| 臺大學術典藏 |
2010 |
Optimization of the active-layer morphology with a non-halogenic solvent for bulk-heterojunction polymer solar cells
|
Tsai, Feng-Yu; Pan, Wen-Chueh; Lin, Ching; Lin, Ching; Pan, Wen-Chueh; Tsai, Feng-Yu |
| 國立臺灣大學 |
2010 |
Optimization of the active-layer morphology with a non-halogenic solvent for bulk-heterojunction polymer solar cells
|
Lin, Ching; Pan, Wen-Chueh; Tsai, Feng-Yu |
| 國立彰化師範大學 |
2006-08 |
Optimization of the Active-Layer Structure for the Deep-UV AlGaN Light-Emitting Diodes
|
Huang, Man-Fang; Lu, Tsung-Hung |
| 淡江大學 |
2015-08 |
Optimization of the Antenna Location for Relay Cooperative System by APSO
|
Cheng, Yu-Ting; Chiu, Chien-Ching |
| 國立交通大學 |
2014-12-08T15:41:11Z |
Optimization of the anti-punch-through implant for electrostatic discharge protection circuit design
|
Li, YM; Lee, JW; Sze, SM |
| 國立成功大學 |
2023 |
Optimization of the calcination and two-step sintering temperatures of (K0.48Na0.48Li0.04)(Nb0.95Sb0.05)O3 ceramics
|
Vuong, L.D.;Lich, N.Q.;Cuong, N.X.;Nha, V.Q.;Nhat, Nhat N.D.;Hieu, L.D.;Son, L.P.;Linh, H.T.T.;Chuc, N.H.;Tuyen, Tuyen T.N.A.;Dat, T.N.;Wei, P.-C. |
| 臺大學術典藏 |
2022-05-21T23:36:06Z |
Optimization of the carrier recombination and transmission properties in perovskite LEDs by doping poly (4-vinylpyridine) and graphene quantum dots made of chitin
|
Yan, Zhen Li; Liang, Fang Cheng; Yeh, Chia Yu; Kurniawan, Darwin; Benas, Jean Sebastien; Chen, Wei Cheng; Cho, Chia‐Jung J.; Chiang, Wei Hung; RU-JONG JENG; Kuo, Chi Ching |
| 國立高雄第一科技大學 |
2014 |
Optimization of the Cathode Arc Plasma Deposition Processing Parameters of ZnO Film Using the Grey-Relational Taguchi Method
|
Hsu, Shuo-Fu;Chou, Jyh-Horng;Fang, Chun-Hsiung;Weng, Min-Hang |
| 國家衛生研究院 |
2018-02 |
Optimization of the conical angle design in conical implant-abutment connections: A pilot study based on the finite element method
|
Yao, KT;Chen, CS;Cheng, CK;Fang, HW;Huang, CH;Kao, HC;Hsu, ML |
| 國立交通大學 |
2014-12-08T15:38:00Z |
Optimization of the Cu wire bonding process for IC assembly using Taguchi methods
|
Su, Chao-Ton; Yeh, Cheng-Jung |
| 元智大學 |
Jan-18 |
Optimization of the culture medium for recombinant protein production under the control of the αAmy3 promoter in a rice suspension-cultured cell expression system
|
Yu‑Kuo Liu; Chia‑Wei Lu; Jer‑Yuan Chang ·; Ching‑Fan Lu; Chia‑Chun Tan; Li-Fen Huang |
| 修平科技大學 |
2005 |
Optimization of the design parameters of Parallel-Plain Fin heat sink module cooling phenomenon based on the Taguchi method
|
Ko-Ta Chiang |
| 國立臺灣大學 |
2013 |
Optimization of the detection coil of high-T-c superconducting quantum interference device-based nuclear magnetic resonance for discriminating a minimum amount of liver tumor of rats in microtesla fields
|
Chen, Hsin-Hsien; Huang, Kai-Wen; Yang, Hong-Chang; Horng, Herng-Er; Liao, Shu-Hsien; 黃凱文 |
| 國立成功大學 |
2017 |
Optimization of the Determination Method for Dissolved Cyanobacterial Toxin BMAA in Natural Water
|
Yan, B.;Liu, Z.;Huang, R.;Xu, Y.;Liu, D.;Lin, T.-F.;Cui, F. |
| 大葉大學 |
2005-02 |
Optimization of the Dual Energy Integration Mechanism in a Parallel-type Hybrid Vehicle
|
Tzeng, S.C.;Chen, C.C. |
| 國立成功大學 |
2014-09-23 |
Optimization of the dye-sensitized solar cell performance by mechanical compression
