| 國立交通大學 |
2015-12-02T02:59:39Z |
Biomechanical analysis of acromioclavicular joint dislocation treated with clavicle hook plates in different lengths
|
Shih, Cheng-Min; Huang, Kui-Chou; Pan, Chien-Chou; Lee, Cheng-Hung; Su, Kuo-Chih |
| 國立臺灣大學 |
1994 |
Biomechanical Analysis of Anterior Advancement of the Tibial Tuberosity
|
鄭誠功; 姚南光; 劉華昌; CHENG, CHENG-KUNG; YAO, NAN-KUANG; LIU, HWA-CHANG |
| 國立成功大學 |
2009-08 |
Biomechanical analysis of axial distraction mobilization of the glenohumeral joint - A cadaver study
|
Hsu, Ar-Tyan; Chiu, Jing-Fang; Chang, Jia Hao |
| 國立臺灣師範大學 |
2016-08-04T09:11:55Z |
Biomechanical analysis of back kicks attack movement in Taekwondo
|
黃長福; Chen Lin Lee; Chenfu Huang |
| 淡江大學 |
2015-06 |
BIOMECHANICAL ANALYSIS OF BADMINTON DIFFERENT FORWARD STEPS
|
Lin, Heng-Wen; Pan, Kuang-Min; Tsai, Chien-Lu |
| 國立臺灣大學 |
1993 |
Biomechanical Analysis of Both Qanterior and Posterior Spinal Implants Using Porcine Corpectomy Model
|
陳博光; Shih, S. M.; Wong, T. H.; Chen, Po-Quang; Shih, S. M.; Wong, T. H. |
| 高雄醫學大學 |
2000 |
Biomechanical analysis of class II MOD cavity depth in a restored premolar
|
林峻立;張志涵;C.C.Ko;T.S.Lin;李惠娥;王兆祥 |
| 高雄醫學大學 |
2001 |
Biomechanical Analysis of Class II MOD cavity in a restored premolar
|
林峻立;李惠娥;王兆祥;張志涵 |
| 育達商業科技大學 |
1995 |
Biomechanical Analysis of Crouch Start with Different Height of Rear Block
|
Wang, Jin-Cherng |
| 淡江大學 |
2019-08-16 |
Biomechanical analysis of customized reconstruction thin plate based on buttress theory for the zygomaticomaxillary complex bone fracture
|
Wang, Y.T.;Wang, P.F.;Chen, C.T.;Chen, C.H.;Lin, C.L. |
| 國立成功大學 |
2019-01-3 |
Biomechanical analysis of different dynamic sitting techniques: an exploratory study
|
Li;Chun-Ting;Chen;Yen-Nien;Tseng;Yen-Ting;Tsai;Kuen-Horng |
| 國立臺灣科技大學 |
2019 |
BIOMECHANICAL ANALYSIS OF DIFFERENT SURGICAL STRATEGIES FOR THE TREATMENT OF ROTATIONALLY UNSTABLE PELVIC FRACTURE USING FINITE ELEMENT METHOD
|
Jhou, S.-Y.;Shih, K.-S.;Huang, P.-S.;Lin, F.-Y.;Hsu, C.-C. |
| 國立臺灣科技大學 |
2013 |
Biomechanical analysis of different types of pedicle screw augmentation: A cadaveric and synthetic bone sample study of instrumented vertebral specimens
|
Chao, K.-H.;Lai, Y.-S.;Chen, W.-C.;Chang, C.-M.;McClean, C.J.;Fan, C.-Y.;Chang, C.-H.;Lin, L.-C.;Cheng, C.-K. |
| 國立東華大學 |
2003 |
Biomechanical analysis of different windup techniques during softball pitching.
