| 臺大學術典藏 |
2022-04-25T03:57:27Z |
Wear and leakage assessments of canted coil Spring–Energized polytetrafluoroethylene seals under Ultra-High cycle operations
|
Huang T.-C;Tsai J.-W;Liao K.-C.; Huang T.-C; Tsai J.-W; Liao K.-C.; KUO-CHI LIAO |
| 國立交通大學 |
2019-04-03T06:41:19Z |
Wear Behavior and Microstructure of Mg-Sn Alloy Processed by Equal Channel Angular Extrusion
|
Chen, Jung-Hsuan; Shen, Yen-Chen; Chao, Chuen-Guang; Liu, Tzeng-Feng |
| 國立臺灣大學 |
2008 |
Wear Behavior in Turning High Hardness Alloy Steel by CBN Tool
|
Lin, H.M.; Liao, Y.S.; Wei, C.C. |
| 臺大學術典藏 |
2020-01-13T08:25:32Z |
Wear behavior in turning high hardness alloy steel by CBN tool
|
Lin, H.M.; Liao, Y.S.; Wei, C.C.; YUNN-SHIUAN LIAO |
| 國立成功大學 |
2005-11 |
Wear behavior of DC unbalanced magnetron sputter deposited ZrCN films
|
Yao, Shun-Hui; Su, Yean-Liang; Kao, Wen-Hsien; Cheng, Kai-Wen |
| 國立臺灣海洋大學 |
2011-08 |
Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication
|
Chau-Chang Chou;Shing-Hoa Wang;Hsien-Hung Chung;Peter K. Liaw;Yung Liou;J.C. Huang;Yuan-Yi Hsu |
| 國立臺灣海洋大學 |
2016-11 |
Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes
|
Yung-Sheng Lin; Chih-Feng Hsu; Jyun-Yu Chen; Yeh-Ming Cheng; Pee-Yew Lee |
| 中國文化大學 |
2002 |
Wear behavior of nitrocarburized JIS SKD61 tool steel
|
Chiu L.H.; Wu C.H.; Chang H |
| 國立臺灣海洋大學 |
2015 |
Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel
|
Tai-Cheng Chen;Chau-Chang Chou;Tung-Yuan Yung;Kun-Chao Tsai;Jiunn-Yuan Huang |
| 國立臺灣海洋大學 |
2016-10 |
Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel.
|
Tai-Cheng Chen;Chau-Chang Chou;Tung-Yuan Yung;Kun-Chao Tsai;Jiunn-Yuan Huang |
| 國立臺灣大學 |
2004-12 |
Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
|
Cho, H. J.; Wei, W. J.; Kao, H. C.; Cheng, C. K. |
| 臺大學術典藏 |
2020-05-12T02:54:21Z |
Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
|
Cho, H.J.; Wei, W.J.; Kao, H.C.; Cheng, C.K.; WEN-CHENG J. WEI |
| 國立交通大學 |
2014-12-08T15:04:33Z |
WEAR BEHAVIOR OF VARIOUS DIAMOND-COATED CUTTING TOOLS UNDER DIFFERENT DEPOSITION CONDITIONS
|
HUANG, TH; KUO, CT; LIN, TS; CHANG, CS |
| 臺大學術典藏 |
2008 |
Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool
|
LiaoYS; Wei, C.C.; Liao, Y.S.; Wei, C.C.; Liao, Y.S. |
| 國立臺灣大學 |
2008 |
Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool
|
Liao, Y.S.; Wei, C.C. |
| 國立臺灣科技大學 |
2020 |
Wear Behaviour and Sustainability of Coated Abrasives in Grinding of Aluminium Alloy Using Minimum Quantity Lubrication
|
Kuo, C.;Yang, J.;Wen, J. |
| 國立臺灣科技大學 |
2018 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Kuo, C.;Wang, C.;Ko, S. |
| 國立臺灣海洋大學 |
2017-11 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Chunliang Kuo; Chihying Wang; Shunkai Ko |
| 國立臺灣科技大學 |
2018 |
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
|
Kuo, C.;Wang, C.;Ko, S. |
| 臺大學術典藏 |
2018-09-10T07:31:09Z |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
YAO-YANG TSAI;Tsai, Y.Y.;Liao, Y.S.;Luo, S.Y.;YAO-YANG TSAI; Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y.; YAO-YANG TSAI |
| 國立臺灣大學 |
1999 |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y. |
| 臺大學術典藏 |
2020-01-13T08:25:38Z |
Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
|
Luo, S.Y.; Liao, Y.S.; Tsai, Y.Y.; YUNN-SHIUAN LIAO |
| 國立成功大學 |
2006-04 |
Wear characteristics of a laser surface alloyed Al-Mg-Si with Co alloy powder
|
Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih |
| 國立臺灣大學 |
2006 |
Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder
|
Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih |
| 臺大學術典藏 |
2018-06-28T21:47:29Z |
Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder
|
Lin, Hsin-Chih; Lee, Shih-Chin; Chuang, Yao-Chih; Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih |
| 國立臺灣大學 |
2005 |
