| 國立臺灣科技大學 |
2009 |
Flow and performance of biological safety cabinet
|
Huang R. F. ; Chou C. I. |
| 臺大學術典藏 |
2005 |
Flow and segregation control by accelerated rotation for vertical Bridgman growth of cadmium zinc telluride: ACRT versus vibration
|
Lan, C.W.; Lan, C.W.; LanCW |
| 國立臺灣大學 |
2005 |
Flow and segregation control by accelerated rotation for vertical Bridgman growth of cadmium zinc telluride: ACRT versus vibration
|
Lan, C.W. |
| 國立臺灣科技大學 |
2019 |
Flow and temperature characteristics of a 15° backward-inclined jet flame in crossflow
|
Hsu, C.M.;Mosiria, D.B.;Jhan, W.C. |
| 臺大學術典藏 |
2020-05-14T06:59:30Z |
Flow around a heated circular cylinder in the laminar and transitional regimes
|
Wu; M.H.; Wang; A.-B.; AN-BANG WANG |
| 國立成功大學 |
2019 |
Flow around a Heavy Vehicle in a Side Wind
|
Levin, J.;Chen, S.-H. |
| 國立臺灣科技大學 |
2003 |
Flow assignment of a stochastic flow network with multiple node pairs
|
Lin, Yi-Kuei |
| 淡江大學 |
1998-02 |
Flow at 90° equal-width open-channel junction
|
許中杰; Hsu, Chung-chieh; Wu, Feng-shuai; Lee, Wen-jung |
| 中華大學 |
2013 |
Flow Behavior and Microstructural Evolution of 316 Stainless Steel under Hot Compression
|
吳泓瑜; Wu, Horng-yu |
| 中華大學 |
2013 |
Flow Behavior and Microstructural Evolution of 316 Stainless Steel under Hot Compression
|
吳泓瑜; Wu, Horng-yu |
| 國立臺灣科技大學 |
2014 |
Flow behavior around a square cylinder subject to modulation of a planar jet issued from upstream surface
|
Huang, R.F.;Hsu, C.M.;Chiu, P.C. |
| 國立中山大學 |
2002 |
Flow Behavior of Aluminum-Based Materials at Ultrahigh Temperatures in the Presence of a Liquid Phase
|
B.Y. Lou;J.C. Huang;T.D. Wang;T.G. Langdon |
| 中華大學 |
2010 |
Flow Behavior of AZ31B-O Mg Alloy Sheet under Tension at Elevated Temperatures
|
吳泓瑜; Wu, Horng-yu |
| 國立高雄第一科技大學 |
1999.12 |
Flow behaviour of high strength high-performance concrete
|
Yen, Tsong;Tang, Chao-Wei;Chang, Chao-Shun;Chen, Kuang-Hong |
| 南亞技術學院 |
2009/11/13 |
Flow behaviours of non-spherical particles in a model silo
|
鍾雲吉 |
| 國立成功大學 |
1989 |
Flow Behind an Axisymmetric Bluff Body in a Circular-to-Rectangular Transition Duct
|
呂宗行 |
| 國立勤益科技大學 |
2000-03 |
Flow bifurcation and heat transfer in a spherical gap
|
Luo, W.-J.;Yang, R.-J. |
| 國立成功大學 |
2000-03 |
Flow bifurcation and heat transfer in a spherical gap
|
Luo, W. J.; Yang, Ruey-Jen |
| 國立成功大學 |
2004-06 |
Flow bifurcation and transition in a gap between two-rotating spheres
|
Luo, W. J.; Yang, Ruey-Jen |
| 國立勤益科技大學 |
2002-11 |
Flow Bifurcations in a Thin Gap Between Two Rotating Spheres
|
Yang, R.-J.;Luo, W.-J. |
| 國立成功大學 |
2002-12 |
Flow bifurcations in a thin gap between two rotating spheres
|
Yang, Ruey-Jen; Luo, W. J. |
| 國立臺灣科技大學 |
2013 |
Flow box test for viscosity of soil in plastic and viscous liquid states
|
Widjaja, B.;Lee, S.H.-H. |
| 國立交通大學 |
2014-12-08T15:31:37Z |
FLOW CALCULATION IN A LOOP-SCAVENGED TWO-STROKE MOTORED ENGINE
|
Tsui, Y. -Y.; Cheng, H. -P. |
| 國立交通大學 |
2014-12-12T02:16:31Z |
FLOW CALCULATION IN TWO - STROKE ENGINE WITH DIFFERENT COMBUSTION CHAMBER
|
鄭鴻斌; Zheng, Hong-Bin; 崔燕勇; Cui, Yan-Yong |
| 淡江大學 |
1993-08 |
Flow cell光譜分析方法應用於工廠水質監測之研究
|
許道平 |
| 淡江大學 |
1993-05 |
FLOW CELL光譜分析方法應用於工廠水質監測之研究
|
黃以棽; 許道平 |
| 臺大學術典藏 |
2018-09-10T06:58:25Z |
Flow channeling effect on a regenerator's thermal performance
|
Chang, Z.-C.; Chen, P.-H.; PING-HEI CHEN |
| 國立臺灣大學 |
1998 |
Flow Channeling Effect on the Regenerators Thermal Performance
|
Chang, Z. C.; Chen, P. H. |
| 國立臺灣科技大學 |
2016 |
Flow characteristics and drag force of a square cylinder in crossflow modulated by a slot jet injected from upstream surface
