw Chung;Tai-Ping Sun;Hung-Kwei Liao |
| 國立臺灣大學 |
2010 |
Fabrication of a nano/micro hybrid lens using gas-assisted hot embossing with an anodic aluminum oxide (AAO) template
|
Wu, Jing-Tang; Chang, Wei-Yi; Yang, Sen-Yeu |
| 國立臺灣科技大學 |
2018 |
Fabrication of a Nonplanar Microfluidics by Using Sonication-Assisted Dissolution Technique
|
Chen, P.-C.;Chou, Chou C.-C. |
| 國立成功大學 |
2014-11 |
Fabrication of a Novel Diplexer Using Folded Open-Loop Ring Resonators and Microstrip Lines
|
Chen, Chia-Mao; Chang, Shoou-Jinn; Yang, Cheng-Fu |
| 大葉大學 |
2008-01 |
Fabrication of a novel piezoelectric actuator with high load-bearing capability
|
Cheng, C. H.;Tu, S. L. |
| 臺大學術典藏 |
2003 |
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
|
Hsieh, Hsyue-Jen; Lin, Mei-Chiao; Wang, Da-Ming; Wang, Yu-Chi; Wang, Yu-Chi; Lin, Mei-Chiao; Wang, Da-Ming; Hsieh, Hsyue-Jen |
| 國立臺灣大學 |
2003 |
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
|
Wang, Yu-Chi; Lin, Mei-Chiao; Wang, Da-Ming; Hsieh, Hsyue-Jen |
| 南台科技大學 |
2015-07-20 |
Fabrication of a Peristaltic Micropump with UV Curable Adhesive
|
Yi-chu Hsu;Jeffrey Levin |
| 國立臺灣大學 |
2002 |
Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete
|
TONG, J.-H.; WU, T.-T.; LEE, C.-K. |
| 國立臺灣大學 |
2002 |
Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete
|
Tong, J.-H.; Wu, T.-T.; Lee, C.-K. |
| 臺大學術典藏 |
2020-04-28T07:12:33Z |
Fabrication of a piezoelectric impact hammer and its application to the in-situ nondestructive evaluation of concrete
|
Tong, J.-H.; Wu, T.-T.; Lee, C.-K.; CHIH-KUNG LEE |
| 國立成功大學 |
2006-06-15 |
Fabrication of a planar-form screen-printed solid electrolyte modified Ag/AgCl reference electrode for application in a potentiometric biosensor
|
Liao, Wei-Yin; Chou, Tse-Chuan |
| 元智大學 |
2017-05-12 |
Fabrication of a poly(3-hydroxybutyrate) based membranes by electrospinning for rotator cuff tendon tear tissue engineering
|
賴冠安; Sun Y.-M. |
| 國立交通大學 |
2014-12-08T15:12:34Z |
Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method
|
Chung, Junwei; Hsu, Wensyang |
| 臺大學術典藏 |
2018-09-10T08:36:44Z |
Fabrication of a polymer/mediator composite modified electrode and its application to electrochemical detection of iodate
|
Li, T.-J.; Lin, C.-Y.; Balamurugan, A.; Kung, C.-W.; Wang, J.-Y.; Hu, C.-W.; Wang, C.-C.; Chen, P.-Y.; Vittal, R.; Ho, K.-C.; KUO-CHUAN HO |
| 國立高雄應用科技大學 |
2012-03 |
Fabrication of a prism structure on light guide plates with UV roll-to-plate imprinting process
|
YANG, JEN-CHIH; HUANG, CHUNG-CHING |
| 臺大學術典藏 |
2019-11-04T06:42:23Z |
Fabrication of a PVC-based solid-state Ag/AgCl reference electrode
|
Wu, Yi Min;LIN-CHI CHEN; Wu, Yi Min; LIN-CHI CHEN; Wu, Yi Min; LIN-CHI CHEN; LIN-CHI CHEN |
| 國立臺灣科技大學 |
2019 |
Fabrication of a pyramidal micro-needle array structure using 3D micro-lens mask lithography
|
Lin, T.-H.;Jiang, Jiang J.-M. |
| 亞洲大學 |
2017-01 |
Fabrication of a reticular poly；lactide-co-glycolide cylindrical scaffold for the in vitro development of microvascular networkds
|
Wang, Yen-Ting Tun；Yen-Ting Tung；Cheng-Chung；Cheng-Chung Chang；朱志成；Jyh-Cherng Ju；Gou-Jen Wang；Gou-Jen |
| 中國文化大學 |
2014-03 |
Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization
|
Su, Pi-Guey; Peng, Yu-Ting |
| 中國文化大學 |
2011-02-15 |
Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method
|
Su, PG (Su, Pi-Guey); Pan, TT (Pan, Te-Tsun) |
| 元智大學 |
2016-09-03 |
Fabrication of a sandwich construct scaffold by silk fibroin/bacterial cellulose-blended sponge and electrospun membrane for potential rotator cuff tendon tear (RCTT) tissue engineering
|
Guan-An Lai; Ya-Wen Liu; Chin-Hung Lan; Yi-Ting Ma; Wei-Quan Chen; Sun Y.-M. |
| 元智大學 |
2017-05-14 |
Fabrication of a scaffold by electrospun poly(3-hydroxybutyrate) based membranes for rotator cuff tendon tear tissue engineering
|
Guan-An Lai; Ya-Wen Liu; Chin-Hung Lan; Wei-Quan Che; Sun Y.-M. |
| 國立暨南國際大學 |
2008 |
Fabrication of a Screen-Printing Reference Electrode for Potentiometric Measurement?