Wear Characteristics of Hole-Machining by Electrochemical Discharge Machining(ECDM)
|
Tsai, Y. Y.; Liao, W. Y.; Peng, Y. S. |
| 國立臺灣大學 |
1992 |
Wear characteristics of sintered diamond composite during circular sawing
|
Liao, Y. S.; Luo, S. Y. |
| 臺大學術典藏 |
2020-01-13T08:25:40Z |
Wear characteristics of sintered diamond composite during circular sawing
|
Liao, Y.S.; Luo, S.Y.; YUNN-SHIUAN LIAO |
| 中原大學 |
1999 |
Wear Debris Generated from A Cup-on-Ball Hip Wear Simulator : Their Morphologies and Compositions
|
Jiunn-Der Liao;Ming-Chen Wang;Chen-Chin Yu |
| 國立成功大學 |
2019 |
Wear Inducing Phase Transformation of Plasma Transfer Arc Coated Tools during Friction Stir Welding with Al Alloy
|
Chen;Kuan-Jen;Hung;Fei-Yi;Lui;Truan-Sheng;Shih;Yong-Ren |
| 國立高雄第一科技大學 |
2006.01 |
Wear of CrC-coated carbide tools in dry machining
|
Y.L.Su;T.H.Liu;C.T.Su;S.H.Yao;W.H.Kao;K.W.Cheng; 蘇啟宗 |
| 國立成功大學 |
2006-01-10 |
Wear of CrC-coated carbide tools in dry machining
|
Su, Yean-Liang; Liu, Tzuan-Horng; Su, Chih-Tsong; Yao, Shun-Hui; Kao, Wen-Hsien; Cheng, Kai-Wen |
| 國立中山大學 |
1987 |
Wear of in-vivo Alumina Hip Joint, a SEM Study
|
F.S. Liao;D. Gan;P. Shen;S.Z. Liao |
| 國立臺灣大學 |
2003 |
Wear properties of Co–Cr–Mo–N plasma-melted surgical implant alloys
|
Hsu, Hsang-Chung; Lian, Shuang-Shii |
| 國立臺灣海洋大學 |
2010-12 |
Wear Resistance of Porous High Pressure Crystallized UHMWPEs as Artificial Cartilage Biomaterials
|
Chou C. C.;Wang Y. C. |
| 國立臺灣大學 |
2009-01 |
Wear Resistance of SK3 Carbon Tool Steel Coated a Thin Layer of Cobalt Base Alloy and Poly Crystalline Diamond by Laser Brazing
|
Chen, Y.C.; Chiang, K. A. |
| 國立成功大學 |
2006-09-25 |
Wear resistant and anti-corrosive treatment for TI-6AL-4V using metal vapor vacuum arc source in comparison with plasma immersion ion implantation
|
Chang, Chia-Wei; Liao, Jiunn-Der; Chen, Huan-Jen; Chang, Charlie S.F.; Chiu, Song-Mao |
| 國立臺灣科技大學 |
2019 |
Wear Scar Evolution in Refrigeration Oil PAG and ZDDP-PAG Blend Oil under EP Condition
|
Lin, Y.-C.;Guo, Y.-C. |
| 淡江大學 |
2020-06 |
Wear Value Prediction of CNC Turning Tools based on v-GSVR with A new Hybrid Evolutionary Algorithm
|
Huang, Min-Liang;Yang, Jr-syu;Wu, Jheng-yu;Chang, Shih-Hsing |
| 國立臺灣大學 |
2003 |
Wear-through of Metal-Backed Acetabular Shell in Total Hip Arthroplasty
|
黃國淵; 劉華昌; 侯勝茂; HUANG, KOU-YUAN; LIU, HWA-CHANG; HOU, SHENG-MOU |
| 元智大學 |
2019-04-26 |
Wearable and Adaptive Activity Recognition Based on LSTM-enabled Neurogenesis Deep Learning II
|
陳柏翰; 陸敬互; 黃依賢 |
| 元智大學 |
2019-04-26 |
Wearable and Adaptive Activity Recognition Based on LSTM-enabled Neurogenesis Deep Learning II
|
陳柏翰; 陸敬互; 黃依賢 |
| 國立臺灣科技大學 |
2013 |
Wearable and RFID antennas
|
Liu, D.;Shamim, A.;Ma, T.-G.;Ying, Z. |
| 國立交通大學 |
2014-12-08T15:22:16Z |
Wearable and Wireless Brain-Computer Interface and Its Applications
|
Lin, Chin-Teng; Ko, Li-Wei; Chang, Che-Jui; Wang, Yu-Te; Chung, Chia-Hsin; Yang, Fu-Shu; Duann, Jeng-Ren; Jung, Tzyy-Ping; Chiou, Jin-Chern |
| 國立交通大學 |
2017-04-21T06:49:49Z |
Wearable and Wireless Human Body Electrostatic Monitoring System
|
Lin, Nan-Chun |
| 國立交通大學 |
2020-01-02T00:04:23Z |
Wearable Cardiopulmonary Function Evaluation System for Six-Minute Walking Test
|
Lin, Bor-Shing; Jhang, Ruei-Jie; Lin, Bor-Shyh |
| 亞洲大學 |
2015-01 |
Wearable Computing Connecting Gas Sensor to Detector Harmful Air-Implement
|
陳泳輝;Chen, Yung-Hui;王居尉;Wang, Jyu-Wei |
| 亞洲大學 |
2015-01 |
Wearable Computing Connecting Gas Sensor to Detector Harmful Air-Implement
|
陳泳輝;Chen, Yung-Hui;王居尉;Wang, Jyu-Wei |
| 亞洲大學 |
2015-01 |
Wearable Computing Connecting Gas Sensor to Detector Harmful Air-Implement
|
Chen, 陳泳輝 Yung-Hui;Wang, 王居尉 Jyu-Wei |
| 亞洲大學 |
2015/01 |
Wearable Computing Connecting Gas Sensor to Detector Harmful Air-Implement
|
陳泳輝;Yung-Hui Chen;王居尉;Jyu-Wei Wang |
