| 中華大學 |
2010 |
Tribological Behaviour of MoS2/Au Coatings
|
馬廣仁; Ma, Kung-Jen |
| 淡江大學 |
2010-10 |
Tribological behaviour of MoS2/Au coatings
|
Chien, Hsi-hsin; Ma, Kung-jeng; Vattikuti, SV P.; Kuo, Chien-huang; Huo, Cheng-bang; Chao, Choung-lii |
| 國立成功大學 |
2004-11-10 |
Tribological characteristics and cutting performance of Crx%C-coated carbide tools
|
Su, Yean-Liang; Liu, Tzuan-Horng; Su, Chih-Tsong; Yur, Jiahn-Piring; Kao, Wen-Hsien; Yao, Shun-Hui |
| 國立高雄第一科技大學 |
2004.11 |
Tribological characteristics and cutting performance of Crx%C-coated carbide tools
|
Y.L.Su;T.H.Liu;C.T.Su;J.P.Yur;W.H.Kao;S.H.Yao; 蘇啟宗 |
| 國立成功大學 |
2004-10-25 |
Tribological characteristics of Si3N4-based composites in unlubricated sliding against steel ball
|
Liu, Chien-Cheng; Huang, Jow-Lay |
| 國立成功大學 |
2001-01-02 |
Tribological characteristics of titanium nitride and titanium carbonitride multilayer films Part I. The effect of coating sequence on material and mechanical properties
|
Wei, Chehung; Lin, Jen-Fin; Jiang, Tsae-Hwa; Ai, Chi-Fong |
| 國立成功大學 |
2001-01-02 |
Tribological characteristics of titanium nitride and titanium carbonitride multilayer films Part II. The effect of coating sequence on tribological properties
|
Wei, Chehung; Lin, Jen-Fin; Jiang, Tsae-Hwa; Ai, Chi-Fong |
| 國立臺灣科技大學 |
2020 |
Tribological effects of carbon nanotubes on magnesium alloy AZ31 and analyzing aging effects on CNTs/AZ31 composites fabricated by stir casting process
|
Abbas, Abbas A.;Huang, S.J.;Ballóková, Ballóková B.;Sülleiová, K. |
| 國立臺灣海洋大學 |
1997 |
Tribological Effects of Roughness and Running-In on Oil-Lubricated Line-Contacts
|
Chou, C. C.；Lin, J. F. |
| 臺大學術典藏 |
2018-09-10T14:55:07Z |
Tribological impact of touchdown detection on bit patterned media robustness
|
JIA-YANG JUANG;Lin, K.-T.;Wu, W.;Juang, J.-Y.;JIA-YANG JUANG; Juang, J.-Y.; Wu, W.; Lin, K.-T.; JIA-YANG JUANG |
| 臺大學術典藏 |
2020-01-13T08:20:41Z |
Tribological impact of touchdown detection on bit patterned media robustness
|
Juang, J.-Y.; Wu, W.; Lin, K.-T.; JIA-YANG JUANG |
| 國立臺灣大學 |
2009-04 |
Tribological interaction between multi-walled carbon nanotubes and silica surface using lateral force microscopy
|
Hsu, J.H.; Chang, S.H. |
| 國立臺灣科技大學 |
2017 |
Tribological performance evaluation of biodiesel distilled residue blended with fossil diesel
|
Lin, Y.-C.;Chen, H.-S.;Hsu, C.-C.;Ku, Y.-Y.;Lin, K.-W. |
| 國立臺灣科技大學 |
2017 |
Tribological performance evaluation of hydrotreated vegetable oil blended with fossil diesel
|
Lin, Y.-C.;Hsu, C.-C. |
| 國立成功大學 |
1998-04 |
Tribological performance of 6061 aluminum alloy graphite materials under oil-lubricated and dry sliding conditions
|
Lin, Jen Fin; Yung, Ying Chong; Tsao, Chi Yuan |
| 國立臺灣科技大學 |
2013 |
Tribological performance of engine oil blended with various diesel fuels
|
Lin, Y.-C.;Kan, T.-H.;Chen, J.-N.;Tsai, J.-C.;Ku, Y.-Y.;Lin, K.-W. |
| 國立臺灣科技大學 |
2012 |
Tribological Performance of EP Additives in Different Base Oils
|
Lin, Y.-C.;Cho, Y.-H.;Chiu, C.-T. |
| 國立臺灣大學 |
2012 |
Tribological Performance of EP Additives in Different Base Oils
|
Lin, Yuan-Ching; Cho, Yu-Hsien; Chu, Chin-Te |
| 國立成功大學 |
2018 |
Tribological performance, electrochemical behavior and biocompatibility of high-temperature gas-nitrided Ti6Al4V alloy
|
Kao, W.-H.;Su, Y.-L.;Horng, J.-H.;Yang, S.-E. |
| 國立成功大學 |
2021 |
Tribological properties and corrosion resistance properties of nbn/tin multilayer, tinb-nx single-layer and coatings that are doped with carbon
|
Kuo, Kuo K.-L.;Su, Y.-L.;Kao, W.-H.;Mao, Y.-H.;Liang, T.-W. |
| 中華大學 |
2003 |
Tribological properties of a-C/a-C:Cr multilayer coatings
|
馬廣仁; Ma, Kung-Jen |
| 淡江大學 |
2003-10 |
Tribological properties of a-C/a-C:Cr multilayer coatings
|
趙崇禮 |
| 國立成功大學 |
2018 |
Tribological properties of biomedical 316L stainless steel after plasma nitriding and Ti-C:H sputtering coating
|
Kao, W.-H.;Su, Y.-L. |
| 國立臺灣科技大學 |
2015 |
Tribological properties of commercially pure copper with different microstructures, in contact with a graphitic material
|
Semenov, V.I.;Huang, S.-J.;Shibakov, V.G.;Shuster, L.S.;Faizova, S.N.;Lin, P.-C. |
| 國立臺灣海洋大學 |
2009 |
