中原大學 |
2007-1-19 |
Fabricating skin-free membranes by in-situ casting two processes
|
S. T. Kao;K. R. Lee;D. M. Wang;J. Y. Lai; |
中原大學 |
2008-1-18 |
Fabricating skin-free membranes by wet phase inversion method
|
S. T. Kao;W. C. Chao;K. R. Lee;D. M. Wang;J. Y. Lai |
國立臺灣大學 |
2006-05 |
Fabricating subwavelength array structures using a near-field photolithographic method
|
Chang, W.L.; Chang, Y.J.; Wei, P.K.; Tsao, and P. -H. |
國立臺灣海洋大學 |
2006-03 |
Fabricating Subwavelength Array Structures Using a Near-field Photolithographic Method
|
Pei-Kuen Wei; Wei-Lun Chang; Yu-Jen Chang |
東海大學 |
2011-06 |
Fabricating textile-bricks: learning parametric design by simulating natural patterns.
|
邱浩修 |
國立交通大學 |
2014-12-08T15:37:09Z |
Fabricating thin-film transistors on plastic substrates using spin etching and device transfer
|
Wang, SC; Yeh, CF; Hsu, CT; Lou, JC |
國立成功大學 |
2016-06-17 |
Fabricating translucent polydimethylsiloxane (PDMS) super-hydrophobic surface greenly by facile water-dissolved fillers
|
Lin, Yung-Tsan; Chou, Jung-Hua |
國立臺灣科技大學 |
2010 |
Fabricating ZnO nanowires-based humidity sensor via dielectrophoresis method
|
Wang Y.; Yeow J.T.W.; Yin Y.-T.; Chen L.-Y. |
國立成功大學 |
2015-01-01 |
Fabrication AlGaN/GaN MIS UV Photodetector by H2O2 Oxidation
|
Liu, Han-Yin; Hsu, Wei-Chou; Chou, Bo-Yi; Wang, Yi-Hsuan |
淡江大學 |
2019-04-16 |
Fabrication and 3D Patterning of Bio-Composite Consisting of Carboxymethylated Cellulose Nanofibers and Cobalt Ferrite Nanoparticles
|
Pong, W.F. |
國立交通大學 |
2014-12-08T15:02:23Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
國立交通大學 |
2019-04-02T05:58:28Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
國立中山大學 |
2006 |
Fabrication and analysis of a magnetic self-power microgenerator
|
C.T. Pan; Y.M. Hwang; H.L. Hu; H.C. Liu |
國立成功大學 |
2008-11 |
Fabrication and analysis of a micro-machined tri-axis gyroscope
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
淡江大學 |
2009 |
Fabrication and analysis of aluminum vapor chamber heat spreaders
|
洪裕勛; Hung, Yu-hsun |
國立高雄師範大學 |
1995 |
Fabrication and analysis of camel-gate field-effect transistors (CAMFET’s) with active doping channel profiles
|
Jung-Hui Tsai;Wen-Chau Liu;Lih-Wen Laih;Kong-Beng Thei;Cheng-Zu Wu;Wen-Shiung Lour;Rong-Chau Liu; 蔡榮輝 |
國立聯合大學 |
2006 |
Fabrication and analysis of flow rate of parallel piezoelectric micropumps
|
C. H. Chang, H. Hocheng, Y. H. Guu |
淡江大學 |
2008-11 |
Fabrication and Analysis of Heat Dissipation Module for High-Power Light Emitting Diode Streetlamp
|
康尚文; Kang, Shung-wen; Chien, Kun-cheng; Chou, Yen-chih |
國立成功大學 |
2008-02-15 |
Fabrication and analysis of ionic conductive polymer films for micro drug delivery systems
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
國立臺灣科技大學 |
2009 |
Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining
|
Lee J.-L.; Shen Y.-K.; Lin Y.; Teng P.-T.; Huang C.-M. |
國立成功大學 |
2019-11 |
Fabrication and analysis of PiG-based LEDs with WO3-doped TeO2-based glass
|
Nien;Li-Fang;Huang;Chien-Hao;Chiang;Chung-Hao;Chen;Chen-Jung;Hong;Cheng-Shong;Nien;Hsiau-Hsian;Chu;Sheng-Yuan |
淡江大學 |
2008 |
Fabrication and analysis of pulsating heat pipes (PHPs)
|
林玉興; Lin, Yu-hsing |
中原大學 |
2002-05 |
Fabrication and Analysis of SnO/sub 2//ITO/Glass Array pH Sensor
|
熊慎幹;Chiang, Jing-Sheng;Chou, Jung-Chuan;Pan, Chung-We;Sun, Tai-Ping Hsiung, Shen-Kan |
國立成功大學 |
2007-03 |
Fabrication and analysis of the reflowed microlens arrays using JSR THB-130 N photoresist with different heat treatments
|
Chung, Chen-Kuei; Hong, Y. Z. |
國立彰化師範大學 |
2008 |
Fabrication and analysis of ZnO thin film bulk acoustic resonators
|
Lin, Yi- Cheng ; Hong, C. R. ; Chuang, H. A. |