| 國立臺灣海洋大學 |
2016-11 |
Fabrication of Cu2ZnSnSe4 solar cells through multi-step selenization of layered metallic precursor film
|
W. C. Chen; V. Tunuguntla; H. W. Li; C. Y. Chen; J. S. Hwang; L. C. Chen; K. H. Chen; C. H. Lee; S. S. Li |
| 國立彰化師範大學 |
1994 |
Fabrication of Current Lead for High-Tc Superconductors
|
Horng, Lance |
| 中國醫藥大學 |
2001-04-07 |
Fabrication of custom made film holders for assessing peri-implant crestal bone resorption.
|
傅立志(Lih-Jyh Fuh); 傅沐杰(Mu-Chieh Fu) |
| 臺大學術典藏 |
2018-09-10T08:14:22Z |
Fabrication of deep si trenches by self-assembled wet chemical etching process
|
Hung, S.C.;Shiu, S.C.;Chao, J.J.;Lin, C.F.; Hung, S.C.; Shiu, S.C.; Chao, J.J.; Lin, C.F.; CHING-FUH LIN |
| 國立成功大學 |
2005 |
Fabrication of delta-Bi2O3 nanowires
|
Huang, C. C.; Leu, Ing-Chi; Fung, Kuan-Zong |
| 國立成功大學 |
2001-01 |
Fabrication of depletion-mode GaAs MOSFET with a selective oxidation process by using metal as the mask
|
Wu, Jau-Yi; Wang, Hwei-Heng; Wang, Yeong-Her; Houng, Mau-Phon |
| 國立臺灣科技大學 |
2017 |
Fabrication of device with poly(N-isopropylacrylamide)-b-ssDNA copolymer brush for resistivity study
|
Liu, Y.-Z.;Chen, M.-S.;Cheng, Cheng C.-C.;Chen, S.-H.;Chen, J.-K. |
| 國立高雄應用科技大學 |
2013 |
Fabrication of diamond conditioners by using a micro patterning and electroforming approach
|
Shih, Ching-Jui; Lin, Wei-Chih; Lin, Chao-Sung; Ou, Shih-Fu; Pan, Yung-Ning |
| 臺北醫學大學 |
2012 |
Fabrication of diamond conditioners by using a micro patterning and electroforming approach
|
Shih, Ching-Jui;Lin, Wei-Chih;Lin, Chao-Sung;Ou, Shih-Fu;Pan, Yung-Ning |
| 臺北醫學大學 |
2012 |
Fabrication of diamond conditioners by using a micro patterning and electroforming approach
|
Shih, Ching-Jui;Lin, Wei-Chih;Lin, Chao-Sung;Ou, Shih-Fu;Pan, Yung-Ning |
| 國立成功大學 |
2008-04 |
Fabrication of diamond micro-structures by ink-jet printed diamond seeding and microwave plasma assisted chemical vapor deposition
|
Chen, Yu-Chun; Tzeng, Yonhua; Davray, Ahbishek; Cheng, An-Jen; Ramadoss, Ramesh; Park, Minseo |
| 國立成功大學 |
2007-03 |
Fabrication of dicing-free vertical-structured high-power GaN-based light-emitting diodes with selective nickel electroplating and patterned laser liftoff techniques
|
Chen, Shiue-Lung; Wang, Shui-Jinn; Uang, Kai-Ming; Chen, Tron-Min; Lee, Wei-Chi; Liou, Bor-Wen |
| 臺大學術典藏 |
2009-01-21T07:58:50Z |
Fabrication of Diffractive Optical Elements Using the CMOS Process
|
Chang, Pei-Zen; Lee, Chi-Yuan; Chen, Hung-Lin; Dai, Ching-Liang; Chen, Hung-Lin; Lee, Chi-Yuan; Chang, Pei-Zen; Dai, Ching-Liang |
| 國立臺灣大學 |
2002 |
Fabrication of Diffractive Optical Elements Using the CMOS Process
|
Dai, Ching-Liang; Chen, Hung-Lin; Lee, Chi-Yuan; Chang, Pei-Zen |
| 臺大學術典藏 |
2006 |
Fabrication of diffractive optical lens for beam splitting using LIGA process
|
Yang, J.J.; Liao, Y.S.; Chen, C.F.; YUNN-SHIUAN LIAO |
| 國立中山大學 |
2003-06 |
Fabrication of digital sinusoidal gratings and precisely controlled diffusive flats and their application to highly accurate projected fringe profilometry
|
Wei-Hung Su; Hongyu Liu; Karl Reichard; Shizhuo Yin; Francis T.S. Yu |
| 國立臺灣科技大學 |
2010 |
