| 國立臺灣海洋大學 |
2007-03-25 |
Fabrication of Mg-Y-Cu Bulk Metallic Glass by Mechanical Alloying and Hot Consolidation
|
P. Y. Lee;W. C. Liu;C. K. Lin;J. C. Huang |
| 國立中山大學 |
2007 |
Fabrication of Mg-Y-Cu Bulk Metallic Glass by Mechanical Alloying and Hot Consolidation
|
P.Y. Lee;W.C. Liu;C.K. Lin;J.C. Huang |
| 國立臺灣大學 |
2010 |
Fabrication of micro ball joint by using micro-EDM and electroforming
|
Lin, Chang-Sheng; Liao, Yunn-Shiuan; Cheng, Yi-Ting; Lai, Yunn-Cheng |
| 國立臺灣師範大學 |
2014-10-30T09:36:19Z |
Fabrication of micro free standing structure in p-type silicon using an electrochemical etching technique
|
楊啟榮; 林明憲; 湯杜翔; 鍾武雄; Yang; Chii-Rong; Lin; Ming-Hsien; Tang; Du-Hsiang; Chung; Wu-Hsung |
| 淡江大學 |
2002-05 |
Fabrication of micro radial grooved heat pipes
|
康尚文; Kang , Shung-wen; Tsai, Sheng-hong; Chen, Hong-chih |
| 元智大學 |
2008-09 |
Fabrication of Micro Sensors on a Flexible Substrate
|
李其源; Guan-Wei Wu; Wei-Jung Hsieh |
| 元智大學 |
2009-01 |
Fabrication of micro temperature sensor and heater in a stainless steel-based micro reformer
|
李其源; 李碩仁; Wen-Pin Shih; Chen-Hen Lin; Chi-Chung Chang; Pei-Zen Chang |
| 元智大學 |
2009-01 |
Fabrication of micro temperature sensor and heater in a stainless steel-based micro reformer
|
李其源; 李碩仁; Wen-Pin Shih; Chen-Hen Lin; Chi-Chung Chang; Pei-Zen Chang |
| 元智大學 |
2007-08 |
Fabrication of micro temperature sensor on the flexible substrate
|
李其源; 李碩仁; Guan-Wei Wu |
| 元智大學 |
2007-08 |
Fabrication of micro temperature sensor on the flexible substrate
|
李其源; 李碩仁; Guan-Wei Wu |
| 元智大學 |
2012-12-06 |
Fabrication of micro trapezoidal strip
|
Tzu-Yao Hong; Yi-Hsin Lan; Mao-Kuo Wei; Chi-Feng Lin; Tien-Lung Chiu; Jiun-Haw Lee |
| 國立勤益科技大學 |
2012-04-18 |
Fabrication of micro-channel arrays on thin stainless steel sheets for proton exchange membrane fuel cells using micro-stamping technology
|
Ye, Tsung-Chia ChenEmail authorJiun-Ming |
| 國立勤益科技大學 |
2012-05 |
Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure
|
洪榮崇 |
| 國立勤益科技大學 |
2012-05 |
Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure hydroforming apparatus
|
洪榮崇 |
| 國立交通大學 |
2014-12-08T15:22:35Z |
Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure hydroforming apparatus
|
Hung, Jung-Chung; Lin, Chih-Chia |
| 國立臺灣科技大學 |
2005 |
Fabrication of micro-lens array using dynamic mask projecting system and research electroforming technology
|
Jeng T.-W.; Wang C.-C.; Hsu F.-H.; Liu W.-C.; Jeng J.-Y. |
| 國立臺灣大學 |
2005-07 |
Fabrication of micro-lens array using dynamic mask projecting system and research electroforming technology
|
Jeng, Tz-Wei; Wang, Chun-Chih; Hsu, Feng-Hao; Liu, Wei-Chih; Jeng, Jeng-Ywan |
| 臺大學術典藏 |
2018-09-10T04:49:50Z |
Fabrication of micro-optical switch by post-CMOS micromachining process
|
Cheng, Y.-C.; Lee, C.-Y.; Dai, C.-L.; Chen, W.-J.; Chang, P.-Z.; Chen, P.-H.; PING-HEI CHEN |
| 臺大學術典藏 |
2020-01-13T08:23:10Z |
Fabrication of micro-optical switch by post-CMOS micromachining process
|