|
Hsu, C.M;Huang, R.F;Chung, H.C. |
| 淡江大學 |
2006-12 |
Flow Characteristics and Heat Transfer in Side-opened End-sealed Duct Flows without and with Turbulators
|
陳增源; 郭哲翔 |
| 國立成功大學 |
2007-02 |
Flow characteristics and micro-scale metallic particle formation in the laser supersonic heating technique
|
Lin, Shih-Lung; Lin, Jehnming |
| 國立成功大學 |
2012-10 |
Flow characteristics and mixing performance of electrokinetically driven non-Newtonian fluid in contraction-expansion microchannel
|
Cho, Ching-Chang; Chen, Chieh-Li; Chen, Cha'o-Kuang |
| 國立臺灣科技大學 |
2014 |
Flow characteristics and robustness of an inclined quad-vortex range hood
|
Chen, J.-K.;Huang, R.F. |
| 臺大學術典藏 |
2018-09-10T14:50:14Z |
Flow characteristics and robustness of an inclined quad-vortex range hood
|
Chen, J.-K. ; Huang, R.F.; JIA-KUN CHEN |
| 臺大學術典藏 |
2022-03-30T05:44:45Z |
Flow characteristics and robustness of an inclined quad-vortex range hood
|
JIA-KUN CHEN; Huang R.F. |
| 國立臺灣科技大學 |
1997 |
Flow characteristics and shear-layer vortex shedding of double concentric jets
|
Huang R. F. ; Lin C. L. |
| 國立臺灣科技大學 |
2015 |
Flow characteristics and spillage mechanisms of an inclined quad-vortex range hood subject to influence from draft
|
Huang, R.F.;Chen, J.-K.;Lin, J.-H. |
| 臺大學術典藏 |
2018-09-10T15:27:35Z |
Flow characteristics and spillage mechanisms of an inclined quad-vortex range hood subject to influence from draft
|
Huang, R.F. ; Chen, J.-K. ; Lin, J.-H.; JIA-KUN CHEN |
| 臺大學術典藏 |
2022-03-30T05:44:44Z |
Flow characteristics and spillage mechanisms of an inclined quad-vortex range hood subject to influence from draft
|
Huang R.F.; JIA-KUN CHEN; Lin J.-H. |
| 臺大學術典藏 |
2022-03-30T05:44:48Z |
Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods
|
Huang R.F.; Nian Y.-C.; JIA-KUN CHEN |
| 國立臺灣科技大學 |
2012 |
Flow Characteristics and Spillage Mechanisms of Wall-Mounted and Jet-Isolated Range Hoods Subject to Influence from Cross Draft
|
Chen, Jia-Kun;Huang, Rong Fung;Peng, Kuan-Lin |
| 國立臺灣科技大學 |
2012 |
Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods subject to influence from cross draft
|
Chen, J.-K.;Huang, R.F.;Peng, K.-L. |
| 國立臺灣大學 |
2012 |
Flow Characteristics and Spillage Mechanisms of Wall-Mounted and Jet-Isolated Range Hoods Subject to Influence from Cross Draft
|
Chen, Jia-Kun; Huang, Rong Fung; Peng, Kuan-Lin |
| 臺大學術典藏 |
2018-09-10T09:14:19Z |
Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods subject to influence from cross draft
|
Chen, Jia-Kun;Huang, Rong Fung;Peng, Kuan-Lin; Chen, Jia-Kun; JIA-KUN CHEN; Huang, Rong Fung; Peng, Kuan-Lin |
| 臺大學術典藏 |
2022-03-30T05:44:47Z |
Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods subject to influence from cross draft
|
JIA-KUN CHEN; Huang R.F.; Peng K.-L. |
| 國立臺灣科技大學 |
2010 |
Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods.
|
Chen J.K.; Huang R.F.; Dai G.Z. |
| 國立臺灣科技大學 |
2018 |
Flow characteristics and velocity fields of swirling double-concentric jets at high central jet Reynolds numbers
|
Le, M.D.;Hsu, C.M.;Huang, R.F. |
| 國立臺灣大學 |
1984 |
Flow Characteristics around an Aeration Device in Tunnel Spillway
|
顏清連; Wang, R. Y.; Ho, S. Y.; Cheng, K. C.; Yen, Chin-Lien; Wang, R. Y.; Ho, S. Y.; Cheng, K. C. |
| 國立臺灣科技大學 |
2014 |
Flow characteristics around juncture of a circular cylinder mounted normal to a flat plate
|
Huang, R.F.;Hsu, C.M.;Lin, W.C. |
| 國立成功大學 |
2008-07 |
Flow characteristics in a microchannel system integrated with arrays of micro-pressure sensors using a polymer material
|
Ko, H. S.; Liu, C. W.; Gau, Chie; Jeng, D. Z. |