| 國立交通大學 |
2014-12-12T02:55:02Z |
Parametric Stereo Coding中參數抽取與聲道合成之設計
|
李侃峻; Kan-Chun Lee; 劉啟民; 李文傑; Chi-Min Liu; Wen-Chieh Lee |
| 東海大學 |
2001-07-01 |
Parametric Studies for the Fabrication of DNA Chip
|
丁君毅; Ting, S. J. Y. |
| 中國文化大學 |
2012-03 |
PARAMETRIC STUDIES ON BENDING OF TWISTED TIMOSHENKO BEAMS UNDER COMPLEX LOADINGS
|
Chen, WR (Chen, W.-R.) |
| 中國文化大學 |
2014-11 |
Parametric studies on bending vibration of axially-loaded twisted Timoshenko beams with locally distributed Kelvin-Voigt damping
|
Chen, Wei-Ren |
| 中國文化大學 |
2007 |
Parametric studies on buckling loads and critical speeds of microdrill bits
|
Chen, Wel-Ren |
| 中國文化大學 |
2007-08-01 |
Parametric studies on buckling loads and critical speeds of microdrill bits
|
陳為仁 |
| 中原大學 |
1996 |
Parametric Studies on Cable-Stayed Bridges
|
Pao-Hsii Wang;Chiung-Guei Yang |
| 中原大學 |
1993 |
Parametric Studies on Cable-Stayed Bridges
|
Wang, Pao-Hsii;Yang, Chiung-Guei; |
| 中原大學 |
1996-07 |
Parametric Studies on Cable-Stayed Bridges
|
Pao-Hsii Wang;Chiung-Guei Yang |
| 國立交通大學 |
2014-12-08T15:19:27Z |
Parametric study and design of rib-reinforced steel moment connections
|
Chen, CC; Lu, CA; Lin, CC |
| 義守大學 |
2006-08 |
Parametric Study and Optimal Design in Wire Bonding Process for Mini Stack-Die Package
|
Hsiang-Chen Hsu;Shen-Wen Yu;Yu-Teng Hsu;Wei-Yaw Chang;Ming-Jer Lin;Ruei-Ming Lin;Pei-Chieh Chin;Hung-Chun Ho;Ming-Cheng Lu;Cheng-Tung Lee;Chin-Liang Chen;Chien-Hung Liao;Yu-Jung Huang;Shen-Li Fu;Li-Shan Chen |
| 義守大學 |
2006/08/26 |
Parametric Study and Optimal Design in Wire Bonding Process for Mini Stack-Die Package
|
Hsiang-Chen Hsu ; Shen-Wen Yu ; Yu-Teng Hsu ; Wei-Yaw Chang ; Ming-Jer Lin ; Ruei-Ming Lin ; Pei-Chieh Chin ; Hung-Chun Ho ; Ming-Cheng Lu ; Cheng-Tung Lee ; Chin-Liang Chen ; Chien-Hung Liao ; Yu-Jung Huang ; Shen-Li Fu ; Li-Shan Chen |
| 國立成功大學 |
2012-09 |
Parametric study and optimization of louver finned-tube heat exchangers by Taguchi method
|
Hsieh, Ching-Tsun;Jang, Jiin-Yuh |
| 國立交通大學 |
2014-12-08T15:26:50Z |
Parametric study of a resonant switched capacitor DC-DC converter
|
Lin, YC; Liaw, DC |
| 淡江大學 |
2005-01 |
Parametric Study of Aircraft Performance under the Influence of Wake Vortices
|
宛同 |
| 國立中山大學 |
2003 |
Parametric study of dual-band operation in a microstrip-fed uniplanar monopole antenna
|
I.F. Lin; H.M. Chen; K.L. Wong |
| 國立中山大學 |
2003-12 |
Parametric study of dual-band operation in a microstrip-fed uniplanar monopole antenna
|
I.F. Lin; H.M. Chen;K.L. Wong |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
曾憲中 |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
曾憲中 |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
蘇宏明 |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
曾憲中 |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
曾憲中 |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
曾憲中 |
| 建國科技大學 |
2011 |
Parametric Study of Heat Transfer Design on the Thermoelectric Generator System for Engine Waste Heat Recovery
|
曾憲中 |
| 國立成功大學 |
2012-09 |
Parametric study of helix configuration in ribbed lip seal
|
Yang, An-Shik; Wen, Chih-Yung; Tseng, Chun-Shiang; Weng, Ming-Cheng |
| 國立高雄應用科技大學 |
2007 |
Parametric study of injection molding and hot embossing in polymer microfabrication
|
Wu, Cheng-Hsien; Kuo, Hsien-Chang |
| 國立成功大學 |
2013-01 |
Parametric study of protein solution evaporation inside the microwells for micropatterning
|
Lo, Kuo-Feng; Juang, Yi-Je |
| 元智大學 |
2005-03 |
Parametric study of proton-exchange-membrane fuel cell cathode using an agglomerate model
