| 國立臺灣大學 |
2010 |
Fabrication of a nano/micro hybrid lens using gas-assisted hot embossing with an anodic aluminum oxide (AAO) template
|
Wu, Jing-Tang; Chang, Wei-Yi; Yang, Sen-Yeu |
| 國立臺灣科技大學 |
2018 |
Fabrication of a Nonplanar Microfluidics by Using Sonication-Assisted Dissolution Technique
|
Chen, P.-C.;Chou, Chou C.-C. |
| 國立成功大學 |
2014-11 |
Fabrication of a Novel Diplexer Using Folded Open-Loop Ring Resonators and Microstrip Lines
|
Chen, Chia-Mao; Chang, Shoou-Jinn; Yang, Cheng-Fu |
| 大葉大學 |
2008-01 |
Fabrication of a novel piezoelectric actuator with high load-bearing capability
|
Cheng, C. H.;Tu, S. L. |
| 臺大學術典藏 |
2003 |
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
|
Hsieh, Hsyue-Jen; Lin, Mei-Chiao; Wang, Da-Ming; Wang, Yu-Chi; Wang, Yu-Chi; Lin, Mei-Chiao; Wang, Da-Ming; Hsieh, Hsyue-Jen |
| 國立臺灣大學 |
2003 |
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
|
Wang, Yu-Chi; Lin, Mei-Chiao; Wang, Da-Ming; Hsieh, Hsyue-Jen |
| 南台科技大學 |
2015-07-20 |
Fabrication of a Peristaltic Micropump with UV Curable Adhesive
|
Yi-chu Hsu;Jeffrey Levin |
| 國立臺灣大學 |
2002 |
Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete
|
TONG, J.-H.; WU, T.-T.; LEE, C.-K. |
| 國立臺灣大學 |
2002 |
Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete
|
Tong, J.-H.; Wu, T.-T.; Lee, C.-K. |
| 臺大學術典藏 |
2020-04-28T07:12:33Z |
Fabrication of a piezoelectric impact hammer and its application to the in-situ nondestructive evaluation of concrete
|
Tong, J.-H.; Wu, T.-T.; Lee, C.-K.; CHIH-KUNG LEE |
| 國立成功大學 |
2006-06-15 |
Fabrication of a planar-form screen-printed solid electrolyte modified Ag/AgCl reference electrode for application in a potentiometric biosensor
|
Liao, Wei-Yin; Chou, Tse-Chuan |
| 元智大學 |
2017-05-12 |
Fabrication of a poly(3-hydroxybutyrate) based membranes by electrospinning for rotator cuff tendon tear tissue engineering
|
賴冠安; Sun Y.-M. |
| 國立交通大學 |
2014-12-08T15:12:34Z |
Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method
|
Chung, Junwei; Hsu, Wensyang |
| 臺大學術典藏 |
2018-09-10T08:36:44Z |
Fabrication of a polymer/mediator composite modified electrode and its application to electrochemical detection of iodate
|
Li, T.-J.; Lin, C.-Y.; Balamurugan, A.; Kung, C.-W.; Wang, J.-Y.; Hu, C.-W.; Wang, C.-C.; Chen, P.-Y.; Vittal, R.; Ho, K.-C.; KUO-CHUAN HO |
| 國立高雄應用科技大學 |
2012-03 |
Fabrication of a prism structure on light guide plates with UV roll-to-plate imprinting process
|
YANG, JEN-CHIH; HUANG, CHUNG-CHING |
| 臺大學術典藏 |
2019-11-04T06:42:23Z |
Fabrication of a PVC-based solid-state Ag/AgCl reference electrode
|
Wu, Yi Min;LIN-CHI CHEN; Wu, Yi Min; LIN-CHI CHEN; Wu, Yi Min; LIN-CHI CHEN; LIN-CHI CHEN |
| 國立臺灣科技大學 |
2019 |
Fabrication of a pyramidal micro-needle array structure using 3D micro-lens mask lithography
|
Lin, T.-H.;Jiang, Jiang J.-M. |
| 亞洲大學 |
2017-01 |
Fabrication of a reticular poly;lactide-co-glycolide cylindrical scaffold for the in vitro development of microvascular networkds
|
Wang, Yen-Ting Tun;Yen-Ting Tung;Cheng-Chung;Cheng-Chung Chang;朱志成;Jyh-Cherng Ju;Gou-Jen Wang;Gou-Jen |
| 中國文化大學 |
2014-03 |
Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization
|
Su, Pi-Guey; Peng, Yu-Ting |
| 中國文化大學 |
2011-02-15 |
Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method
|
Su, PG (Su, Pi-Guey); Pan, TT (Pan, Te-Tsun) |
| 元智大學 |
2016-09-03 |
Fabrication of a sandwich construct scaffold by silk fibroin/bacterial cellulose-blended sponge and electrospun membrane for potential rotator cuff tendon tear (RCTT) tissue engineering
|
Guan-An Lai; Ya-Wen Liu; Chin-Hung Lan; Yi-Ting Ma; Wei-Quan Chen; Sun Y.-M. |
| 元智大學 |
2017-05-14 |
Fabrication of a scaffold by electrospun poly(3-hydroxybutyrate) based membranes for rotator cuff tendon tear tissue engineering
|
Guan-An Lai; Ya-Wen Liu; Chin-Hung Lan; Wei-Quan Che; Sun Y.-M. |
| 國立暨南國際大學 |
2008 |
Fabrication of a Screen-Printing Reference Electrode for Potentiometric Measurement?