|
孫台平; Sun, TP |
| 國立成功大學 |
2014-04 |
Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography
|
Tsai, Sung-Wen; Chen, Po-Yu; Lee, Yung-Chun |
| 臺大學術典藏 |
2021-12-21T23:17:19Z |
Fabrication of a selective sensor amplification probe modified with multi-component zn2sno4/sno2 heterostructured microparticles as a robust electrocatalyst for electrochemical detection of antibacterial drug secnidazole
|
Sukanya, Ramaraj; Balamurugan, Karuppaiah; Chen, Shen Ming; Rajakumaran, Ramachandran; Muthupandi, K.; Shim, Jae Jin; Breslin, Carmel B. |
| 國立交通大學 |
2014-12-08T15:47:13Z |
Fabrication of a sensitive germanium microbolometer for tympanic thermometry
|
Chen, CN; Shie, JS |
| 國立交通大學 |
2019-04-02T05:58:47Z |
Fabrication of a sensitive germanium microbolometer for tympanic thermometry
|
Chen, CN; Shie, JS |
| 淡江大學 |
2017-09-04 |
Fabrication of a single Ga-doped ZnS nanowires as high-gain photosensors by focused ion beam deposition
|
Yen SH, Hung YC, Su Y, Yeh PH, Wang CY. |
| 中國醫藥大學 |
2001-10-25 |
Fabrication of a specially designed bioreactor for the bioengineering of tendons and ligaments
|
曾國峰; 許弘昌(Horng-Chaung Hsu) |
| 國家衛生研究院 |
2010-11 |
Fabrication of a SU-8-based polymer-enclosed channel with a penetrating UV/ozone-modified interior surface for electrokinetic separation of proteins
|
Chang, CJ;Yang, CS;Lan, LH;Wang, PC;Tseng, FG |
| 中原大學 |
2007-08 |
Fabrication of a Super-Hydrophobic PVDF Membrane via Nonsolvent Induced PhaseSeparation
|
Kuo, Chun-Yin;Tsai, Hui-An;Wang, Da-Ming;Lai, Juin-Yih |
| 國立臺灣科技大學 |
2018 |
Fabrication of a thermally conductive silicone composite by incorporating surface-modified boron nitride
|
Kuo, C.-F.J.;Dewangga, G.R.S.;Chen, J.-B. |
| 淡江大學 |
2015-05-18 |
Fabrication of a totally renewable off-channel amperometric platform for microchip electrophoresis
|
Chi-Hao Chen; Ya-Ting Lin; Meng-Shan Lin |
| 國立交通大學 |
2018-08-21T05:56:45Z |
FABRICATION OF A TRANSPARENT STRUCTURED SUPEROMNIPHOBIC SURFACE USING A MULTIPLE PARTIAL EXPOSE METHOD
|
Lee, Meng-Shiue; Wu, Po-Han; Hsu, Wensyang |
| 臺大學術典藏 |
2018-09-10T08:10:00Z |
Fabrication of a ZnO film with a mosaic structure for a high efficient dye-sensitized solar cell
|
KUO-CHUAN HO;Ho, K.-C.;Vittal, R.;Kung, C.-W.;Chen, J.-G.;Chen, H.-W.;Lin, C.-Y.;Lai, Y.-H.; Lai, Y.-H.; Lin, C.-Y.; Chen, H.-W.; Chen, J.-G.; Kung, C.-W.; Vittal, R.; Ho, K.-C.; KUO-CHUAN HO |
