| 國立中山大學 |
2004-07-04 |
Optimization of Injection Technique for Microfluidic Chips
|
Che-Hsin Lin;Chien-Hsiung Tsai;Lung-Ming Fu |
| 國立臺灣科技大學 |
2013 |
Optimization of injection-molded light guide plate with microstructures by using reciprocal comparisons
|
Kuo, C.-F.J.;Dewantoro, G.;Huang, C.-C. |
| 國立臺灣科技大學 |
2015 |
Optimization of injection-molded light guide plate with microstructures by using reciprocal comparisons
|
Kuo, C.-F.J.;Dewantoro, G.;Huang, C.-C. |
| 中原大學 |
2009 |
Optimization of Interpoly Dielectric Using Plasma Nitridation and Wet Treatment for Future NAND Flash
|
Ching Yuan Ho; Jr Hau He |
| 國立中山大學 |
2005-8 |
Optimization of inverter placement for mass rapid transit systems using genetic algorithm
|
Hui-Jen Chuang;Chao-Shun Chen;Chia-Hung Lin;Shi-Hong Chu |
| 臺大學術典藏 |
2020-02-25T06:10:46Z |
Optimization of isopropyl alcohol degradation by microwave-induced catalytic oxidation process
|
Tran, Quynh Thi Phuong; Hsieh, Chi-Hsu; Yang, Tung-Yu; Tung, Hsin-hsin; HSIN-HSIN TUNG |
| 中國文化大學 |
2008 |
Optimization of Job Schedule Model Based on Grid Environment
|
吳宏文等撰 |
| 臺大學術典藏 |
2006-05 |
Optimization of key parameters in the PEM fuel cell
|
Lin, H. H.; Cheng, C. H.; Soong, C. Y.; Falin Chen; Yan, W. M.; Lin, H. H.; Cheng, C. H.; Soong, C. Y.; Falin Chen; Yan, W. M. |
| 國立臺灣大學 |
2006-05 |
Optimization of key parameters in the PEM fuel cell
|
Lin, H. H.; Cheng, C. H.; Soong, C. Y.; Falin Chen; Yan, W. M. |
| 國立臺灣大學 |
2006 |
Optimization of key parameters in the proton exchange membrane fuel cell
|
Lin, Hung-Hsiang; Cheng, Chin-Hsiang; Soong, Chyi-Yeou; Chen, Falin; Yan, Wei-Mon |
| 國立高雄師範大學 |
2003 |
Optimization of Lactic Acid Production by Lactobacillus amylovorus: Effect of Nitrogen Source
|
謝建元; Chien-Yan Hsieh |
| 國立暨南國際大學 |
2001 |
Optimization of Land Use and Water Resources Planning in areas of Land Subsidence Using Problem-Orie
|
葉欣誠 |
| 臺大學術典藏 |
2020-02-25T06:12:32Z |
Optimization of landfill leachate treatment by microwave oxidation using the Taguchi method
|
Yeh, C.-J.; Lo, S.-L.; Kuo, J.; Chou, Y.-C.; SHANG-LIEN LO |
| 國立成功大學 |
2023-05~2023-06 |
Optimization of lap-joint laser welding parameters using high-fidelity simulations and machine learning mode
|
Tsai;Yung-An;Lo;Yu-Lung;Raza;Mohsin, M.;Saleh;Ali, N.;Chuang;Tzu-Ching;Chen;Cheng-Yen;Chiu;Chi-Pin |
| 國立臺灣海洋大學 |
2016-06 |
Optimization of large-scale economic dispatch with valve-point effects using a modified hybrid PSO-DSM approach
|
Chun-Lung Chen; Y. L. Lin; Y. C. Feng |
| 國立臺灣大學 |
2012 |
Optimization of Laser Processing in the Fabrication of Stents
|
Chen, Cheng-Shun; Lin, Sheng-Yao; Chou, Nai-Kuan; Chen, Yih-Sharng; Ma, Sheau-Fan; 陳益祥; 周迺寬 |
| 臺大學術典藏 |
2018-09-10T09:26:47Z |
Optimization of laser processing in the fabrication of stents
|
Chen, C.-S. and Lin, S.-Y. and Chou, N.-K. and Chen, Y.-S. and Ma, S.-F.; Nai-Kuan Chou |
| 臺大學術典藏 |
2020-03-09T07:30:41Z |
Optimization of laser processing in the fabrication of stents
|
Chen C.-S.; Lin S.-Y.; NAI-KUAN CHOU; Chen Y.-S.; Ma S.-F. |
| 國立交通大學 |
2020-07-01T05:21:48Z |
Optimization of laser release process for throughput enhancement of fan-out wafer-level packaging
|