Cheng, Y.-C.; Lee, C.-Y.; Dai, C.-L.; Chen, W.-J.; Chang, P.-Z.; Chen, P.-H.; PING-HEI CHEN |
| 義守大學 |
2015-02 |
Fabrication of Micro-Pattern on Flexible Substrate Using Pulsed Electroplating Techniques
|
Yu-Jung Huang;Wei-Han Huang;Shen-Li Fu |
| 元智大學 |
2010 |
Fabrication of micro-sensors based on a parylene thin-film substrate for monitoring proton exchange membrane fuel cells
|
李其源; Chienliu Chang; Pin-Cheng Chan; Ren-De Huang; Maing-Sao Tong |
| 元智大學 |
2010-01 |
Fabrication of micro-sensors based on a parylene thin-film substrate for monitoring proton exchange membrane fuel cells
|
李其源; Chienliu Chang; Pin-Cheng Chan; Ren-De Huang; Maing-Sao Tong |
| 國立成功大學 |
2011 |
Fabrication of Micro-textured Structure as Anti-reflection Layers by Imprint-patterning Process on GaAs Solar Cells to Enhance the Conversion Efficiency
|
WU, Tzung-Han; SU, Yan-Kuin; CHENG, Chiao-Yang; LEE, Yi-Wen |
| 國立成功大學 |
2024-04 |
Fabrication of Microalgae Oil Vesicles for Drug Delivery Applications
|
Lin;-Chen, Yu;Arief;Thahirah;Mondal;Sonali;Pen;Yu;Chang;-Hsiang, Chien |
| 國立彰化師範大學 |
2003-05 |
Fabrication of Microbowtie Structures for Optical Probing of Nanoscale Objects
|
Tseng, A. A. ; Diaz, R. E. ; Chen, C. D. ; Wu, Cen-Shawn |
| 國立彰化師範大學 |
2002-07 |
Fabrication of Microbowtie Structures Using Electron-beam Lithography for a New Optical Probe
|
Tseng, Ampere A. ;Chen, C. D. ; Wu, Cen-Shawn; Diaz, Rodolfo E. |
| 國立交通大學 |
2014-12-08T15:13:46Z |
Fabrication of microcavity light-emitting diodes using highly reflective AlN-GaN and Ta2O5-SiO2 distributed Bragg mirrors
|
Huang, G. S.; Lu, T. C.; Kuo, H. C.; Wang, S. C.; Chen, Hou-Guang |
| 義守大學 |
2007-07 |
Fabrication of microcavity light-emitting diodes using highly reflective AlN-GaN and Ta2O5-SiO2 distributed Bragg mirrors
|
G. S. Huang;T. C. Lu;H. C. Kuo;S. C. Wang;Hou-Guang Chen; 陳厚光 |
| 臺北醫學大學 |
2011 |
Fabrication of microfluidic chip using micro-hot embossing with micro electrical discharage machining mold
|
Huang, M.S.;Chiang, Y.C.;Lin, S.C.;Cheng, H.C.;Huang, C.F.;Shen, Y.K.;Lin, Y. |
| 臺北醫學大學 |
2011 |
Fabrication of microfluidic chip using micro-hot embossing with micro electrical discharage machining mold
|
M.S.Huang;Y.C.Chiang;S.C.Lin;H.C.Cheng;C.F.Huang;Y.K.Shen;Y.Lin |
| 臺北醫學大學 |
2010 |
Fabrication of microfluidic chip using micro-hot embossing with micro electrical discharge machining mold
|
Cheng, Hsin-Chung;Chiang, Yuh-Chyun;Huang, Chiung-Fang;Shen, Yung-Kang;Lin, Yi |
| 臺北醫學大學 |
2010 |
Fabrication of microfluidic chip using micro-hot embossing with micro electrical discharge machining mold
|
Cheng, Hsin-Chung;Chiang, Yuh-Chyun;Huang, Chiung-Fang;Shen, Yung-Kang;Lin, Yi |
| 臺北醫學大學 |
2012 |
Fabrication of microfluidic chip using micro-hot embossing with micro eletrical discharge maching mold
|
Huang, Mao-Suan;Chiang, Yuh-Chyun;Lin, Sheng-Chieh;Cheng, Hsin-Chung;Huang, Chiung-Fang;Shen, Yung-Kang;Lin, Yi |
| 臺北醫學大學 |
2012 |
Fabrication of microfluidic chip using micro-hot embossing with micro eletrical discharge maching mold
