| 東海大學 |
2010 |
Finite element and Weibull analyses to estimate failure risks in the ceramic endocrown and classical crown for endodontically treated maxillary premolar
|
Lin, C.-L., Chang, Y.-H., Chang, C.-Y., Pai, C.-A., Huang, S.-F. |
| 國立臺灣海洋大學 |
2011-12 |
Finite Element Based Fatigue Life Estimation of the Solder Joints with Effect of Intermetallic Compound Growth
|
Chiou;Yung-Chuan;Jen;Yi-Ming;Huang;Shih-Hsiang;; 任貽明 |
| 國立成功大學 |
2021-02 |
Finite Element Based Input Shaping Design for Suppressing Motion-Induced Vibrations
|
Chen;Weiju;Chen;Kuo-Shen |
| 國立成功大學 |
2021 |
Finite Element Based Input Shaping Design for Suppressing Motion-Induced Vibrations [有限元素分析於撓性長距離移動系統之輸入修正設計與應用]
|
Chen, W.;Chen, K.-S. |
| 國立交通大學 |
2014-12-08T15:35:08Z |
Finite element comparison of retrograde intramedullary nailing and locking plate fixation with/without an intramedullary allograft for distal femur fracture following total knee arthroplasty
|
Chen, Shih-Hao; Chiang, Ming-Chieh; Hung, Ching-Hua; Lin, Shang-Chih; Chang, Hsiao-Wei |
| 國立臺灣科技大學 |
2014 |
Finite element comparison of retrograde intramedullary nailing and locking plate fixation with/without an intramedullary allograft for distal femur fracture following total knee arthroplasty
|
Chen, S.-H.;Chiang, M.-C.;Hung, C.-H.;Lin, S.-C.;Chang, H.-W. |
| 國立臺灣海洋大學 |
1997-06 |
Finite element computations for unsteady fluid and elastic membrane interaction problems
|
S.-J. Liang;G. P. Neitzel;C. K. Aidun |
| 國立臺灣大學 |
1999 |
Finite Element Contact Stress Analysis of the Tibiofemoral Joint
|
陳文斌; 江清泉; 黃偉良; 簡秋記; CHEN, WENG-PIN; JIANG, CHING-CHUAN; HUANG, WOEI-LIANG; CHIEN, CHYOU-CHI |
| 臺大學術典藏 |
2018-09-10T07:47:12Z |
Finite element contact stress analysis of the tibiofemoral joint
|
Chen, W.-P.;Jiang, C.-C.;Huang, W.-L.;Chien, C.-C.; Chen, W.-P.; Jiang, C.-C.; Huang, W.-L.; Chien, C.-C.; CHING-CHUAN JIANG |
| 朝陽科技大學 |
2014-12-27 |
Finite Element Deformation Analysis of Fuel Cell Metal Bipolar Plate with Distorted Design Features
|
陳韋任; Chen, Shou-I; Li, Ming-Lung; Song, Yu-Lin; Chen, Yu-Hsu; Chen, Wei-Jen |
| 國立成功大學 |
2004-04 |
Finite element dynamic analysis of orthotropic cylindrical shells with a constrained damping layer
|
Wang, Horng-Jou; Chen, Lien-Wen |
| 國立成功大學 |
2007-05 |
Finite element dynamic analysis of orthotropic sandwich plates with an electrorheological fluid core layer
|
Yeh, Jia-Yi; Chen, Lien-Wen |
| 國立成功大學 |
2003-11 |
Finite element dynamic analysis of rotating orthotropic sandwich annular plates
|
Wang, Horng-Jou; Chen, Yu-Ren; Chen, Lien-Wen |
| 淡江大學 |
2006-01 |
Finite Element Frequency-domain Acoustic Analysis of Open-Cell Plastic Foams
|
Tsay, H.-S.; Yeh, F.-H. |
| 國立成功大學 |
2019 |
Finite Element Input Shaping Design for Vibration Suppression of Mechatronics Systems