Lee, Chia-Hsin; Su, Jay; Liu, Xiao; Wu, Qi; Lin, Jim-Wein; Lin, Puru; Ko, Cheng-Ta; Chen, Yu-Hua; Shen, Wen-Wei; Kou, Tzu-Ying; Huang, Shin-Yi; Lin, Ang-Ying; Lin, Yu-Min; Chen, Kuan-Neng |
| 國立成功大學 |
2018 |
Optimization of laser-driven cylindrical implosions on the OMEGA laser
|
Hansen, E.C.;Barnak, D.H.;Chang, P.-Y.;Betti, R.;Campbell, E.M.;Davies, J.R.;Knauer, J.P.;Peebles, J.L.;Regan, S.P.;Sefkow, A.B. |
| 國立成功大學 |
2018-12-01 |
Optimization of laser-driven cylindrical implosions on the OMEGA laser
|
張博宇; Chang, Po-Yu; Hansen, E.C.;Barnak, D.H.;Betti, R.;Campbell, E.M.;Davies, J.R.;Knauer, J.P.;Peebles, J.L.;Regan, S.P.;Sefkow, A.B. |
| 國立成功大學 |
2024-05 |
Optimization of laser-driven quantum beam generation and the applications with artificial intelligence
|
Kuramitsu;Y;Taguchi;T;Nikaido;F;Minami;T;Hihara;T;Suzuki;S;Oda;K;Kuramoto;K;Yasui;T;Abe;Y;Ibano;K;Takabe;H;Chu;C, M.;Wu;K, T.;Woon;W, Y.;Chen;S, H.;Jao;C, S.;Chen;Y, C.;Liu;Y, L.;Morace;A;Yogo;A;Arikawa;Y;Kohri;H;Tokiyasu;A;Kodaira;S;Kusumoto;T;Kanasaki;M;Asai;T;Fukuda;Y;Kondo;K;Kiriyama;H;Hayakawa;T;Tanaka;S, J.;Isayama;S;Watamura;N;Suzuki;H;Kumar;H, S.;Ohnishi;N;Pikuz;T;Filippov;E;Sakai;K;Yasuhara;R;Nakata;M;Ishikawa;R;Hoshi;T;Mizuta;A;Bolouki;N;Saura;N;Benkadda;S;Koenig;M;Hamaguchi;S |
| 國立臺灣科技大學 |
2018 |
Optimization of life-cycle cost of retrofitting school buildings under seismic risk using evolutionary support vector machine
|
Cheng M.-Y.; Wei H.-H.; Wu Y.-W.; Chen H.-M.; Wu C.-W. |
| 國家衛生研究院 |
2013-06-28 |
Optimization of ligand and lipophilic efficiency to identify an in vivo active furano-pyrimidine aurora kinase inhibitor
|
Shiao, HY;Coumar, MS;Chang, CW;Ke, YY;Chi, YH;Chu, CY;Sun, HY;Chen, CH;Lin, WH;Fung, KS;Kuo, PC;Huang, CT;Chang, KY;Lu, CT;Hsu, JT;Chen, CT;Jiaang, WT;Chao, YS;Hsieh, HP |
| 國立交通大學 |
2014-12-08T15:34:14Z |
Optimization of light diffraction efficiency and its enhancement from a doped-PMMA volume holographic material
|
Hsieh, Mei-Li; Chen, Wei-Cheng; Chen, Hong-Yu; Lin, Shawn-Yu |
| 國立高雄第一科技大學 |
2008.08 |
Optimization of Light Guide Plate with Microstructures for Extra Light Modern Backlight Module
|
Li, Chen-Jung;Fang, Yi-Chin;Chu, Wei-Tang;Cheng, Ming-Chia |
| 國立高雄第一科技大學 |
2008.08 |
Optimization of Light Guide Plate with Microstructures for Extra Light Modern Backlight Module
|
Li, Chen-Jung;Fang, Yi-Chin;Chu, Wei-Tang;Cheng, Ming-Chia; 李振榮 |
| 國立臺灣大學 |
2002 |
Optimization of lily microbulb multiplication operation
|
Hsieh, Ching-Lu; Lin, Ta-Te |
| 國立臺灣大學 |
2000 |
Optimization of lily microbulb scale separation operation
|
Lin, Ta-Te; Hsieh, C.-L.; Su, P.-Y.; Chen, W.-H. |
| 國立東華大學 |
2009 |
Optimization of limited network capacity with toll settings
|
Chiou, S-W. |
| 大葉大學 |
2003 |
Optimization of lipase-catalyzed biodiesel by response surface methodology
|
Liao, H.-F.;Lee, C.-C. |
| 大葉大學 |
2002-12 |
Optimization of lipase-catalyzed biodiesel by response surface methodology
|
李晉嘉 |
| 大葉大學 |
2005-02 |
Optimization of lipase-catalyzed synthesis of octyl hydroxyphenylpropionate by response surface methodology
|
Twu, Y.-K.;Shih, I.-L.;Yen, Y.-H.;Ling, I.-F. |
| 大葉大學 |
2005-01 |
Optimization of Lipase-Catalyzed Synthesis of Octyl Hydroxyphenylpropionate by Response Surface Methodology.
