| 國立臺灣科技大學 |
2000 |
Optimization of the Electrical Discharge Machining Process Based on the Taguchi Method with Fuzzy Logics
|
Lin, J.L.;Wang, K.S.;Yan, B.W.;Tarng, Y.S. |
| 國立臺灣科技大學 |
2004 |
Optimization of the Electrical Discharge Machining Process Using the GA-based Neural Network
|
Su, J.C.;Kao, J.Y.;Tarng, Y.S. |
| 國立臺灣科技大學 |
2006 |
Optimization of the electron-beam-lithography parameters for the moth-eye effects of an antireflection matrix structure
|
Kuo, C.-F.J.;Tu, H.-M.;Su, T.-L. |
| 國立臺灣大學 |
2002-12 |
Optimization of the enzymic process for manufacturing low-lactose milk containing oligosaccharides
|
Chen, C.-S.; Hsu, C.-K.; Chiang, B.-H. |
| 輔英科技大學 |
1999-07-15 |
Optimization of the Experimental Conditions for the Preparation of a Thin Barium Titanate Film by Hydrothermal Process
|
謝慶燮 |
| 國立成功大學 |
2011-10 |
Optimization of the exponential stabilization problem in active suspension system using PSO
|
Tung, Shen-Lung; Juang, Yau-Tarng; Lee, Wei-Hsun; Shieh, Wern-Yarng; Wu, Wei-Ying |
| 國立臺灣大學 |
1988 |
Optimization of the Expression of a Foreign Gene from Galactose- Inducible Promoter in a Recombinant Yeast
|
Lin, Kong-Hua; 黃世佑; Iijima, Shinji; Hishinuma, Fumio; Kobayashi, Takeshi; Lin, Kong-Hua; Huang, Shih-Yow; Iijima, Shinji; Hishinuma, Fumio; Kobayashi, Takeshi |
| 國立臺灣科技大學 |
2009 |
Optimization of the extrusion process for magnesium alloy sheets using the fuzzy-based Taguchi method
|
Hsiang S.-H.; Lin Y.-W. |
| 國立暨南國際大學 |
2009 |
Optimization of the Fabrication Process for ZnO Thin-Film Transistors with HfO2 Gate Dielectrics
|
陳建亨?; Chen, HJH |
| 國立暨南國際大學 |
2009 |
Optimization of the Fabrication Process for ZnO Thin-Film Transistors with HfO2 Gate Dielectrics
|
葉柏良?; Yeh, BBL |
| 國立臺灣科技大學 |
2006 |
Optimization of the film coating process for polymer blends by the grey-based Taguchi method
|
Kuo, C.-F.J.;Wu, Y.-S. |
| 國立交通大學 |
2014-12-08T15:17:04Z |
Optimization of the growth of the InGaP etch-stop layer by MOVPE for InGaP/GaAs HBT device application
|
Hsieh, YC; Chang, EY; Yeh, SS; Chang, CW; Luo, GL; Chang, CY; Lee, CT |
| 國立臺灣大學 |
2003 |
Optimization of the Growth Rate of Probiotics in Fermented Milk Using Genetic Algorithms and Sequential Quadratic Programming Techniques
|
Chen, MJ; Chen; KN; Lin, CW |
| 臺大學術典藏 |
2018-09-10T04:27:25Z |
Optimization of the growth rate of probiotics in fermented milk using genetic algorithms and sequential quadratic programming techniques
|
Chen, M.-J.;Chen, K.-N.;Lin, C.-W.; Chen, M.-J.; Chen, K.-N.; Lin, C.-W.; MING-JU CHEN |
| 元智大學 |
2022-12 |
Optimization of the growth temperature and periods for improving the optical properties of SWIR Type-II super lattice for Infrared Photodetectors
|
Yung-Jyun Liao; Wei-Sheng Liu; Hou-Yi Chen; Pin-Chih Liu; Balaji. G; Kai-Yang Hsu; Jen-Inn Chyi |
| 元智大學 |
2022-12-02 |
Optimization of the growth temperature and periods for improving the optical properties of SWIR Type-II super lattice for Infrared Photodetectors
|
Yung-Jyun Liao; Hou-Yi Chen; Pin-Chih Liu; Balaji G; Kai-Yang Hsu; Wei-Sheng Liu; Jen-Inn Chyi |
| 國立交通大學 |
2014-12-08T15:07:48Z |
Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach
|
Lin, Hsuan-Liang; Chou, Chang-Pin |
| 國立交通大學 |
2014-12-08T15:41:44Z |
Optimization of the headspace solid-phase microextraction for determination of glycol ethers by orthogonal array designs
|
Huang, CT; Su, YY; Hsieh, YZ |
| 國立臺灣大學 |
1991-06 |
Optimization of the Heat Exchanger for the Roto-Cooler Air Conditioning Systems
|
黃元茂; Huang, Yuan-Mao |
| 國立高雄第一科技大學 |
2005.12 |
Optimization of the High-Speed CNC Milling Process Using Two-Phase Parameter Design Strategy by the Taguchi Methods
|
Tzeng, Yih-Fong;Chen, Fu-Chen; 曾義豐 |
| 國立成功大學 |
2008-07-15 |
Optimization of the highly strained InGaAs/GaAs quantum well lasers grown by MOVPE
|
Su, Yan-Kuin; Chen, W. C.; Wan, C. T.; Yu, H. C.; Chuang, R. W.; Tsai, M. C.; Cheng, K. Y.; Hu, C.; Tsau, Seth |
| 國立臺灣科技大學 |
2012 |
Optimization of the hybrid asymmetric-FIR/analog square-root filters
|
Yao, C.-Y.;Ho, Y.-H.;Hsia, W.-C. |
| 南亞技術學院 |
2011-07 |
OPTIMIZATION OF THE INJECTION MOLDING PROCESS FOR SHORT-FIBER-REINFORCED COMPOSITES
|
Chen, Ch. -Sh.;Chen, T. -J.;Chen, Sh. -Ch.;Chien, R. -D. |
| 國立成功大學 |
2017 |
Optimization of the LCD optical film cutting problem
|
Huang;Yeu-Shiang;Wang;Shiang-An;Fang;Chih-Chiang |
| 國立交通大學 |
2014-12-08T15:06:46Z |
Optimization of the lens holder and yoke for a near-field optical pickup actuator to enhance frequency response
|
Peng, Ming-Tsan; Huang, Hai-Jo; Wu, Chun-Te; Lee, Kwen-Jin; Yang, Lei-Ming; Chang, Chi-Shen; Ke, Chau-Yuan; Wang, Shyh-Jier; Jeng, Tzuan-Ren; Ju, Jau-Jiu |
