| 國立成功大學 |
2015-12-05 |
Optimization of louvered-fin heat exchanger with variable louver angles
|
Jang, Jiin-Yuh; Chen, Chun-Chung |
| 淡江大學 |
2014-07-11 |
Optimization of Low Wattage Thermosyphon by Taguchi Method and Numerical Simulation
|
Che-yin Lee **1, Hsin-heng Huang 2, Shih-ming Lee 2 and Kwan Ouyang |
| 國立彰化師範大學 |
2009 |
Optimization of Low-growth-rate GaN Buffer Layer for GaN Film Grown on Si(111) by Molecular Beam Epitaxy
|
Fan, J. C. ; Kaun, C. C. ; Lo, Y. Y. ; Wu, C. J. ; Liang, Y. C. ; Lin, C. Y. ; Huang, Man-Fang |
| 南台科技大學 |
2007 |
Optimization of luminance of carbon nano-tubes field emission display
|
高至誠; Yu-cheng Liu; Chih-cheng Kao |
| 國立成功大學 |
2018-08 |
Optimization of lutein production with a two-stage mixotrophic cultivation system with Chlorella sorokiniana MB-1
|
Chen;Chun-Yen;Liu;Chen-Chun |
| 朝陽科技大學 |
2024-04 |
Optimization of lysozyme-modified ion exchange nanofiber membrane for efficient capture of Escherichia coli: Antibacterial and cytotoxic studies
|
Gnoumou, Edouard;Tran, Thi Tam An;Srinophakun, Penjit;Liu, Bing-Lan;Chiu, Chen-Yaw;Lee, Hung-Che;Wang, Chi-Yun;Chen, Kuei-Hsiang;Chang, Yu-Kaung |
| 朝陽科技大學 |
2014-09 |
Optimization of Machine Repair System with Controlling Arrival and Switching Failure
|
張阜民 |
| 國立交通大學 |
2014-12-08T15:48:50Z |
Optimization of machining conditions for turning cylindrical stocks into continuous finished profiles
|
Chen, MC; Su, CT |
| 修平科技大學 |
2007-09 |
Optimization of machining parameters for a light guide plate printing process using Grey relational analysis
|
Te-Chang Tsai; Ko-Ta Chaing; Fu-Ping Chang; Chih-Chung Chou |
| 修平科技大學 |
2007-09 |
Optimization of machining parameters for a light guide plate printing process using Grey relational analysis
|
Te-Chang Tsai; Ko-Ta Chaing; Fu-Ping Chang; Chih-Chung Chou |
| 朝陽科技大學 |
2014-06 |
Optimization of Machining Parameters in ECM of Al/B4C Composites Using Taguchi Method
|
and, S.R.Rao;G.Padmanabhan |
| 國立臺灣大學 |
2003 |
Optimization of Machining Parameters of Wire-EDM Based on Grey Relational and Statistical Analyses
|
Huang, J.T.; Liao, Y.S. |
| 臺大學術典藏 |
2020-01-13T08:25:37Z |
Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses
|
Huang, J.T.; Liao, Y.S.; YUNN-SHIUAN LIAO |
| 元智大學 |
Jul-18 |
Optimization of Machining Parameters Using Fuzzy Taguchi Method for Reducing Tool Wear
|
Tian-Syung Lan; Kai-Chi Chuang; Chen Y.M. |
| 國立交通大學 |
2014-12-08T15:23:56Z |
Optimization of magnetoelectricity in multiferroic fibrous composites
|
Kuo, Hsin-Yi; Wang, Yong-Liang |
| 國立交通大學 |
2014-12-08T15:47:42Z |
Optimization of magnetoelectricity in piezoelectric-magnetostrictive bilayers
|
Kuo, Hsin-Yi; Slinger, Alex; Bhattacharya, Kaushik |
| 國立交通大學 |
2019-04-02T06:00:26Z |
Optimization of magnetoelectricity in piezoelectric-magnetostrictive bilayers
|
Kuo, Hsin-Yi; Slinger, Alex; Bhattacharya, Kaushik |
| 淡江大學 |
1999-11 |