Fabrication of DNA extraction device with tethered poly(N-isopropylacrylamide) brushes on silicon surface for a specific DNA detection
|
Chen, J.K.;Li, J.Y. |
| 臺大學術典藏 |
2019-11-04T06:41:57Z |
Fabrication of double-sided micro-lens array using UV injection molding
|
Chen, Y. H.;SEN-YEU YANG;Chen, X. L.;Ke, K. C.;Chang, N. W.; Chang, N. W.; SEN-YEU YANG; Ke, K. C.; Chen, X. L.; Chen, Y. H. |
| 臺大學術典藏 |
2020-01-13T08:23:12Z |
Fabrication of double-sided micro-lens array using UV injection molding
|
Chen, X.-L.; Ke, K.-C.; Chang, N.-W.; Chen, Y.-H.; Yang, S.-Y.; SEN-YEU YANG |
| 國立高雄應用科技大學 |
2013 |
Fabrication of dual brightness enhancement structures on light guide plates using UV roll-to-plate imprinting lithography
|
Yang, Jen-Chih; Huang, Chung-Ching |
| 國家衛生研究院 |
2023-05-08 |
Fabrication of eco-friendly wearable strain sensor arrays via facile contact printing for healthcare applications
|
Wu, SD;Hsu, SH;Ketelsen, B;Bittinger, SC;Schlicke, H;Weller, H;Vossmeyer, T |
| 國家衛生研究院 |
2023-09-20 |
Fabrication of eco-friendly wearable strain sensor arrays via facile contact printing for healthcare applications (small methods 9/2023)
|
Wu, SD;Hsu, S;Ketelsen, B;Bittinger, SC;Schlicke, H;Weller, H;Vossmeyer, T |
| 國立臺灣科技大學 |
2020 |
Fabrication of edge rounded polylactic acid biomedical stents by the multi-axis micro-milling process
|
Chang, F.-Y.;Chen, Y.-C.;Liang, T.-H.;Cai, Z.-Y. |
| 國立成功大學 |
2016-08 |
Fabrication of efficient polymer light-emitting diodes using water/alcohol soluble poly(vinyl alcohol) doped with alkali metal salts as electron-injection layer
|
Wu, Cheng-Liang; Lin, Cheng-Yi; Chen, Yun |
| 國立聯合大學 |
2007 |
Fabrication of egg-shell-roofed macroporous nickel films by a template-mediated electrodeposition process
|
Y. W. Chung, I. C. Leu*, J. H. Lee, J. H. Yen, and M. H. Hon |
| 國立成功大學 |
2007-12-31 |
Fabrication of egg-shell-roofed macroporous nickel films by a template-mediated electrodeposition process
|
Chung, Yi-Wen; Leu, Ing-Chi; Lee, Jian-Hong; Yen, Jung-Hsien; Hon, Min-Hsiung |
| 國立臺灣科技大學 |
2020 |
Fabrication of electroactive polypyrrole-tungsten disulfide nanocomposite for enhanced in vivo drug release in mice skin
|
Hsiao, P.F.;Anbazhagan, R.;Tsai, H.-C.;krishnamoorthi, Rajakumari;Lin, S.-J.;Lin, S.-Y.;Lee, K.-Y.;Kao, C.-Y.;Chen, R.-S.;Lai, J.-Y. |
| 大葉大學 |
2011-09-15 |
Fabrication of electrodes on the aluminum doped zinc oxide thin films using an ultraviolet laser direct-patterning technology
|
Hsiaoa, Wen-Tse;Tseng, Shih-Feng;Kuo, Chao-Hui;Huang, Kuo-Cheng;Chiang, Donyau;Yao, Pin-Chuan;Chen, Ming-Fei |
| 大葉大學 |
2011-03-23 |
Fabrication of electrodes on the aluminum doped zinc oxide thin films using an ultraviolet laser direct-patterning technology
|
Hsiao, Wen-Tse;Tseng, Shih-Feng;Kuo, Chao-Hui;Huang, Kuo-Cheng;Donyau, Chiang;Yao, Pin-Chuan;Chen, Ming-Fei |
| 國立交通大學 |
2014-12-08T15:29:53Z |
Fabrication of electrolyte supported micro-tubular SOFCs using extrusion and dip-coating
|
Hsieh, Wen-Shuo; Lin, Pang; Wang, Sea-Fue |
| 國立臺灣科技大學 |
2011 |
Fabrication of electrospun polyacrylonitrile ion-exchange membranes for application in lysozym
|
Chiu, H.T.;Lin, J.M.;Cheng, T.H.;Chou, S.Y. |
| 國立交通大學 |
2017-04-21T06:55:45Z |
