| 淡江大學 |
2005-09-15 |
Modelling an experimental methane fuel processor
|
Lin, Shi-tin; Chen, Yih-hang; Yu, Cheng-ching; Liu, Yen-chun; Lee, Chiou-hwang |
| 臺大學術典藏 |
2020-01-06T03:11:05Z |
Modelling an experimental methane fuel processor
|
Lin, S. T.; Chen, Y. H.; Yu, C. C.; Liu, Y. C.; Lee, C. H.; SHIANG-TAI LIN |
| 淡江大學 |
1993-07 |
Modelling Analysis of a Simulated Afterburner with Twin V-gutter Flameholders and Swirling Inlet.
|
Hong, Z. C.; Lin, C. K.; Huang, J. J.; Chen, M. H. |
| 臺大學術典藏 |
1992-07 |
Modelling and algorithms for spare allocation in reconfigurable VLSI
|
Kuo, S.-Y.; Fuchs, W.K.; Kuo, S.-Y.; Fuchs, W.K.; KuoSY |
| 國立臺灣大學 |
1992-07 |
Modelling and algorithms for spare allocation in reconfigurable VLSI
|
Kuo, S.-Y.; Fuchs, W.K. |
| 臺大學術典藏 |
1991-06 |
Modelling and Analysis of Airborne Dust Removal from a Ventilated Airspace
|
Feddes, J. J. R.; Liao, Chung-Min; 廖中明;Feddes, J. J. R.; Liao, Chung-Min;Feddes, J. J. R.; 廖中明; Feddes, J. J. R. |
| 國立臺灣大學 |
1991-06 |
Modelling and Analysis of Airborne Dust Removal from a Ventilated Airspace
|
廖中明; Feddes, J. J. R.; Liao, Chung-Min; Feddes, J. J. R. |
| 國立臺灣科技大學 |
2018 |
Modelling and analysis of delta-connected distribution transformers with symmetrical neutral-grounding structure for microgrid networks
|
Liao R.-N.; Yang N.-C. |
| 國立高雄應用科技大學 |
1986-12 |
MODELLING AND ANALYSIS OF SWITCHED MODE REGULATORS
|
Hsu, Chin-Yuan |
| 國立交通大學 |
2014-12-08T15:25:18Z |
Modelling and capacity analysis of MIMO rician fading channels for mobile-to-mobile communications
|
Wang, LC; Cheng, YH |
| 國立成功大學 |
2014 |
Modelling and characterisation of flat-band roll-off behaviours in LaOx capped high-K/metal-gate NMOSFET with 28 nm CMOS technology
|
Hung, Wen-Han; Juang, Feng-Renn; Fang, Yean-Kuen; Cheng, Tzyy-Ming |
| 國立成功大學 |
2001 |
Modelling and computer simulation of grinding of the ball end type rotating cutter with a constant helical angle
|
Wu, Chang-Tzuoh; Chen, Cha'o-Kuang; Tang, Yu-Yong |
| 國立成功大學 |
2007-09 |
Modelling and control of a power-assisted mobile vehicle based on torque observer
|
Ren, T. J.; Chen, Tien-Chi |
| 國立交通大學 |
2020-10-05T02:02:20Z |
Modelling and Control of Quad Hybrid Engine Levitating Platform
|
Hou, Y. J.; Chen, T. L. |
| 臺大學術典藏 |
2018-09-10T05:26:50Z |
Modelling and controller design of inductor-coupled multimodule DC-DC converter with master-slave current-comparing scheme
|
R. T. Chen; Y.Y. Chen; YUNG-YAW CHEN |
| 國立臺灣大學 |
2005-07 |
Modelling and controller design of inductor-coupled multimodule DC-DC convertor with master-slave current-comparing scheme
|
Chen, R.T.; Chen, Y.Y. |
| 國立交通大學 |
2014-12-08T15:20:52Z |
Modelling and Estimation of Correlated MIMO-OFDM Fading Channels