|
Huang, Mao-Suan;Chiang, Yuh-Chyun;Lin, Sheng-Chieh;Cheng, Hsin-Chung;Huang, Chiung-Fang;Shen, Yung-Kang;Lin, Yi |
| 國立成功大學 |
2009-12 |
Fabrication of microfluidic devices for packaging CMOS MEMS impedance sensors
|
Jang, Ling-Sheng; Wu, Chun-Ching; Liu, Chia-Feng |
| 國立交通大學 |
2014-12-08T15:16:51Z |
Fabrication of microfluidic devices using dry film photoresist for microchip capillary electrophoresis
|
Tsai, YC; Jen, HP; Lin, KW; Hsieh, YZ |
| 國立成功大學 |
2017-11 |
Fabrication of microfluidic paper-based analytical devices by filtration-assisted screen printing
|
Juang;Yi-Je;Li;Wei-Syuan;Chen;Po-Sheng |
| 義守大學 |
2011-01 |
Fabrication of Microfluidic Rapid Micromixer
|
Hsiang-Chen Hsu;Hsi-Chien Liu;Cheng-Jiun Han |
| 中華大學 |
2005 |
Fabrication of Microfluidic System by Hot Embossing and Selective Plasma Surface Modification Method
|
簡錫新; Chien, H. H. |
| 國立臺灣科技大學 |
2005 |
Fabrication of microlens array with graduated sags using UV proximity printing method
|
Yang H.; Chao C.-K.; Lin T.-H.; Lin C.-P. |
| 臺大學術典藏 |
2018-09-10T08:41:45Z |
Fabrication of microlens arrays by a rolling process with soft polydimethylsiloxane molds
|
Hu, C.-N.;Hsieh, H.-T.;Su, G.-D.J.; Hu, C.-N.; Hsieh, H.-T.; Su, G.-D.J.; GUO-DUNG JOHN SU |
| 國立臺灣科技大學 |
2009 |
Fabrication of microlens arrays by using nano-particle fluid imprinting technology
|
Weng Y.-J.; Weng Y.-C.; Huang J.-C.; Wong Y.-C.; Yang S.-Y.; Liu H.-K. |
| 國立交通大學 |
2017-04-21T06:49:36Z |
Fabrication of Microlens Arrays by Using Nano-Particle Fluid Imprinting Technology
|
Weng, Yung-Jin; Weng, Yung-Chun; Huang, Jen-Ching; Wong, Yong-Cheng; Yang, Sen-Yeu; Liu, Hsu-Kang |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
Fabrication of microlens arrays by using nano-particle fluid imprinting technology
|
Weng, Y.-J.; Weng, Y.-C.; Huang, J.-C.; Wong, Y.-C.; Yang, S.-Y.; Liu, H.-K.; SEN-YEU YANG |
| 國立成功大學 |
2009-12 |
Fabrication of microlens arrays in photosensitive glass by femtosecond laser direct writing
|
Lin, C. H.; Jiang, L.; Chai, Y. H.; Xiao, H.; Chen, Shean-Jen; Tsai, H. L. |
| 臺大學術典藏 |
2018-09-10T07:35:59Z |
Fabrication of microlens arrays on a glass substrate by roll-to-roll process with PDMS mold
|
Hu, C.-N.;Su, G.-D.J.; Hu, C.-N.; Su, G.-D.J.; GUO-DUNG JOHN SU |
| 臺大學術典藏 |
2021-11-22T08:09:06Z |
Fabrication of microlens arrays using a CO2-assisted embossing technique
|
Tzu-Chien Huang; Bin-Da Chan; Jyun-Kai Ciou; Sen-Yeu Yang; SEN-YEU YANG |
| 臺大學術典藏 |
2020-01-13T08:23:20Z |
Fabrication of microlens arrays using a CO2-assisted embossing technique
|
Huang, T.-C.; Chan, B.-D.; Ciou, J.-K.; Yang, S.-Y.; SEN-YEU YANG |
| 國立臺灣大學 |
2008-11 |
Fabrication of Microlens Arrays Using CO2-Assisted Embossing Technique
|
Huang, Tzu-Chien; Chan, Bin-Da; Ciou, Jyun-Kai; Yang, Sen-Yeu |
| 國立臺灣大學 |
2008-03 |
Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platform
|
Yang, Sen-Yeu; Cheng, Fang-Sung; Xu, Shu-Wen; Huang, Po-Hsun; Huang, Tzu-Chien |