|
Meen, Teen Hang; Tsai, Jenn Kai; Tu, Yu Shin; Wu, Tian Chiuan; Hsu, Wen Dung; Chang, Shoou-Jinn |
| 國立臺灣科技大學 |
2008 |
Optimization of the dyeing process and prediction of quality characteristics on elastic fiber blending fabrics
|
Kuo, C.F.J.;Chang, C.D.;Su, T.L.;Fu, C.T. |
| 國立臺灣科技大學 |
2000 |
Optimization of the Electrical Discharge Machining Process Based on the Taguchi Method with Fuzzy Logics
|
Lin, J.L.;Wang, K.S.;Yan, B.W.;Tarng, Y.S. |
| 國立臺灣科技大學 |
2004 |
Optimization of the Electrical Discharge Machining Process Using the GA-based Neural Network
|
Su, J.C.;Kao, J.Y.;Tarng, Y.S. |
| 國立臺灣科技大學 |
2006 |
Optimization of the electron-beam-lithography parameters for the moth-eye effects of an antireflection matrix structure
|
Kuo, C.-F.J.;Tu, H.-M.;Su, T.-L. |
| 國立臺灣大學 |
2002-12 |
Optimization of the enzymic process for manufacturing low-lactose milk containing oligosaccharides
|
Chen, C.-S.; Hsu, C.-K.; Chiang, B.-H. |
| 輔英科技大學 |
1999-07-15 |
Optimization of the Experimental Conditions for the Preparation of a Thin Barium Titanate Film by Hydrothermal Process
|
謝慶燮 |
| 國立成功大學 |
2011-10 |
Optimization of the exponential stabilization problem in active suspension system using PSO
|
Tung, Shen-Lung; Juang, Yau-Tarng; Lee, Wei-Hsun; Shieh, Wern-Yarng; Wu, Wei-Ying |
| 國立臺灣大學 |
1988 |
Optimization of the Expression of a Foreign Gene from Galactose- Inducible Promoter in a Recombinant Yeast
|
Lin, Kong-Hua; 黃世佑; Iijima, Shinji; Hishinuma, Fumio; Kobayashi, Takeshi; Lin, Kong-Hua; Huang, Shih-Yow; Iijima, Shinji; Hishinuma, Fumio; Kobayashi, Takeshi |
| 國立臺灣科技大學 |
2009 |
Optimization of the extrusion process for magnesium alloy sheets using the fuzzy-based Taguchi method
|
Hsiang S.-H.; Lin Y.-W. |
| 國立暨南國際大學 |
2009 |
Optimization of the Fabrication Process for ZnO Thin-Film Transistors with HfO2 Gate Dielectrics
|
陳建亨?; Chen, HJH |
| 國立暨南國際大學 |
2009 |
Optimization of the Fabrication Process for ZnO Thin-Film Transistors with HfO2 Gate Dielectrics
|
葉柏良?; Yeh, BBL |
| 國立臺灣科技大學 |
2006 |
Optimization of the film coating process for polymer blends by the grey-based Taguchi method
|
Kuo, C.-F.J.;Wu, Y.-S. |
| 國立交通大學 |
2014-12-08T15:17:04Z |
Optimization of the growth of the InGaP etch-stop layer by MOVPE for InGaP/GaAs HBT device application
|
Hsieh, YC; Chang, EY; Yeh, SS; Chang, CW; Luo, GL; Chang, CY; Lee, CT |
| 國立臺灣大學 |
2003 |
Optimization of the Growth Rate of Probiotics in Fermented Milk Using Genetic Algorithms and Sequential Quadratic Programming Techniques
|
Chen, MJ; Chen; KN; Lin, CW |
| 臺大學術典藏 |
2018-09-10T04:27:25Z |
Optimization of the growth rate of probiotics in fermented milk using genetic algorithms and sequential quadratic programming techniques
|
Chen, M.-J.;Chen, K.-N.;Lin, C.-W.; Chen, M.-J.; Chen, K.-N.; Lin, C.-W.; MING-JU CHEN |
| 元智大學 |
2022-12 |
Optimization of the growth temperature and periods for improving the optical properties of SWIR Type-II super lattice for Infrared Photodetectors
|
Yung-Jyun Liao; Wei-Sheng Liu; Hou-Yi Chen; Pin-Chih Liu; Balaji. G; Kai-Yang Hsu; Jen-Inn Chyi |
| 元智大學 |
2022-12-02 |
Optimization of the growth temperature and periods for improving the optical properties of SWIR Type-II super lattice for Infrared Photodetectors