|
尹庚鳴 |
| 義守大學 |
1997 |
Parametric Study of Reflection Characteristics at Ahiral-Chiral Interfaces
|
Ruyen Ro ; Chia-Chi Sung |
| 元智大學 |
2022-01-06 |
Parametric Study of Resin UV LCD 3D Printed Chips for Nucleic Acid Detection
|
郭許宏; 張幼珍 |
| 國立臺灣大學 |
1990-02 |
Parametric Study of Ship-Hull Vibrations
|
陳永祥; Bertran, Ines M.; Chen, Yung-Hsiang; Bertran, Ines M. |
| 國立臺灣大學 |
1989-06 |
Parametric Study of Ship-Hull Vibrations
|
陳永祥; Bertran, Ines M.; Chen, Yung-Hsiang; Bertran, Ines M. |
| 國立中山大學 |
2006 |
Parametric study of spherical micro-lens array
|
R.F. Shyu; C.T. Pan; S.C. Lin |
| 臺大學術典藏 |
1993-04 |
Parametric Study of Structures with Added Viscoelastic Dampers
|
Chang, Kuo-Chun; Elnature, H.; 張國鎮; Elnature, H.; Chang, Kuo-Chun |
| 國立臺灣大學 |
1993-04 |
Parametric Study of Structures with Added Viscoelastic Dampers
|
張國鎮; Elnature, H.; Chang, Kuo-Chun; Elnature, H. |
| 國立成功大學 |
2018-11 |
Parametric study of surface morphology for selective laser melting on Ti6Al4V powder bed with numerical and experimental methods
|
Wu;Yu-Che;Hwang;Weng-Sing;San;Cheng-Hung;Chang;Chih-Hsiang;Lin;Huey-Jiuan |
| 臺大學術典藏 |
2022-05-24T06:18:33Z |
Parametric study of the dynamic motions and mechanical characteristics of power cables for wave energy converters
|
Yang S.-H.;Ringsberg J.W.;Johnson E.; Yang S.-H.; Ringsberg J.W.; Johnson E.; SHUN-HAN YANG |
| 國立成功大學 |
2001-03 |
Parametric study of weighted essentially nonoscillatory schemes for computational aeroacoustics
|
Lin, San-Yih; Hu, Jeu-Jiun |
| 國立成功大學 |
2012 |
Parametric study on a compound-drop spray flame
|
Hsuan, Chung-Yao; Lin, Ta-Hui |
| 國立臺灣科技大學 |
2006 |
Parametric study on bone screw designs for holding power
|
Chao, C.-K.;Hsiao, C.-C. |
| 南亞技術學院 |
2012-05 |
Parametric study on mixed convection heat transfer in an inclined arc-shape cavity
|
Chen, Chin-Lung;Chung, Yun-Chi |
| 國立成功大學 |
2022-06-16 |
Parametric Study on Nonlinear Finite Element Analysis of Prestressed Reinforced Concrete Beam Strengthened by Fiber-Reinforced Plastics
|
Lesmana;Cindrawaty;Hu;Hsuan-Teh;Pan;Tsun-Chen;Lin;Zih-Shu |
| 南台科技大學 |
2007-04 |
Parametric Study on Preparation and Characterization of ZnO:Al Films by Sol-Gel Method for Solar Cells
|
林克默; K. Lin; P. Tsai |
| 國立高雄師範大學 |
2007 |
Parametric study on the design of rectangular-spiral-shaped atenna
|
Chih-Yu Huang;J. S. Kuo;J. J. Wang;C. Y. Huang;L. L. Cheng; 黃智裕 |
| 元智大學 |
2003-05 |
Parametric study on the electrochemical impedance spectroscopy of organic-coated steels in hydrochloric acid solutions
|
尹庚鳴; L. I. Lu |
| 國立成功大學 |
2002 |
Parametric study on the failure of fiber-reinforced composite laminates under biaxial tensile load
|
Lin, Wen-Pin; Hu, Hsuan-Teh |
| 國立臺灣科技大學 |
2009 |
Parametric study on the interface pullout strength of the vertebral body replacement cage using FEM-based Taguchi methods
|
Hsu W.-H.; Chao C.-K.; Hsu H.-C.; Lin J.; Hsu C.-C. |
| 國立臺灣大學 |
2009 |
Parametric study on the interface pullout strength of the vertebral body replacement cage using FEM-based Taguchi methods
|
Hsu, Wen-Hsien; Chao, Ching-Kong; Hsu, Hsi-Ching; Lin, Jinn; Hsu, Ching-Chi |
| 國立臺灣大學 |
2009 |
Parametric Study on the Interface Pullout Strength of the Vertebral Body Replacement Cage Using Fem-Based Taguchi Methods
|
許文賢; 趙振綱; 徐錫靖; 林晉; 徐慶琪; HSU, WEN-HSIEN; CHAO, CHING-KONG; HSU, HSI-CHING; LIN, JINN; HSU, CHING-CHI |
| 國立交通大學 |
2016-03-28T00:04:11Z |
Parametric study on thermal performance of microchannel heat sinks with internal vertical Y-shaped bifurcations
|
Xie, Gongnan; Shen, Han; Wang, Chi-Chuan |