Tribological Properties of Cr-Si-N Nanocomposite Film Adherent Silicon under Various Environments
|
Hsin-Han Lin;Chau-Chang Chou;Jyh-Wei Lee |
| 國立臺灣海洋大學 |
2010-10 |
Tribological properties of Cr–Si–N nanocomposite film adherent silicon under various environments
|
Hsin-Han Lin;Chau-Chang Chou;Jyh-Wei Lee |
| 中原大學 |
2009 |
Tribological properties of diamond and SiO2 nanoparticles added in paraffin
|
Peng, D. X.; Kang, Y.; Hwang, R. M.; Shyr, S. S.; Chang, Y. P. |
| 建國科技大學 |
2011 |
Tribological properties of DLC coating with changed hot filament current
|
高文顯 |
| 建國科技大學 |
2011 |
Tribological properties of DLC coating with changed Zr target current
|
高文顯 |
| 建國科技大學 |
2011 |
Tribological properties of DLC films with changed hot filament current
|
高文顯 |
| 國立虎尾科技大學 |
2007 |
Tribological properties of electroless Ni-P-SiC composite coatings in rolling/sliding contact under boundary lubrication
|
Liu, Wei-Long;Hsieh, Shu-Hue;Hwang, Shen-Jenn;Tsai, Ting-Kan;Chen, Wen-Jauh |
| 淡江大學 |
2013-01 |
Tribological properties of N+ ion implanted ultrananocrystalline diamond films
|
Panda, Kalpataru; Kumar, N.; Panigrahi, B. K.; Polaki, S. R.; Sundaravel, B.; Dash, S.; Tyagi, A. K.; Lin, I-Nan |
| 淡江大學 |
2013-01 |
Tribological properties of N+ ion implanted ultrananocrystalline diamond films
|
Kalpataru Panda; N. Kumar; B.K. Panigrahi; S.R. Polaki; B. Sundaravel; S. Dash; A.K. Tyagi; Lin, I-Nan |
| 國立成功大學 |
2020-12 |
Tribological Properties of Oil-in-Water Emulsion with Carbon Nanocapsule Additives
|
Jeng;Yeau-Ren;Tsai;Ping-Chi;Chang;Ching-Min;Hsu;Kuo-Feng |
| 國立成功大學 |
2023 |
Tribological Properties of Polyvinyl Alcohol/Uncaria Gambir Extract Composite as Potential Green Protective Film
|
Rahmadiawan, D.;Abral, H.;Shi, Shi S.-C.;Huang, T.-T.;Zainul, R.;Ambiyar;Nurdin, H. |
| 國立成功大學 |
2005-02-18 |
Tribological properties of Ti2N-W-x% coatings deposited by magnetron sputtering
|
Su, Yean-Liang; Liu, Tzuan-Horng |
| 淡江大學 |
2012-08 |
Tribological properties of ultrananocrystalline diamond and diamond nanorod films
|
Panda, Kalpataru; Kumar, N.; Sankaran, K.J.; Panigrahi, B.K.; Dash, S.; Chen, H.-C.; Lin, I-nan; Tai, N.-H.; Tyagi, A.K. |
| 建國科技大學 |
2010 |
Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen additio
|
高文顯 |
| 建國科技大學 |
2011 |
Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen addition
|
黃錫泉 |
| 建國科技大學 |
2010 |
Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen addition
|
高文顯 |
| 國立成功大學 |
2011-11-01 |
Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen addition
|
Kao, W. H.; Su, Y. L.; Yao, S. H.; Huang, H. C. |
| 建國科技大學 |
2010 |
Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen addition nitrogen addition
|
高文顯 |
| 國立成功大學 |
2006-03-10 |
Tribological property and drilling application of Ti-C : H and Cr-C : H coatings on high-speed steel substrates
|
Kao, Wen-Hsien; Su, Yean-Liang; Yao, Shun-Hui |
| 國立高雄應用科技大學 |
1999-12 |
Tribological Property and Microstructure of the TiN-Coated Fe-Al-Mn-C Alloys
|
Lin, Yin-Chih |
| 南開科技大學 |
2009-05-19 |
Tribological Simulation of Artificial Joints Using Polyethylene Sliding Against Metal Surface
|
You, Hsien-I;Liu, Meng-Yueh |
| 中國文化大學 |
2008 |
Tribological studies of electroless nickel/diamond composite coatings on steels
|
Hung, C. C.; Lin, C. C.; Shih, Han C. |
| 國立臺灣科技大學 |
2013 |
Tribological surface modification for thrust bearing in scroll compressor
|
Lin, Y.-C.;Chen, H.-H.;Tang, Y.-J.;Chen, J.-N.;Wang, B.-C. |
| 國立成功大學 |
2022 |
Tribological, Anti-corrosion, and Electrical Conductivity Properties of CrCx Coatings Deposited on Stainless Steel 316L and Used as Metal Bipolar Plates for Fuel Cells
|
Su, Y.L.;Kao, W.H.;Chang, G.Y. |
| 國立成功大學 |
2023 |
Tribological, Anti-corrosion, and Electrical Conductivity Properties of CrCx Coatings Deposited on Stainless Steel 316L and Used as Metal Bipolar Plates for Fuel Cells
|
Su, Y.L.;Kao, W.H.;Chang, G.Y. |
| 國立成功大學 |
2018 |
Tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy produced by selective laser melting method and then processed using gas nitriding, CN or Ti-C:H coating treatments
|
Kao, W.H.;Su, Y.L.;Horng, J.H.;Chang, Chang C.Y. |