|
Chen, W.;Chen, K.-S.;Tsai, M.-C. |
| 國立成功大學 |
2009-04-10 |
Finite element investigation of traffic induced vibrations
|
Ju, Shen-Haw |
| 淡江大學 |
2009 |
Finite element method for dual flexible rotary system
|
洪于棻; Hung, Yu-fen |
| 南亞技術學院 |
1990-09 |
Finite Element Model of Thin-Walled Laminated Orthotropic Beams for Static Analysis
|
鍾雲吉 |
| 南亞技術學院 |
1992-12 |
Finite Element Model of Thin-Walled Laminated Orthotropic Beams forWtatic Analysis
|
鍾雲吉 |
| 國立成功大學 |
2017 |
Finite element model updating of multi-span steel-arch-steel-girder bridges based on ambient vibrations
|
Hou, T.-C.;Gao, W.-Y.;Chang, Chang C.-S.;Zhu, G.-R.;Su, Y.-M. |
| 國立成功大學 |
2008-11 |
Finite element model verification for packaged printed circuit board by experimental modal analysis
|
Lee, Ying-Chih; Wang, Bor-Tsuen; Lai, Yi-Shao; Yeh, Chang-Lin; Chen, Rong-Sheng |
| 臺大學術典藏 |
2018-09-10T05:53:35Z |
Finite element model verification for the use of piezoelectric sensor in structural modal analysis
|
Wang, B.-T.; Chen, P.-H.; Chen, R.-L.; PING-HEI CHEN |
| 國立臺灣大學 |
1985-1986 |
Finite Element Modeling and Drop Resonance Spectroscopy Analysis of a Printer Hammer.
|
Wang, S.; Chang, S. H.; Crawforth, L.; 李學養; Munce, C.; Wang, S.; Chang, S. H.; Crawforth, L.; Lee, Share-Young; Munce, C. |
| 國立勤益科技大學 |
2007 |
Finite Element Modeling for the Analysis of Cracked Cylindrical Pipes
|
Sung, Wen-Pei; Go, Cheer-Germ; Shih, Ming-Hsiang |
| 臺北醫學大學 |
2008 |
Finite element modeling in implant dentistry
|
黃豪銘; Geng J; Yan W; Xu W; Tan KBC; Huang HM; Lee SY et al |
| 國立成功大學 |
2018-07-15 |
Finite element modeling of a single-point multi-segment mooring in water waves
|
Lee;Jaw-Fang;Tu;Lih-Fu |
| 臺大學術典藏 |
2018-09-10T15:21:57Z |
Finite element modeling of electrically rectified piezoelectric energy harvesters
|
YI-CHUNG SHU;Shu, Y.C.;Wu, P.H.; Wu, P.H.; Shu, Y.C.; YI-CHUNG SHU |
| 國立交通大學 |
2019-04-02T06:04:41Z |
FINITE ELEMENT MODELING OF ELECTROMAGNETIC-COILS TARGETING SYSTEM FOR LOCATING DISTAL SCREW-HOLE IN INTRAMEDULLARY INTERLOCKING-NAIL SURGERY
|
Cheng, Ya-Wen; Chen, Po-Wen; Wong, Tze-Hong; Chen, Chin-Chung; Hsu, Wensyang; Chung, Tien-Kan |
| 國立成功大學 |
2015-07-16 |
Finite element modeling of hyper-viscoelasticity of peripheral nerve ultrastructures
|
Chang, Cheng-Tao; Chen, Yu-Hsing; Lin, Chou-Ching K.; Ju, Ming-Shaung |
| 淡江大學 |
2015-11-20 |
Finite Element Modeling of Mechanical Behavior Variation of Collagen Fibrils under Different Concentration of Saline Solutions
|
Chuang, B.-S.; Chen, P.-J.; Wang, C.-K. |
| 大葉大學 |
2001 |
Finite Element Modeling of MFC/AFC Actuators and Performance of MFC
|
Ro, Jeng-Jong |
| 臺大學術典藏 |
2018-09-10T14:56:41Z |
Finite element modeling of piezoelectric energy harvesters
|