|
Yung-Jyun Liao; Hou-Yi Chen; Pin-Chih Liu; Balaji G; Kai-Yang Hsu; Wei-Sheng Liu; Jen-Inn Chyi |
| 國立交通大學 |
2014-12-08T15:07:48Z |
Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach
|
Lin, Hsuan-Liang; Chou, Chang-Pin |
| 國立交通大學 |
2014-12-08T15:41:44Z |
Optimization of the headspace solid-phase microextraction for determination of glycol ethers by orthogonal array designs
|
Huang, CT; Su, YY; Hsieh, YZ |
| 國立臺灣大學 |
1991-06 |
Optimization of the Heat Exchanger for the Roto-Cooler Air Conditioning Systems
|
黃元茂; Huang, Yuan-Mao |
| 國立高雄第一科技大學 |
2005.12 |
Optimization of the High-Speed CNC Milling Process Using Two-Phase Parameter Design Strategy by the Taguchi Methods
|
Tzeng, Yih-Fong;Chen, Fu-Chen; 曾義豐 |
| 國立成功大學 |
2008-07-15 |
Optimization of the highly strained InGaAs/GaAs quantum well lasers grown by MOVPE
|
Su, Yan-Kuin; Chen, W. C.; Wan, C. T.; Yu, H. C.; Chuang, R. W.; Tsai, M. C.; Cheng, K. Y.; Hu, C.; Tsau, Seth |
| 國立臺灣科技大學 |
2012 |
Optimization of the hybrid asymmetric-FIR/analog square-root filters
|
Yao, C.-Y.;Ho, Y.-H.;Hsia, W.-C. |
| 南亞技術學院 |
2011-07 |
OPTIMIZATION OF THE INJECTION MOLDING PROCESS FOR SHORT-FIBER-REINFORCED COMPOSITES
|
Chen, Ch. -Sh.;Chen, T. -J.;Chen, Sh. -Ch.;Chien, R. -D. |
| 國立成功大學 |
2017 |
Optimization of the LCD optical film cutting problem
|
Huang;Yeu-Shiang;Wang;Shiang-An;Fang;Chih-Chiang |
| 國立交通大學 |
2014-12-08T15:06:46Z |
Optimization of the lens holder and yoke for a near-field optical pickup actuator to enhance frequency response
|
Peng, Ming-Tsan; Huang, Hai-Jo; Wu, Chun-Te; Lee, Kwen-Jin; Yang, Lei-Ming; Chang, Chi-Shen; Ke, Chau-Yuan; Wang, Shyh-Jier; Jeng, Tzuan-Ren; Ju, Jau-Jiu |
| 國立聯合大學 |
2008 |
Optimization of the Liquid Crystal Displays with Phase- Separated Composite Films
|
Shun-Jian Hwang, Sheng-Chieh Chen, Chang-Chun Lai, Shi-Ming Chen, Shug-June Hwang |
| 國立臺灣大學 |
2009 |
Optimization of the Long-Term Capacity Planning Process for Taiwan Railway Administration
|
Shih, Mei-Cheng; Lai, Yung-Cheng |
| 國立交通大學 |
2020-10-05T01:59:42Z |
OPTIMIZATION OF THE LOUVER FIN-AND-TUBE HEAT EXCHANGERS-A PARAMETRIC APPROACH
|
Sadeghianjahromi, Ali; Kheradmand, Saeid; Nemati, Hossain; Wang, Chi-Chuan |
| 輔英科技大學 |
2009-08 |
Optimization of the Medium Components by Statistical Experimental Methods to Enhance Nattokinase Activity
|
Jau-Kai Wang; Hua-Hsien Chiu; Ching-Shieh Hsieh |
| 義守大學 |
2006-02 |
Optimization of the medium composition for the submerged culture of Ganoderma lucidum by Taguchi array design and steepest ascent method
|
Ming-Yao Chang;Guo-Jane Tsai;Jer-Yiing Houng |
| 國立臺灣海洋大學 |
2006-02-01 |
Optimization of the medium composition for the submerged culture of Ganoderma lucidum by Taguchi array design and steepest ascent method
|
Ming-Yao Chang;Guo-Jane Tsai;Jer-Yiing Houng |
| 國立臺灣科技大學 |
1998 |
Optimization of the Multi-Response Process by the Taguchi Method with the Grey Relational Analysis
|
Lin, J.L.;Tarng, Y.S. |
| 國立交通大學 |
2017-04-21T06:55:33Z |
Optimization of the nanotwin-induced zigzag surface of copper by electromigration
|
Chen, Hsin-Ping; Huang, Chun-Wei; Wang, Chun-Wen; Wu, Wen-Wei; Liao, Chien-Neng; Chen, Lih-Juann; Tu, King-Ning |