|
孫台平; Sun, TP |
| 國立成功大學 |
2014-04 |
Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography
|
Tsai, Sung-Wen; Chen, Po-Yu; Lee, Yung-Chun |
| 臺大學術典藏 |
2021-12-21T23:17:19Z |
Fabrication of a selective sensor amplification probe modified with multi-component zn2sno4/sno2 heterostructured microparticles as a robust electrocatalyst for electrochemical detection of antibacterial drug secnidazole
|
Sukanya, Ramaraj; Balamurugan, Karuppaiah; Chen, Shen Ming; Rajakumaran, Ramachandran; Muthupandi, K.; Shim, Jae Jin; Breslin, Carmel B. |
| 國立交通大學 |
2014-12-08T15:47:13Z |
Fabrication of a sensitive germanium microbolometer for tympanic thermometry
|
Chen, CN; Shie, JS |
| 國立交通大學 |
2019-04-02T05:58:47Z |
Fabrication of a sensitive germanium microbolometer for tympanic thermometry
|
Chen, CN; Shie, JS |
| 淡江大學 |
2017-09-04 |
Fabrication of a single Ga-doped ZnS nanowires as high-gain photosensors by focused ion beam deposition
|
Yen SH, Hung YC, Su Y, Yeh PH, Wang CY. |
| 中國醫藥大學 |
2001-10-25 |
Fabrication of a specially designed bioreactor for the bioengineering of tendons and ligaments
|
曾國峰; 許弘昌(Horng-Chaung Hsu) |
| 國家衛生研究院 |
2010-11 |
Fabrication of a SU-8-based polymer-enclosed channel with a penetrating UV/ozone-modified interior surface for electrokinetic separation of proteins
|
Chang, CJ;Yang, CS;Lan, LH;Wang, PC;Tseng, FG |
| 中原大學 |
2007-08 |
Fabrication of a Super-Hydrophobic PVDF Membrane via Nonsolvent Induced PhaseSeparation
|
Kuo, Chun-Yin;Tsai, Hui-An;Wang, Da-Ming;Lai, Juin-Yih |
| 國立臺灣科技大學 |
2018 |
Fabrication of a thermally conductive silicone composite by incorporating surface-modified boron nitride
|
Kuo, C.-F.J.;Dewangga, G.R.S.;Chen, J.-B. |
| 淡江大學 |
2015-05-18 |
Fabrication of a totally renewable off-channel amperometric platform for microchip electrophoresis
|
Chi-Hao Chen; Ya-Ting Lin; Meng-Shan Lin |
| 國立交通大學 |
2018-08-21T05:56:45Z |
FABRICATION OF A TRANSPARENT STRUCTURED SUPEROMNIPHOBIC SURFACE USING A MULTIPLE PARTIAL EXPOSE METHOD
|
Lee, Meng-Shiue; Wu, Po-Han; Hsu, Wensyang |
| 臺大學術典藏 |
2018-09-10T08:10:00Z |
Fabrication of a ZnO film with a mosaic structure for a high efficient dye-sensitized solar cell
|
KUO-CHUAN HO;Ho, K.-C.;Vittal, R.;Kung, C.-W.;Chen, J.-G.;Chen, H.-W.;Lin, C.-Y.;Lai, Y.-H.; Lai, Y.-H.; Lin, C.-Y.; Chen, H.-W.; Chen, J.-G.; Kung, C.-W.; Vittal, R.; Ho, K.-C.; KUO-CHUAN HO |
| 國立成功大學 |
2017-02-25 |
Fabrication of Ag/ZnO/reduced graphene oxide nanocomposite for SERS detection and multiway killing of bacteria
|
Ko;Chi, Ya;Fang;Yi, Hong;Chen;Hwang, Dong |
| 國立交通大學 |
2019-05-02T00:25:56Z |
Fabrication of Ag2O/TiO2 composites on nanographene platelets for the removal of organic pollutants: Influence of oxidants and inorganic anions
|
Saleh, Rosari; Taufik, Ardiansyah; Prakoso, Suhendro Purbo |
| 國立交通大學 |
2014-12-08T15:30:48Z |
Fabrication of AlGaN/GaN High Electron Mobility Transistors (HEMTs) on Silicon Substrate with Slant Field Plates Using Deep-UV Lithography Featuring 5W/mm Power Density at X-band