|
Wang, L. I.;Tu, H. P.;Lin, D. C.;Huang, C.; 王令儀 |
| 國立臺灣科技大學 |
2009 |
Biomechanical analysis of distal radius fractures using intramedullary Kirschner wires
|
Tsai W.-C.; Lin S.-C.; Hsiao C.-C.; Lu T.-W.; Chao C.-K.; Liu H.-C. |
| 臺大學術典藏 |
2020-02-26T01:37:26Z |
Biomechanical analysis of distal radius fractures using intramedullary Kirschner wires
|
Tsai, W.-C.; Lin, S.-C.; Hsiao, C.-C.; Lu, T.-W.; Chao, C.-K.; Liu, H.-C.; TUNG-WU LU |
| 臺大學術典藏 |
2008 |
Biomechanical analysis of distal radius fractures using intramedullary Kirschner wires
|
Liu, Hwa-Chang; Chao, Ching-Kong; Lu, Tung-Wu; Tsai, Wen-Chi;Lin, Shang-Chih;Hsiao, Chun-Ching;Lu, Tung-Wu;Chao, Ching-Kong;Liu, Hwa-Chang; Tsai, Wen-Chi; Lin, Shang-Chih; Hsiao, Chun-Ching |
| 國立臺灣大學 |
2008 |
Biomechanical analysis of distal radius fractures using intramedullary Kirschner wires
|
Tsai, Wen-Chi; Lin, Shang-Chih; Hsiao, Chun-Ching; Lu, Tung-Wu; Chao, Ching-Kong; Liu, Hwa-Chang |
| 國立臺灣大學 |
2009 |
Biomechanical Analysis of Distal Radius Fractures Using Intramedullary Kirschner Wires
|
林上智; 呂東武; 趙振綱; 劉華昌; LIN, SHANG-CHIH; LU, TUNG-WU; CHAO, CHING-KONG; LIU, HWA-CHANG |
| 國立臺灣海洋大學 |
2005 |
BIOMECHANICAL ANALYSIS OF EMG ACTIVITY BETWEEN BADMINTON SMASH AND DROP SHOT
|
Chien-Lu Tsai;Huang Kwei-Shu;Shaw-Shiun Chang |
| 國立臺灣師範大學 |
2016-08-04T09:11:50Z |
Biomechanical Analysis of Female Fast Pitch Softball Batting
|
郭展能; 黃長福; 郭明松 |
| 國立臺灣師範大學 |
2016-08-04T09:11:50Z |
Biomechanical Analysis of Female Fast Pitch Softball Batting
|
郭展能; 黃長福; 郭明松 |
| 國立政治大學 |
2011-05 |
Biomechanical analysis of foot with different foot arch heights: a finite element analysis
|
施世亮; Sun, Pi-Chang ; Shih, Shih-Liang ; Chen, Yu-Ling ; Hsu, Yu-Chun ; Yang, Ruei-Cheng ; Chen, Chen-Sheng |
| 國立成功大學 |
2022-05 |
Biomechanical analysis of force distribution in one-handed and two-handed adult chest compression: a randomised crossover observational study
|
Kao;Chia-Lung;Tsou;Jui-Yi;Hong;Ming-Yuan;Chang;Chih-Jan;Chi;Chih-Hsien |
| 國立成功大學 |
2022 |
Biomechanical analysis of force distribution in one-handed and two-handed child chest compression- a randomized crossover observational study
|
Tsou, J.-Y.;Kao, C.-L.;Tu, Y.-F.;Hong, M.-Y.;Su, F.-C.;Chi, Chi C.-H. |
| 國立成功大學 |
2024-07 |
Biomechanical analysis of four different meniscus suturing techniques for posterior meniscal root pull-out repair: A human cadaveric study
|
Chang;Ting-Yu;Yang;Tai-Hua;Lin;Kuan-Yu |
| 中國醫藥大學 |
2007-12-14 |
Biomechanical Analysis of implant body design and threaded design on mandibular edentulous restoration
|
黃恆立(Heng-Li Huang); 傅立志(Lih-Jyh Fuh); 許瑞廷(Jui-Ting Hsu) |
| 中國醫藥大學 |
2005-10 |
Biomechanical Analysis of Implant Designs on Mandibular Molar Edentulous Restoration
|
黃恆立 |
| 中國醫藥大學 |
2005-10 |
Biomechanical Analysis of Implant Designs on Mandibular Molar Edentulous Restoration?
|
黃恆立 |
| 中國醫藥大學 |
2003-03-11 |
Biomechanical Analysis of Implant Supported Partial Molar Restoration by Different Occlusal Types
|
黃恆立(Heng-Li Huang)*; (Chih-Han Chang); (Jehn-Shyun Huan); (Chun-Li Lin); (Wen Hui Chang); (Chi-Feng Yen.) |
| 國立交通大學 |
2017-04-21T06:55:54Z |
Biomechanical Analysis of Implanted Clavicle Hook Plates With Different Implant Depths and Materials in the Acromioclavicular Joint: A Finite Element Analysis Study
|
Lee, Cheng-Hung; Shih, Cheng-Min; Huang, Kui-Chou; Chen, Kun-Hui; Hung, Li-Kun; Su, Kuo-Chih |
| 高雄醫學大學 |
2003 |
Biomechanical analysis of knee osteoarthritis patients after the treatment of glucosamine
|
周伯禧;陳勝凱;周有禮;蘇方慶; Pei-Hsi Chou;Shen-Kai Chen;You-Li Chou;Siu-Wai Lee;Fong-Ching Su;Ting-Sheng Lin |