Optimization of mainline traffic via an adaptive coordinated ramp-metering control model with dynamic OD estimation
|
張堂賢; Chang, Tang-hsien; Li, Zhung-yih |
| 國立臺灣大學 |
2002-04 |
Optimization of Mainline Traffic via an Adaptive Coordinated Ramp-Metering Control Model with Dynamic OD Estimation
|
Chang, Tang-Hsien; Li, Zhung-Yih |
| 嘉南藥理大學 |
2021 |
Optimization of manganese recovery from groundwater treatment sludge for the production of highly-efficient Cu(II) and Pb(II) adsorbents
|
Ong, Dennis C.; Tumampos, Stephanie B.; Kan, Chi-Chuan; Pingul-Ong, Sheila Mae B.; Ensano, Benny Marie B.; Luna, Mark Daniel G. de |
| 國立成功大學 |
2006-09 |
Optimization of manufacturing cell formation with a multi-functional mathematical programming model
|
Tsai, Chang-Chun; Lee, Chung-ying |
| 國立臺灣科技大學 |
2009 |
Optimization of matching section of an accelerator with a spatially uniform quadrupole focusing
|
Ovsyannikov A.D.; Ovsyannikov D.A.; Durkin A.P.; Chang S.-L. |
| 國立成功大學 |
2018-12 |
Optimization of material composition to minimize the thermal stresses induced in FGM plates with temperature-dependent material properties
|
Ding;Shuang;Wu;Chih-Ping |
| 國立臺灣科技大學 |
2015 |
Optimization of mechanical properties of UV-cut polyester fiber using a hybrid Taguchi and fuzzy approach
|
Su, T.-L.;Kuo, Y.-L. |
| 義守大學 |
2012-08 |
Optimization of medium composition for improving biomass production of Lactobacillus plantarum Pi06 using the Taguchi array design and the Box-Behnken method
|
Chin-Fa Hwang;Jen-Han Chang;Jer-Yiing Houng;Cheng-Chih Tsai;Chien-Ku Lin;Hau-Yang Tsen |
| 臺大學術典藏 |
2018-09-10T04:29:00Z |
Optimization of Medium Composition for the Production of Extrac-Ellular Amylase by Thermobifida fusca Using a Reponse Surface Methodology
|
Chao-Hsun Yang;Kuan-Chen Cheng;Wen-Hsiung Liu; Chao-Hsun Yang; Kuan-Chen Cheng; Wen-Hsiung Liu; KUAN-CHEN CHENG |
| 國立臺灣大學 |
2003 |
Optimization of medium composition for the production of extracellular amylase by Thermobifida fusca using a response surface methodology
|
Yang C.H.; Cheng K.C.; Liu W.H. |
| 大葉大學 |
2002-11 |
Optimization of Medium E for Poly-γ-glutamic acid Production by Bacillus licheniformis with Response Surface Methodology
|
呂文凱;邱紫與;洪淑嫻 |
| 淡江大學 |
2006-08 |
Optimization of membrane gas separation systems using genetic algorithm
|
張煖; Chang, Hsuan; Hou, Wen-chih |
| 元智大學 |
Nov-15 |
Optimization of Metal Oxides Thickness and Related Organic Electroluminescent Device Performance
|
Tien-Lung Chiu; Ya-Ting Chuang |
| 元智大學 |
Nov-15 |
Optimization of Metal Oxides Thickness and Related Organic Electroluminescent Device Performance
|
Tien-Lung Chiu; Ya-Ting Chuang |
| 元智大學 |
Nov-15 |
Optimization of Metal Oxides Thickness and Related Organic Electroluminescent Device Performance
|
Tien-Lung Chiu; Ya-Ting Chuang |
| 朝陽科技大學 |
2023-02 |
Optimization of metals degradation and vitrification from fly ash using Taguchi design combined with plasma pyrolysis and recycling in cement construction
