| 國立臺灣海洋大學 |
2011-08 |
Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication
|
Chau-Chang Chou;Shing-Hoa Wang;Hsien-Hung Chung;Peter K. Liaw;Yung Liou;J.C. Huang;Yuan-Yi Hsu |
| 國立臺灣海洋大學 |
2016-11 |
Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes
|
Yung-Sheng Lin; Chih-Feng Hsu; Jyun-Yu Chen; Yeh-Ming Cheng; Pee-Yew Lee |
| 中國文化大學 |
2002 |
Wear behavior of nitrocarburized JIS SKD61 tool steel
|
Chiu L.H.; Wu C.H.; Chang H |
| 國立臺灣海洋大學 |
2015 |
Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel
|
Tai-Cheng Chen;Chau-Chang Chou;Tung-Yuan Yung;Kun-Chao Tsai;Jiunn-Yuan Huang |
| 國立臺灣海洋大學 |
2016-10 |
Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel.
|
Tai-Cheng Chen;Chau-Chang Chou;Tung-Yuan Yung;Kun-Chao Tsai;Jiunn-Yuan Huang |
| 國立臺灣大學 |
2004-12 |
Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
|
Cho, H. J.; Wei, W. J.; Kao, H. C.; Cheng, C. K. |
| 臺大學術典藏 |
2020-05-12T02:54:21Z |
Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
|
Cho, H.J.; Wei, W.J.; Kao, H.C.; Cheng, C.K.; WEN-CHENG J. WEI |
| 國立交通大學 |
2014-12-08T15:04:33Z |
WEAR BEHAVIOR OF VARIOUS DIAMOND-COATED CUTTING TOOLS UNDER DIFFERENT DEPOSITION CONDITIONS
|
HUANG, TH; KUO, CT; LIN, TS; CHANG, CS |
| 臺大學術典藏 |
2008 |
Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool
|
LiaoYS; Wei, C.C.; Liao, Y.S.; Wei, C.C.; Liao, Y.S. |
| 國立臺灣大學 |
2008 |
Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool
|
Liao, Y.S.; Wei, C.C. |
| 國立臺灣科技大學 |
2020 |
Wear Behaviour and Sustainability of Coated Abrasives in Grinding of Aluminium Alloy Using Minimum Quantity Lubrication
|
Kuo, C.;Yang, J.;Wen, J. |
| 國立臺灣科技大學 |
2018 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Kuo, C.;Wang, C.;Ko, S. |
| 國立臺灣海洋大學 |
2017-11 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Chunliang Kuo; Chihying Wang; Shunkai Ko |
| 國立臺灣科技大學 |
2018 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Kuo, C.;Wang, C.;Ko, S. |
| 臺大學術典藏 |
2018-09-10T07:31:09Z |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
YAO-YANG TSAI;Tsai, Y.Y.;Liao, Y.S.;Luo, S.Y.;YAO-YANG TSAI; Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y.; YAO-YANG TSAI |
| 國立臺灣大學 |
1999 |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y. |
| 臺大學術典藏 |
2020-01-13T08:25:38Z |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y.; YUNN-SHIUAN LIAO |
| 國立成功大學 |
2006-04 |
Wear characteristics of a laser surface alloyed Al-Mg-Si with Co alloy powder
|
Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih |
| 國立臺灣大學 |
2006 |
Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder
|
Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih |
| 臺大學術典藏 |
2018-06-28T21:47:29Z |
Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder
|
Lin, Hsin-Chih; Lee, Shih-Chin; Chuang, Yao-Chih; Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih |
| 國立臺灣大學 |
2005 |
Wear Characteristics of Hole-Machining by Electrochemical Discharge Machining(ECDM)
|
Tsai, Y. Y.; Liao, W. Y.; Peng, Y. S. |
| 國立臺灣大學 |
1992 |
Wear characteristics of sintered diamond composite during circular sawing
|
Liao, Y. S.; Luo, S. Y. |
| 臺大學術典藏 |
2020-01-13T08:25:40Z |
Wear characteristics of sintered diamond composite during circular sawing
|
Liao, Y.S.; Luo, S.Y.; YUNN-SHIUAN LIAO |
| 中原大學 |
1999 |
Wear Debris Generated from A Cup-on-Ball Hip Wear Simulator : Their Morphologies and Compositions
|
Jiunn-Der Liao;Ming-Chen Wang;Chen-Chin Yu |
| 國立成功大學 |
2019 |
Wear Inducing Phase Transformation of Plasma Transfer Arc Coated Tools during Friction Stir Welding with Al Alloy
|
Chen;Kuan-Jen;Hung;Fei-Yi;Lui;Truan-Sheng;Shih;Yong-Ren |