| 國立臺灣科技大學 |
2019 |
Biomechanical analysis of Lower Limb and Trunk Segments in Patients with Scoliosis during Side Bending and Level Walking - Implication for 3D Printed Brace Design
|
Ahmed, Muhammad Izhar |
| 東方設計學院 |
2001-12 |
Biomechanical analysis of lower loading during lifting tasks
|
Chou, P. H.; Chou, Y. L.; 何金山; Ho, Chin-Shan; Jiang, S. S.; (東方工商專科學校電子工程科) |
| 國立臺灣大學 |
1990 |
Biomechanical Analysis of Lumbar Intervertebral Motion Segment
|
Cheng, C. K.; 陳博光; Cheng, C. K.; Chen, Po-Quang |
| 國立臺灣大學 |
1990 |
Biomechanical Analysis of Lumbar Intervertebral Motion Segment
|
Cheng, C. K.; 陳博光; Cheng, C. K.; Chen, Po-Quang |
| 國立成功大學 |
2022-08 |
Biomechanical Analysis of Mandibular Implant-Assisted Removable Partial Denture with Distal Extension
|
Chen;Yung-Chung;Lin;Chi-Lun;Yu;Chen-Han;Chang;Hung-Chih;Lin;Yang-Ming;Lin;Jia-Wei |
| 國立臺灣大學 |
2008 |
Biomechanical Analysis of Nonconstrained and Semiconstrained Total Elbow Replacements: A Preliminary Report
|
Shih, K.-S.; Lu, T.-W.; Fu, Y.-C.; Hou, S.-M.; Sun, J.-S.; Cheng, C.-Y. |
| 臺大學術典藏 |
2020-02-07T03:43:42Z |
Biomechanical analysis of nonconstrained and semiconstrained total elbow replacements: A preliminary report
|
Shih K.-S.; Lu T.-W.; Fu Y.-C.; JUI-SHENG SUN; Hou S.-M.; Cheng C.-Y. |
| 臺大學術典藏 |
2020-02-26T01:37:28Z |
Biomechanical analysis of nonconstrained and semiconstrained total elbow replacements: A preliminary report
|
Shih, K.-S.; Lu, T.-W.; Fu, Y.-C.; Sun, J.-S.; Hou, S.-M.; Cheng, C.-Y.; TUNG-WU LU |
| 中國醫藥大學 |
2011-08-21 |
Biomechanical Analysis of Orthodontic Mini-screw in Different Diameter and Length
|
許瑞廷(Jui-Ting Hsu);黃恆立(Heng-Li Huang);(Chung-Kuei Hsueh);(Jin-Pin Chen);(Chi-Yin Chou);(Jyh-Siang Yeh);(Chein-Hung Yu) |
| 國立臺灣科技大學 |
2020 |
Biomechanical Analysis of Pullout Strength of Spinal Pedicle Screws with Full Insertion and Back-Out Using Finite Element Method
|
Chen, Y.-Y.;Hsu, C.-Y.;Shih, K.-S.;Hsu, C.-C. |
| 國立成功大學 |
2008-10 |
Biomechanical analysis of retrograde intramedullary nail fixation in distal femoral fractures
|
Chen, Shih-Hao; Yu, Tzai-Chiu; Chang, Chih-Han; Lu, Yuan-Chiao |
| 中山醫學大學 |
2021 |
Biomechanical analysis of rigid and non-rigid connection with implant abutment designs for tooth-implant supported prosthesis: A finite element analysis
|
Huang, YC; Ding, SJ; Yuan, CM; Yan, M |
| 臺大學術典藏 |
2020-09-29T03:36:15Z |
Biomechanical analysis of single-level interbody fusion with different internal fixation rod materials: A finite element analysis
|
Lin C.-L.; Chiang C.-J.; Chen C.-H.; Kuo Y.-J.; Hsieh Y.-Y.; FON-YIH TSUANG; Hsieh Y.-Y.;Fon-Yih Tsuang;Kuo Y.-J.;Chen C.-H.;Chiang C.-J.;Lin C.-L. |
| 國立東華大學 |
2003 |
Biomechanical analysis of skilled and unskilled jumpers during standing long jump.
|
Wang, L. I.;Lin, D. C.;Huang, C.; 王令儀 |
| 國立臺灣師範大學 |
2016-08-04T09:11:56Z |
Biomechanical Analysis of Standing Long Jump: A 3D Study
|
黃長福; C. Huang; R.H. Tang |
| 中山醫學大學 |
2021 |
Biomechanical analysis of subcondylar fracture fixation using miniplates at different positions and of different lengths
|
Huang, CM; Chan, MY; Hsu, JT; Su, KC |
| 中國醫藥大學 |
2012-03 |
Biomechanical analysis of the effects of implant diameter and bone quality in short implants placed in the atrophic posterior maxilla
|
(Chang SH);(Lin CL)*;薛水上(Hsue Shui-Sang);(Lin YS);(Huang SR) |
| 國立成功大學 |
2008-08 |
BIOMECHANICAL ANALYSIS OF THE ELBOW JOINT LOADING DURING PUSH-UP
|
Chou, Pei-Hsi; Lou, Shu-Zon; Chen, Shen-Kai; Chen, Hsin-Chieh; Wu, Tsung-Hsien; Chou, You-Li |