|
Sanito, Raynard Christianson; Bernuy-Zumaeta, Marcelo; Wang, Wei-Chien; Yang, Hsi-Hsien; You, Sheng-Jie; Wang, Ya-Fen; 楊錫賢 |
| 淡江大學 |
1999-05-12 |
Optimization of methylmercury by microwave-assisted extraction from fish
|
許道平; Hsu, Tau-being; Youu, Hung-wung; Shin, Cheng-ping |
| 國立臺灣大學 |
1998 |
Optimization of Micellar Electrokinetic Chromatographic Separation of Aporphine Alkaloids Using the Overlapping Resolution Mapping Scheme
|
孫紹文; 陳麗雲; SUN, SHAO-WEN; CHEN, LI-YUN |
| 國立成功大學 |
2013-03 |
Optimization of micro milling electrical discharge machining of Inconel 718 by Grey-Taguchi method
|
Lin, Mao-yong; Tsao, Chung-chen; Hsu, Chun-yao; Chiou, Ai-huei; Huang, Peng-cheng; Lin, Yu-cheng |
| 國立高雄第一科技大學 |
2011.11 |
Optimization of Micro-Milling Process with Genetic Algorithm
|
Chiu, Neng Hsin;Weigh, Guo Ting; 邱能信 |
| 國家衛生研究院 |
2004-09-28 |
Optimization of microcarrier cell culture process for the inactivated enterovirus type 71 vaccine development
|
Wu, SC; Liu, CC; Lian, WC |
| 國立臺灣科技大學 |
2010 |
Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser
|
Kuo C.-F.J.;Tu H.-M.;Liang S.-W.;Tsai W.-L. |
| 國立臺灣科技大學 |
2014 |
Optimization of micromilling microchannels on a polycarbonate substrate
|
Chen, P.-C.;Pan, C.-W.;Lee, W.-C.;Li, K.-M. |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
Optimization of micromilling microchannels on a polycarbonate substrate
|
Lee, W.-C.; Li, K.-M.; KUAN-MING LI; Pan, C.-W.; Chen, P.-C. |
| 義守大學 |
2018-01 |
Optimization of Micropump Performance Utilizing a Single Membrane with an Active Check Valve
|
Gia Thinh Bui;Jung-Hao Wang;Jr-Lung Lin |
| 國立交通大學 |
2014-12-08T15:11:06Z |
Optimization of Microspeaker Diaphragm Pattern Using Combined Finite Element-Lumped Parameter Models
|
Bai, Mingsain R.; Liu, Ching-Yu; Chen, Rong-Liang |
| 元智大學 |
2005-07 |
Optimization of Microstrip Antenna Design Based on the Integration of IE3D Commercial Code and Optimization Algorithms
|
廖文照; 侯元昌; 周錫增 |
| 元智大學 |
2005-07 |
Optimization of Microstrip Antenna Design Based on the Integration of IE3D Commercial Code and Optimization Algorithms
|
廖文照; 侯元昌; 周錫增 |
| 高雄醫學大學 |
2011 |
Optimization of microwave-assisted extraction of cajaninstilbene acid and pinostrobin from pigeonpea leaves followed by RP-HPLC-DAD determination
|
張芳榮; Yu Kong;Yuan-Gang Zu;Yu-Jie Fu;Wei Liu;Fang-Rong Chang;Ji Li;Yung-Husan Chen;Su Zhang;Cheng-Bo Gu |
| 中州科技大學 |
2005-06 |
Optimization of MIM feedstock rheological behaviour by experimental analysis
|
吳啟文 |
| 中華大學 |
2010 |
Optimization of MIMO Plastic Injection Molding Using DOE, BPNN, and GA
|
陳文欽; Chen, Wen-chin |
| 國立成功大學 |
2007-10 |
Optimization of mixed-skill multi-line operator allocation problem
|
Kuo, Yi-Yo; Yang, Ta-Ho |
| 朝陽科技大學 |
2025-03 |
Optimization of mixture proportions for self-compacting concrete using TOPSIS method
|
Kesavamoorthi, R;Mohan, Ganesh. G |