|
Cheng, Chien-Chun; Chen, Yen-Chih; Su, Yu T. |
| 元智大學 |
2018 |
MODELLING AND EXPERIMENT ANALYSIS FOR REVERSIBLE SOLID OXIDE ELECTROLYSIS CELL POROSITY EFFECT
|
梅傑; Mangaliso Menzi Dlamini |
| 國立成功大學 |
2004-03 |
Modelling and fabrication of step height control of a multilevel Si(100) structure in KOH solution
|
Chung, Chen-Kuei |
| 臺大學術典藏 |
2021-02-20T08:35:42Z |
Modelling and Forecasting of Greenhouse Whitefly Incidence Using Time-Series and ARIMAX Analysis
|
Chiu, L.-Y.; Arcega Rustia, D.J.; Lu, C.-Y.; Lin, T.-T.; Chiu, L.-Y.; Arcega Rustia, D.J.; Lu, C.-Y.; Lin, T.-T.; TA-TE LIN |
| 南台科技大學 |
1993-07 |
Modelling and Frequency Shaped Sliding Mode Control of a Slewing Flexible Arm with Large Deflection
|
黃東雍; Jing-Sin Liu; King Yuan; Tung-Yung Huang |
| 大葉大學 |
2005 |
Modelling and heuristics of FMS scheduling with multiple objectives
|
Low, C.;Yip, Y.;Wu, T.-H. |
| 大葉大學 |
2006 |
Modelling and Heuristics of FMS Scheduling with Multiple Objectives
|
Low, Chinyao;Yip, Yukling;Wu, Tai-Hsi |
| 國立成功大學 |
2004-09 |
Modelling and index analysis of a Delta-type mechanism
|
Hsu, K. S.; Karkoub, M.; Tsai, Mi-Ching; Her, M. G. |
| 臺大學術典藏 |
2021-11-25T04:06:40Z |
Modelling and Measurement of a Buckypaper-based Strain Sensor
|
J-C. Kuo; C.-W. Ma; L.-S. Hsu; Y.-J. Yang; YAO-JOE YANG |
| 國立臺灣大學 |
1985 |
Modelling and Measurement of A Zero-Ripple Switching Convertor
|
Chu; 林呈祥; Chu; Lin, Chen-Shang |
| 國立交通大學 |
2014-12-08T15:01:26Z |
Modelling and measurement of UHF radio propagating through floors in a multifloored building
|
Tarng, JH; Perng, DW |
| 國立成功大學 |
2006-04 |
Modelling and monitoring natural ventilation for conventional kitchens in Taiwan with transoms replaced with porous screens
|
Chiang, Che-Ming; Chang, Kuei-Feng; Lee, Chia-Yen; Chou, Po-Cheng |
| 國立臺灣大學 |
2003 |
Modelling and Optimal Controller Design of Networked Control Systems with Multiple Delays
|
Lian, Feng-Li; Moyne, James; Tilbury, Dawn |
| 臺大學術典藏 |
2018-09-10T04:32:36Z |
Modelling and optimal controller design of networked control systems with multiple delays
|
Lian, F.-L.; Moyne, J.; Tilbury, D.; FENG-LI LIAN |
| 國立成功大學 |
2021 |
Modelling and optimal design of hybrid power system photovoltaic/solid oxide fuel cell for a mediterranean city
|
Melzi, B.;Kefif, N.;El, Haj Assad M.;Delnava, H.;Hamid, A. |
| 國立交通大學 |
2019-08-02T02:15:34Z |
Modelling and optimisation of a two-server queue with multiple vacations and working breakdowns
|
Yang, Dong-Yuh; Chen, Yi-Hsuan; Wu, Chia-Huang |
| 國立臺灣大學 |
1997 |
Modelling and Optimization of the Batchwise Initiator-Initiated/Thermally-Initiated Bulk Polymerization of Styrene
|
林金福; Chen, S. A.; Lin, King-Fu; Chen, S. A. |
| 國立交通大學 |
2014-12-08T15:11:07Z |