Fabrication of Electrospun Polymer Fibers with Nonspherical Cross-Sections Using a Nanopressing Technique
|
Chen, Jiun-Tai; Kao, Yi-Huei; Kuo, Tyng-Yow; Liu, Chih-Ting; Chiu, Yu-Jing; Chu, Chien-Wei; Chi, Mu-Huan; Tsai, Chia-Chan |
| 臺北醫學大學 |
2019-06-24 |
FABRICATION OF ELECTROSPUN POLYSULFONE (PSF) MICROTUBE ARRAY MEMBRANE (MTAM) FOR ENDOTOXIN REMOVAL
|
Cheng, Li-Wei; 鄭力瑋 |
| 國立成功大學 |
2023-10 |
Fabrication of elliptically constructed liquid crystalline elastomeric scaffolds for 3D artificial tissues
|
Chang;Kai-Ti;Hung;Yi-Hua;Chiu;Zi-Yun;Chang;Jia-Ying;Yen;Kai-Ting;Liu;Yen, Chang |
| 國立交通大學 |
2018-08-21T05:54:01Z |
Fabrication of Embedded Silver Nanowires on Arbitrary Substrates with Enhanced Stability via Chemisorbed Alkanethiolate
|
Liu, Gui-Shi; Qiu, Jing-Shen; Xu, Duo-Hua; Zhou, Xianzhong; Zhong, Dingyong; Shieh, Han-Ping D.; Yang, Bo-Ru |
| 國立成功大學 |
2011-07-15 |
Fabrication of enhanced anodic aluminum oxide performance at room temperatures using hybrid pulse anodization with effective cooling
|
Chung, C. K.; Chang, W. T.; Liao, M. W.; Chang, H. C.; Lee, C. T. |
| 國立交通大學 |
2014-12-08T15:39:55Z |
Fabrication of epitaxial ZnO films by atomic-layer deposition with interrupted flow
|
Ku, Ching-Shun; Huang, Jheng-Ming; Lin, Chih-Ming; Lee, Hsin-Yi |
| 國立臺灣科技大學 |
2016 |
Fabrication of Fe2O3/TiO2 oxygen carriers for chemical looping combustion and hydrogen generation
|
Liu, Y.-C;Ku, Y;Tseng, Y.-H;Lee, H.-Y;Kuo, Y.-L. |
| 國立臺灣科技大學 |
2015 |
Fabrication of ferrocene modified microsensors for the sensitive detection of glutamate
|
Tseng, Tseng T.T.-C;Chen, P.W.-H;Chang, L.H.-Y. |
| 臺大學術典藏 |
2018-06-28T17:39:14Z |
Fabrication of ferroelectric lead iron tungstate ceramics via a two-stage solid-state reaction
|
Wong, Yeak-Chong; Lu, Chung-Hsin; Wong, Yeak-Chong; Lu, Chung-Hsin |
| 國立臺灣大學 |
1995 |
Fabrication of ferroelectric lead iron tungstate ceramics via a two-stage solid-state reaction
|
Lu, Chung-Hsin; Wong, Yeak-Chong |
| 國立臺灣科技大學 |
2009 |
FABRICATION OF FERROELECTRIC NANOFILMS USING MICROWIRES
|
Ke-Heng Lai; M B Suresh; Tsung-Her Yeh ; Chen-Chia Chou |
| 臺大學術典藏 |
2018-09-10T09:47:41Z |
Fabrication of few-mode crystalline core fiber
|
Chuang, C.-W.;Wang, W.-L.;Lo, F.-Y.;Liu, C.-N.;Huang, Y.-C.;Chou, T.-L.;Cheng, W.-H.;Huang, S.-L.; Chuang, C.-W.; Wang, W.-L.; Lo, F.-Y.; Liu, C.-N.; Huang, Y.-C.; Chou, T.-L.; Cheng, W.-H.; Huang, S.-L.; SHENG-LUNG HUANG |
| 臺北市立大學 |
2005 |
Fabrication of fiber gratings using a heating process
|
Chi, Lipin; Liu, Wen-Fung; Lin, K. H.; Bor, Sheau-Shung; 林奎輝; 劉文豐; 柏小松 |
| 元智大學 |
2011-09-19 |
Fabrication of field emission lamps using dip-coated nano carbonaceous emitters
|
K.J. Chung; S.J. Gao; Y.M. Liu; N.W. Pu; M.D. Ger |
| 華夏技術學院 |
1997-01 |
Fabrication of Field Emitters and Its Application to Flat Panel Display
|
李憲中 |
| 中原大學 |
2000-05-16 |
Fabrication of field emitting tips
|
Szetsen Steven Lee |
| 元智大學 |
2009-05 |
Fabrication of field-effect transistors based on Fe3+-doped titania by sol–gel methods
|
廖朝光; 周文偉 |
| 國立成功大學 |
2018 |
Fabrication of field-sequential color display using predesigned Ferroelectric liquid crystals
|
Liu, C.-Y.;Zhang, Y.-S.;Liu, J.-H. |
| 淡江大學 |
2003-10 |
Fabrication of Film Type Heat Pipes
|
康尚文 |