YI-CHUNG SHU;Shu, Y.C.;Wu, P.H.; Wu, P.H.; Shu, Y.C.; YI-CHUNG SHU |
| 國立臺灣大學 |
1987-08 |
Finite Element Modeling of Reservoir Dynamics
|
楊德良; 楊德良; Young, Der-Liang; Young, Der-Liang |
| 義守大學 |
2013-02 |
Finite Element Modeling of SnAgCu Alloy on 3D Package-on-Package (POP) Subjected to Board Level Drop Test
|
Hsiang-Chen Hsu;Shen-Wen Ju;Shih-Jeh Wu;Miin-Shyan Bair |
| 國立成功大學 |
2016-12 |
Finite element modeling of superplastic co-doped yttria-stabilized tetragonal-zirconia polycrystals
|
Hu, Hsuan-Teh; Tseng, Shih-Tsung; Hu, Alice |
| 國立交通大學 |
2014-12-08T15:02:52Z |
Finite element modelling for land displacements due to pumping
|
Yeh, HD; Lu, RH; Yeh, GT |
| 國立交通大學 |
2014-12-08T15:01:13Z |
Finite element modelling for the impact dynamic response of composite stiffened shells
|
Goswami, S |
| 國立交通大學 |
2019-04-02T05:59:27Z |
Finite element modelling for the impact dynamic response of composite stiffened shells
|
Goswami, S |
| 臺北醫學大學 |
2008 |
Finite Element Modelling in Implant Dentistry
|
李勝揚; Geng J; Yan W; Xu W; Keson B. C. Tan; Huang H-M; Lee S-Y; Xu-H; Huang-L; Chen-J |
| 國立交通大學 |
2014-12-08T15:21:24Z |
Finite Element Models of Neuron Electrode Sealing Interfaces
|
Choi, Charles T. M.; You, Shan-Jen |
| 義守大學 |
2008-08 |
Finite Element Prediction of Stack-Die Packages under Board Level Drop Test
|
Hsiang-Chen Hsu;Yu-Chia Hsu;Chan-Lin Yeh;Yi-Shao Lai |
| 國立勤益科技大學 |
2011-02 |
Finite element prediction of the lens shape of molded optical glass lenses
|
洪榮崇 |
| 國立交通大學 |
2014-12-08T15:37:56Z |
Finite element prediction of the lens shape of moulded optical glass lenses
|
Tsai, Y-C; Hung, C.; Hung, J-C; Tseng, S-F |
| 國立勤益科技大學 |
2010-12 |
Finite element prediction on the machining stability of milling machine with experimental verification
|
洪瑞斌 |
| 大葉大學 |
2010-12-01 |
Finite element prediction on the machining stability of milling machine with experimental verification
|
Hung, Jui-Pin;Lai, Yuan-Lung |
| 臺大學術典藏 |
2020-04-28T07:15:09Z |
Finite element reliability of geometrically nonlinear uncertain structures
|
PEI-LING LIU; Der Kiureghian, A.; Liu, P.-L. |
| 臺大學術典藏 |
1989-08 |
Finite Element Reliability of Two Dimensional Continua with Geometrical Nonlinearity.
|
Der Kiureghian, A.; Liu, Pei-Ling; Der Kiureghian, A.; 劉佩玲; Liu, Pei-Ling; Der Kiureghian, A. |
| 國立臺灣大學 |
1989-08 |
Finite Element Reliability of Two Dimensional Continua with Geometrical Nonlinearity.
|
劉佩玲; Der Kiureghian, A.; Liu, Pei-Ling; Der Kiureghian, A. |
| 朝陽科技大學 |
2020-02-01 |
Finite Element Resonance Analysis of the Complex Structure of a Cross-Cut Saw Machine
|
趙方麟;陳維隆 |
| 國立成功大學 |
2009-06 |
Finite element simulation for estimating the mechanical properties of multi-walled carbon nanotubes
|
Fan, C. W.; Liu, Y. Y.; Hwu, Chyanbin |