|
Chang, Chia-Hua; Hsu, Heng-Tung; Huang, Lu-Che; Chiang, Che-Yang; Chang, Edward Yi |
| 元智大學 |
2012-12-04 |
Fabrication of AlGaN/GaN High Electron Mobility Transistors (HEMTs) on Silicon Substrate with Slant Field Plates Using Deep-UV Lithography Featuring 5W/mm Power Density at X-band
|
CHIA-HUA CHANG; Heng-Tung Hsu; Lu-Che Huang; Che-Yang Chiang; Edward Yi Chang |
| 元智大學 |
2012-12-04 |
Fabrication of AlGaN/GaN High Electron Mobility Transistors (HEMTs) on Silicon Substrate with Slant Field Plates Using Deep-UV Lithography Featuring 5W/mm Power Density at X-band
|
CHIA-HUA CHANG; Heng-Tung Hsu; Lu-Che Huang; Che-Yang Chiang; Edward Yi Chang |
| 元智大學 |
2012-12-04 |
Fabrication of AlGaN/GaN High Electron Mobility Transistors (HEMTs) on Silicon Substrate with Slant Field Plates Using Deep-UV Lithography Featuring 5W/mm Power Density at X-band
|
CHIA-HUA CHANG; Heng-Tung Hsu; Lu-Che Huang; Che-Yang Chiang; Edward Yi Chang |
| 國立臺灣海洋大學 |
2014 |
Fabrication of Aligned Carbon Nanotube/Polycaprolactone/Gelatin Nanofibrous Matrices for Schwann Cell Immobilization
|
Shiao-Wen Tsai;Chun-Chiang Huang;Lih-Rou Rau;Fu-Yin Hsu |
| 國立交通大學 |
2014-12-08T15:21:33Z |
Fabrication of aligned single wall carbon nanotube absorbers for high power passive mode-locked Nd:GdVO(4) laser
|
Cheng, S. Y.; Wang, Y. G.; Yu, P.; Cheng, Y. J.; Tang, J.; Chen, H. R.; Hsieh, W. F. |
| 國立交通大學 |
2019-04-02T05:57:52Z |
Fabrication of aligned single wall carbon nanotube absorbers for high power passive mode-locked Nd:GdVO4 laser
|
Cheng, S. Y.; Wang, Y. G.; Yu, P.; Cheng, Y. J.; Tang, J.; Chen, H. R.; Hsieh, W. F. |
| 國立成功大學 |
2005-07-14 |
Fabrication of aligned TiO2 nanostructured arrays using a one-step templating solution approach
|
Lee, Jian-Hong; Leu, Ing-Chi; Hsu, Ming-Chi; Chung, Yi-Wen; Hon, Min-Hsiung |
| 國立聯合大學 |
2005 |
Fabrication of Aligned TiO2 One-Dimensional Nanostructured Arrays Using a One-step Templating Solution Approach,
|
J. H. Lee, I. C. Leu*, M. C. Hsu, Y. W. Chung and M. H. Hon, |
| 國立臺灣大學 |
2009 |
Fabrication of alignment layer free flexible liquid crystal cells using thermal nanoimprint lithography
|
Lin, Tzu-Chieh; Yu, Shao-Chi; Chen, Pei-Shiang; Chi, Kai-Yuan; Pan, Han-Chang; Chao, Chih-Yu |
| 臺大學術典藏 |
2018-09-10T07:29:24Z |
Fabrication of alignment layer free flexible liquid crystal cells using thermal nanoimprint lithography
|
Chao, C.-Y.; CHIH-YU CHAO; Lin, T.-C.;Yu, S.-C.;Chen, P.-S.;Chi, K.-Y.;Pan, H.-C.;Chao, C.-Y.; Lin, T.-C.; Yu, S.-C.; Chen, P.-S.; Chi, K.-Y.; Pan, H.-C. |
| 國立臺灣大學 |
1993 |
Fabrication of Almodified Acicular α-Fe Particles
|
郭博成; Lin, C. H.; Chen, S. C.; Shih, C. S.; Chin, T. S.; Kuo, Po-Cheng; Lin, C. H.; Chen, S. C.; Shih, C. S.; Chin, T. S. |
| 國立交通大學 |
2018-08-21T05:53:38Z |
Fabrication of alpha-MnO2 nano-particle and nano-rod composite electrodes for capacitive deionization
|
Chen, Yi-Han; Juang, Yaju; Huang, Chihpin |