|
Twu, Yawo-Kuo;Shih, Ing-Lung;Yen, Yun-Horng;Lin, Yi-Fan;Shieh, Chwen-Jen |
| 大葉大學 |
2005-01 |
Optimization of Lipase-Catalyzed Synthesis of Octyl Hydroxyphenylpropionate by Response Surface Methodology.
|
Shih, I. L.;Yen, Y. H.;Ling, Y. F.;Shieh, C. J.;Twu, Yawo-Kuo |
| 大葉大學 |
2005-02 |
Optimization of lipase-catalyzed synthesis of octyl hydroxyphenypropionate by response surface methodology.
|
Twu, Y. K.;Yen, Y. H.;Ling, Y. F.;Shieh, C. J.;Shih, Ing-Lung |
| 臺大學術典藏 |
2018-09-10T15:20:34Z |
Optimization of liquid fermentation medium for production of inonotus Sanghuang (Higher basidiomycetes) mycelia and evaluation of their mycochemical contents and antioxidant activities
|
Tian, X.-M.; Dai, Y.-C.; Song, A.-R.; Xu, K.; Ng, L.-T.; LEAN-TEIK HUANG |
| 東海大學 |
2008 |
Optimization of logical rings for multi-hop transmissions in WDM optical star networks
|
Liu, J.a , Ho, H.-J.b , Lee, S.a |
| 國立成功大學 |
2015-12-05 |
Optimization of louvered-fin heat exchanger with variable louver angles
|
Jang, Jiin-Yuh; Chen, Chun-Chung |
| 淡江大學 |
2014-07-11 |
Optimization of Low Wattage Thermosyphon by Taguchi Method and Numerical Simulation
|
Che-yin Lee **1, Hsin-heng Huang 2, Shih-ming Lee 2 and Kwan Ouyang |
| 國立彰化師範大學 |
2009 |
Optimization of Low-growth-rate GaN Buffer Layer for GaN Film Grown on Si(111) by Molecular Beam Epitaxy
|
Fan, J. C. ; Kaun, C. C. ; Lo, Y. Y. ; Wu, C. J. ; Liang, Y. C. ; Lin, C. Y. ; Huang, Man-Fang |
| 南台科技大學 |
2007 |
Optimization of luminance of carbon nano-tubes field emission display
|
高至誠; Yu-cheng Liu; Chih-cheng Kao |
| 國立成功大學 |
2018-08 |
Optimization of lutein production with a two-stage mixotrophic cultivation system with Chlorella sorokiniana MB-1
|
Chen;Chun-Yen;Liu;Chen-Chun |
| 朝陽科技大學 |
2024-04 |
Optimization of lysozyme-modified ion exchange nanofiber membrane for efficient capture of Escherichia coli: Antibacterial and cytotoxic studies
|
Gnoumou, Edouard;Tran, Thi Tam An;Srinophakun, Penjit;Liu, Bing-Lan;Chiu, Chen-Yaw;Lee, Hung-Che;Wang, Chi-Yun;Chen, Kuei-Hsiang;Chang, Yu-Kaung |
| 朝陽科技大學 |
2014-09 |
Optimization of Machine Repair System with Controlling Arrival and Switching Failure
|
張阜民 |
| 國立交通大學 |
2014-12-08T15:48:50Z |
Optimization of machining conditions for turning cylindrical stocks into continuous finished profiles
|
Chen, MC; Su, CT |
| 修平科技大學 |
2007-09 |
Optimization of machining parameters for a light guide plate printing process using Grey relational analysis
|
Te-Chang Tsai; Ko-Ta Chaing; Fu-Ping Chang; Chih-Chung Chou |
| 修平科技大學 |
2007-09 |
Optimization of machining parameters for a light guide plate printing process using Grey relational analysis
|
Te-Chang Tsai; Ko-Ta Chaing; Fu-Ping Chang; Chih-Chung Chou |
| 朝陽科技大學 |
2014-06 |
Optimization of Machining Parameters in ECM of Al/B4C Composites Using Taguchi Method
|
and, S.R.Rao;G.Padmanabhan |
| 國立臺灣大學 |
2003 |
Optimization of Machining Parameters of Wire-EDM Based on Grey Relational and Statistical Analyses
|
Huang, J.T.; Liao, Y.S. |