Modelling and optimization of the resistance spot welding process via a Taguchi-neural approach in the automobile industry
|
Lin, H-L; Chou, T.; Chou, C-P |
| 亞洲大學 |
2011-01 |
Modelling and optimum design of ultrasonic transducer for therapy application
|
陳永欽;Chen, Yeong-Chin |
| 臺大學術典藏 |
2022-05-24T06:14:26Z |
Modelling and performance evaluation of an overhead hoist transport system in a 300 mm fabrication plant
|
Kuo C.-H.; Kuo C.-H.; CHUNG-HSIEN KUO |
| 嘉南藥理大學 |
2011-02 |
Modelling and predicting the binding mechanics of HIV P1053-0.5P1053-0.5β antibody complex
|
Wang, Yeng-Tseng; Su, Zhi-Yuan |
| 國立交通大學 |
2014-12-16T08:15:01Z |
Modelling and prediction : honoring Seymour Geisser
|
Geisser, Seymour |
| 國立臺灣科技大學 |
2004-03 |
Modelling and Simulation of an Automatic Grinding System using a Hand Grinder
|
Liu, C. H.; Chen, A. ;Wang, Y. T. ; Chen, C.-C. A. |
| 淡江大學 |
2004-06 |
Modelling and simulation of an automatic grinding system using a hand grinder
|
Liu, C. H.; Chen, A.; 王銀添; Wang, Y. T.; Chen, C. C. A. |
| 淡江大學 |
2010-01 |
Modelling and Simulation of Half Car Suspension System with a MR Damper Using RecurDyn and Simulink
|
Tyan, Feng; Lee, Chih-Hsuan; Chen, Chiu-Ling; Shen, Jeng-Fu ;Tu, Shun-Hsu; Jeng, Wes S. |
| 淡江大學 |
2004-06-28 |
Modelling and simulation of particle deposition in centrifugal filtration
|
黃國楨; Hwang, Kuo-jen |
| 淡江大學 |
2005-06-14 |
Modelling and simulation of particle migration in centrifugal filter basket
|
黃國楨; Hwang, Kuo-jen; Shie, Y.C. |
| 國立臺灣海洋大學 |
2001-12 |
Modelling and Verification of High-Assurance Properties of Safety-Critical Systems
|
Jeffrey J. P. Tsai; Eric Y. T. Juan |
| 臺大學術典藏 |
2018-09-10T15:25:59Z |
Modelling Articles Polarity and Identifying Influential Authors through Social Movements
|
Ming-Hung Wang;Chin-Laung Lei; Ming-Hung Wang; Chin-Laung Lei; CHIN-LAUNG LEI |
| 臺大學術典藏 |
2019 |
Modelling bistable tumour population dynamics to design effective treatment strategies
|
Andrey Akhmetzhanov;Kim J.W.;Sullivan R.;Beckman R.A.;Tamayo P.;Yeang C.-H.; Andrey Akhmetzhanov; Kim J.W.; Sullivan R.; Beckman R.A.; Tamayo P.; Yeang C.-H. |
| 東海大學 |
1999-07 |
Modelling business cycles in Taiwan with time-varying Markov-switching models
|
陳仕偉; Chen, Shyh-Wei; 林金龍; Lin, Jin-Lung |
| 東海大學 |
2000-03 |
Modelling business cycles in Taiwan with time-varying Markov-switching models
|
陳仕偉; Chen, Shyh-Wei; 林金龍; Lin, Jin-Lung |
| 國立政治大學 |
2000-03 |
Modelling Business Cycles in Taiwan with Time-Varying Markov-Switching Models
|
Chen, Shyh-Wei;Lin, Jin-Lung; 陳仕偉;林金龍 |
| 東海大學 |
2009 |
Modelling charge transport in DNA using transfer matrices with diagonal terms
|
施奇廷 and R?mer, Rudolf A.; Wells, Stephen A., Shih, Chi-Tin |
